Abstract
Iron oxide nanoparticles (IONPs) have great importance due to their use in many biomedical applications such as contrast agents in MRI, repairing of tissues, detoxification of biological fluids, cell separation, drug delivery, immunoassay, and magnetic hyperthermia. One of the interesting properties of IONPs is to produce heat in the presence of an applied alternating magnetic field (AMF), the basic principle of magnetic hyperthermia. Here, we seek synthetic reproducibility and to optimize Fe3O4 NPs to use in magnetic hyperthermia applications. We compared the thermal efficiency of Fe3O4 NPs after doping with copper. Using co-precipitation methodology, pure and Cu-doped Fe3O4 NPs were synthesized at five different concentrations (2%, 4%, 5%, 8%, and 10%). X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to study the crystal structure and surface morphology of nanomaterials. Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, and UV–visible spectroscopy were used to investigate the functional group, vibrational and optical properties of NPs. The thermal response of doped and undoped Fe3O4 NPs was studied by using high-frequency electromagnet driver for hyperthermia applications (HFEDHA) at 53 kHz frequency and 270 Oe magnetic field strength. To check the effects of suspension medium and variation of NP concentration in the sample on heat response and on specific absorption rate (SAR) values, the hyperthermia studies have been investigated in three biological mediums water, glycerol, and agar at four different NP concentrations 2%, 5%, 7%, and 10%. Our results show that at 2% concentration of copper in Fe3O4 NPs gave better results in all three mediums. However, they showed greater heat response and the highest SAR value in water than glycerol and agar. Further, at the lower concentration on NPs showed better thermal efficiency than higher concentrations.
Similar content being viewed by others
References
Luo, S., Wang, L., Ding, W., Wang, H., Zhou, J., Jin, H., Su, S., Ouyang, W.: Clinical trials of magnetic induction hyperthermia for treatment of tumours. OA Cancer. 2(2), (2014)
Torres-Lugo, M., Rinaldi, C.: Thermal potentiation of chemotherapy by magnetic nanoparticles. Nanomedicine. 8(10), 1689–1707 (2013)
Deatsch, A.E., Evans, B.A.: Heating efficiency in magnetic nanoparticle hyperthermia. J. Magn. Magn. Mater. 354, 163–172 (2014)
Dutz, S., Hergt, R.: Magnetic nanoparticle heating and heat transfer on a microscale: basic principles, realities and physical limitations of hyperthermia for tumour therapy. Int. J. Hyperth. 29(8), 790–800 (2013)
Fortin, J.P., Wilhelm, C., Servais, J., Ménager, C., Bacri, J.C., Gazeau, F.: Size-sorted anionic iron oxide nanomagnets as colloidal mediators for magnetic hyperthermia. J. Am. Chem. Soc. 129(9), 2628–2635 (2007)
Rosensweig, R.E.: Heating magnetic fluid with alternating magnetic field. J. Magn. Magn. Mater. 252, 370–374 (2002)
Guardia, P., Di Corato, R., Lartigue, L., Wilhelm, C., Espinosa, A., Garcia-Hernandez, M., Gazeau, F., Manna, L., Pellegrino, T.: Water-soluble iron oxide nanocubes with high values of specific absorption rate for cancer cell hyperthermia treatment. ACS Nano. 6(4), 3080–3091 (2012)
Khandhar, A.P., Ferguson, R.M., Krishnan, K.M.: Monodispersed magnetite nanoparticles optimized for magnetic fluid hyperthermia: Implications in biological systems. J. Appl. Phys. 109(7), 07B310 (2011)
Shaterabadi, Z., Nabiyouni, G., Soleymani, M.: High impact of in situ dextran coating on biocompatibility, stability and magnetic properties of iron oxide nanoparticles. Mater. Sci. Eng. C. 75, 947–956 (2017)
Johannsen, M., Gneveckow, U., Taymoorian, K., Thiesen, B., Waldöfner, N., Scholz, R., Jung, K., Jordan, A., Wust, P., Loening, S.: Morbidity and quality of life during thermotherapy using magnetic nanoparticles in locally recurrent prostate cancer: results of a prospective phase I trial. Int. J. Hyperth. 23(3), 315–323 (2007)
Maier-Hauff, K., Rothe, R., Scholz, R., Gneveckow, U., Wust, P., Thiesen, B., Feussner, A., von Deimling, A., Waldoefner, N., Felix, R.: Intracranial thermotherapy using magnetic nanoparticles combined with external beam radiotherapy: results of a feasibility study on patients with glioblastoma multiforme. J. Neurooncol. 81(1), 53–60 (2007)
Wust, P., Gneveckow, U., Johannsen, M., Böhmer, D., Henkel, T., Kahmann, F., Sehouli, J., Felix, R.: Magnetic nanoparticles for interstitial thermotherapy–feasibility, tolerance and achieved temperatures. Int. J. Hyperth. 22(8), 673–685 (2006)
Huang, H.S., Hainfeld, J.F.: Intravenous magnetic nanoparticle cancer hyperthermia. Int. J. Nanomed. 8, 2521 (2013)
Albarqi, H.A., Wong, L.H., Schumann, C., Sabei, F.Y., Korzun, T., Li, X., Hansen, M.N., Dhagat, P., Moses, A.S., Taratula, O.: Biocompatible nanoclusters with high heating efficiency for systemically delivered magnetic hyperthermia. ACS Nano. 13(6), 6383–6395 (2019)
Nguyen, K.L., Yoshida, T., Han, F., Ayad, I., Reemtsen, B.L., Salusky, I.B., Satou, G.M., Hu, P., Finn, J.P.: MRI with ferumoxytol: a single center experience of safety across the age spectrum. J. Magn. Reson. Imaging. 45(3), 804–812 (2017)
Xie, J., Yan, C., Yan, Y., Chen, L., Song, L., Zang, F., An, Y., Teng, G., Gu, N., Zhang, Y.: Multi-modal Mn–Zn ferrite nanocrystals for magnetically-induced cancer targeted hyperthermia: a comparison of passive and active targeting effects. Nanoscale. 8(38), 16902–16915 (2016)
Cho, M., Cervadoro, A., Ramirez, M.R., Stigliano, C., Brazdeikis, A., Colvin, V.L., Civera, P., Key, J., Decuzzi, P.: Assembly of iron oxide nanocubes for enhanced cancer hyperthermia and magnetic resonance imaging. Nanomaterials. 7(4), 72 (2017)
He, S., Zhang, H., Liu, Y., Sun, F., Yu, X., Li, X., Zhang, L., Wang, L., Mao, K., Wang, G.: Maximizing specific loss power for magnetic hyperthermia by hard–soft mixed ferrites. Small. 14(29), 1800135 (2018)
Noh, S.H., Na, W., Jang, J.T., Lee, J.H., Lee, E.J., Moon, S.H., Lim, Y., Shin, J.S., Cheon, J.: Nanoscale magnetism control via surface and exchange anisotropy for optimized ferrimagnetic hysteresis. Nano. Lett. 12(7), 3716–3721 (2012)
Hayashi, K., Nakamura, M., Sakamoto, W., Yogo, T., Miki, H., Ozaki, S., Abe, M., Matsumoto, T., Ishimura, K.: Superparamagnetic nanoparticle clusters for cancer theranostics combining magnetic resonance imaging and hyperthermia treatment. Theranostics. 3(6), 366 (2013)
Kombaiah, K., Vijaya, J.J., Kennedy, L.J., Bououdina, M., Al-Najar, B.: Conventional and microwave combustion synthesis of optomagnetic CuFe2O4 nanoparticles for hyperthermia studies. J. Phys. Chem. Solids. 115, 162–171 (2018)
Abdel-Hamid, Z., Rashad, M., Mahmoud, S.M., Kandil, A.: Electrochemical hydroxyapatite-cobalt ferrite nanocomposite coatings as well hyperthermia treatment of cancer. Mater. Sci. Eng. C. 76, 827–838 (2017)
Doaga, A., Cojocariu, A.M., Amin, W., Heib, F., Bender, P., Hempelmann, R., Caltun, O.F.: Synthesis and characterizations of manganese ferrites for hyperthermia applications. Mater. Chem. Phys. 143(1), 305–310 (2013). https://doi.org/10.1016/j.matchemphys.2013.08.066
Zargar, T., Kermanpur, A.: Effects of hydrothermal process parameters on the physical, magnetic and thermal properties of Zn0.3Fe2.7O4 nanoparticles for magnetic hyperthermia applications. Ceram. Int. 43(7), 5794–5804 (2017). https://doi.org/10.1016/j.ceramint.2017.01.127
El-Sayed, H.M., Ali, I.A., Azzam, A., Sattar, A.A.: Influence of the magnetic dead layer thickness of Mg-Zn ferrites nanoparticle on their magnetic properties. J. Magn. Magn. Mater. 424, 226–232 (2017). https://doi.org/10.1016/j.jmmm.2016.10.049
Sabale, S., Jadhav, V., Khot, V., Zhu, X., Xin, M., Chen, H.: Superparamagnetic MFe 2 O 4 (M= Ni Co, Zn, Mn) nanoparticles: synthesis, characterization, induction heating and cell viability studies for cancer hyperthermia applications. J. Mater. Sci. Mater. Med. 26(3), 127 (2015)
Sahoo, Y., Goodarzi, A., Swihart, M.T., Ohulchanskyy, T.Y., Kaur, N., Furlani, E.P., Prasad, P.N.: Aqueous ferrofluid of magnetite nanoparticles: fluorescence labeling and magnetophoretic control. J. Phys. Chem. B. 109(9), 3879–3885 (2005)
Barros, W.R.P., Steter, J.R., Lanza, M.R.V., Tavares, A.C.: Catalytic activity of Fe3−xCuxO4 (0≤x≤0.25) nanoparticles for the degradation of Amaranth food dye by heterogeneous electro-Fenton process. Appl. Catal. B. Environ. 180, 434–441 (2016). https://doi.org/10.1016/j.apcatb.2015.06.048
Huang, X., Xu, C., Ma, J., Chen, F.: Ionothermal synthesis of Cu-doped Fe3O4 magnetic nanoparticles with enhanced peroxidase-like activity for organic wastewater treatment. Adv. Powder Technol. 29(3), 796–803 (2018). https://doi.org/10.1016/j.apt.2017.12.025
Lassoued, A., Lassoued, M.S., Dkhil, B., Gadri, A., Ammar, S.: Structural, optical and morphological characterization of Cu-doped α-Fe2O3 nanoparticles synthesized through co-precipitation technique. J. Mol. Struct. 1148, 276–281 (2017)
Lee, A.P., Webb, J., Macey, D.J., van Bronswijk, W., Savarese, A.R., de Witt, G.C.: In situ Raman spectroscopic studies of the teeth of the chiton Acanthopleura hirtosa. J. Biol. Inorg. Chem. 3(6), 614–619 (1998)
Jubb, A.M., Allen, H.C.: Vibrational spectroscopic characterization of hematite, maghemite, and magnetite thin films produced by vapor deposition. ACS Appl. Mater. Interfaces. 2(10), 2804–2812 (2010)
Colomban, P., Cherifi, S., Despert, G.: Raman identification of corrosion products on automotive galvanized steel sheets. J. Raman. Spectrosc: An International Journal for Original Work in all Aspects of Raman Spectroscopy, Including Higher Order Processes, and also Brillouin and Rayleigh Scattering. 39(7), 881–886 (2008)
Liu, H., Li, P., Lu, B., Wei, Y., Sun, Y.: Transformation of ferrihydrite in the presence or absence of trace Fe (II): The effect of preparation procedures of ferrihydrite. J. Solid State Chem. 182(7), 1767–1771 (2009)
Jing, Z., Wu, S.: Synthesis and characterization of monodisperse hematite nanoparticles modified by surfactants via hydrothermal approach. Mater. Lett. 58(27), 3637–3640 (2004). https://doi.org/10.1016/j.matlet.2004.07.010
Darezereshki, E.: One-step synthesis of hematite (α-Fe2O3) nano-particles by direct thermal-decomposition of maghemite. Mater. Lett. 65(4), 642–645 (2011). https://doi.org/10.1016/j.matlet.2010.11.030
Emara, M., Goher, M., Abdo, M., El-Shamy, A., Mahmod, N.: Synthesis and characterization of Fe, Mn and superparamagnetic magnetite Fe3O4 nanoparticles. Int. J. Adv. Res. 4(9), 447–461 (2016). https://doi.org/10.21474/ijar01/1501
Tang, J., Myers, M., Bosnick, K.A., Brus, L.E.: Magnetite Fe3O4 nanocrystals: spectroscopic observation of aqueous oxidation kinetics. J. Phys. Chem. B 107(30), 7501–7506 (2003)
Liu, H., Zhu, L., Ma, H., Wen, J., Xu, H., Qiu, Y., Zhang, L., Li, L., Gu, C.: Copper (II)-coated Fe 3 O 4 nanoparticles as an efficient enzyme mimic for colorimetric detection of hydrogen peroxide. Microchim. Acta. 186(8), 518 (2019)
Mohanraj, K., Sivakumar, G.: Synthesis of γ-Fe 2 O 3, Fe 3 O 4 and copper doped Fe 3 O 4 nanoparticles by sonochemical method. Sains Malays. 46(10), 1935–1942 (2017)
Sadat, M., Patel, R., Sookoor, J., Bud’ko, S.L., Ewing, R.C., Zhang, J., Xu, H., Wang, Y., Pauletti, G.M., Mast, D.B.: Effect of spatial confinement on magnetic hyperthermia via dipolar interactions in Fe3O4 nanoparticles for biomedical applications. Mater. Sci. Eng. C. 42, 52–63 (2014)
Carrey, J., Mehdaoui, B., Respaud, M.: Simple models for dynamic hysteresis loop calculations of magnetic single-domain nanoparticles: application to magnetic hyperthermia optimization. J. Appl. Phys. 109(8), 083921 (2011)
Batoo, K.M., Salah, D., Kumar, G., Kumar, A., Singh, M., Abd El-Sadek, M., Mir, F.A., Imran, A., Jameel, D.A.: Hyperfine interaction and tuning of magnetic anisotropy of Cu doped CoFe2O4 ferrite nanoparticles. J. Magn. Magn. Mater. 411, 91–97 (2016)
Deng, H., Li, X., Peng, Q., Wang, X., Chen, J., Li, Y.: Monodisperse magnetic single-crystal ferrite microspheres. Angew. Chem. 117(18), 2842–2845 (2005)
Pereira, C., Pereira, A.M., Fernandes, C., Rocha, M., Mendes, R., Fernández-García, M.P., Guedes, A., Tavares, P.B., Grenèche, J.M., Araújo, J.O.P.: Superparamagnetic MFe2O4 (M= Fe, Co, Mn) nanoparticles: tuning the particle size and magnetic properties through a novel one-step coprecipitation route. Chem. Mater. 24(8), 1496–1504 (2012)
Sytnyk, M., Kirchschlager, R., Bodnarchuk, M.I., Primetzhofer, D., Kriegner, D., Enser, H., Stangl, J., Bauer, P., Voith, M., Hassel, A.W.: Tuning the magnetic properties of metal oxide nanocrystal heterostructures by cation exchange. Nano Lett. 13(2), 586–593 (2013)
Costa, A., Tortella, E., Morelli, M., Kiminami, R.: Synthesis, microstructure and magnetic properties of Ni–Zn ferrites. J. Magn. Magn. Mater. 256(1–3), 174–182 (2003)
Koops, C.: On the dispersion of resistivity and dielectric constant of some semiconductors at audiofrequencies. Phys. Rev. 83(1), 121 (1951)
Shirsath, S.E., Jadhav, S.S., Toksha, B., Patange, S., Jadhav, K.: Remarkable influence of Ce4+ ions on the electronic conduction of Ni1− 2xCexFe2O4. Scripta Mater. 64(8), 773–776 (2011)
Kolhatkar, A.G., Jamison, A.C., Litvinov, D., Willson, R.C., Lee, T.R.: Tuning the magnetic properties of nanoparticles. Int. J. Mol. Sci. 14(8), 15977–16009 (2013)
Lahiri, B., Muthukumaran, T., Philip, J.: Magnetic hyperthermia in phosphate coated iron oxide nanofluids. J. Magn. Magn. Mater. 407, 101–113 (2016)
Kandasamy, G., Maity, D.: Recent advances in superparamagnetic iron oxide nanoparticles (SPIONs) for in vitro and in vivo cancer nanotheranostics. Int. J. Pharm. 496(2), 191–218 (2015)
Wang, W., Tang, B., Ju, B., Zhang, S.: Size-controlled synthesis of water-dispersible superparamagnetic Fe 3 O 4 nanoclusters and their magnetic responsiveness. RSC Adv. 5(92), 75292–75299 (2015)
Piñeiro-Redondo, Y., Bañobre-López, M., Pardiñas-Blanco, I., Goya, G., López-Quintela, M.A., Rivas, J.: The influence of colloidal parameters on the specific power absorption of PAA-coated magnetite nanoparticles. Nanoscale Res. Lett. 6(1), 1–7 (2011)
Hugounenq, P., Levy, M., Alloyeau, D., Lartigue, L., Dubois, E., Cabuil, V.R., Ricolleau, C., Roux, S.P., Wilhelm, C., Gazeau, F.: Iron oxide monocrystalline nanoflowers for highly efficient magnetic hyperthermia. J. Phys. Chem. C. 116(29), 15702–15712 (2012)
Niculaes, D., Lak, A., Anyfantis, G.C., Marras, S., Laslett, O., Avugadda, S.K., Cassani, M., Serantes, D., Hovorka, O., Chantrell, R.: Asymmetric assembling of iron oxide nanocubes for improving magnetic hyperthermia performance. ACS Nano. 11(12), 12121–12133 (2017)
Chen, S., Chiang, C.-L., Hsieh, S.: Simulating physiological conditions to evaluate nanoparticles for magnetic fluid hyperthermia (MFH) therapy applications. J. Magn. Magn. Mater. 322(2), 247–252 (2010)
Shah, R.R., Davis, T.P., Glover, A.L., Nikles, D.E., Brazel, C.S.: Impact of magnetic field parameters and iron oxide nanoparticle properties on heat generation for use in magnetic hyperthermia. J. Magn. Magn. Mater. 387, 96–106 (2015)
Powell, W., Catranis, C., Maynard, C.: Design of self-processing antimicrobial peptides for plant protection. Lett. Appl. Microbiol. 31(2), 163–168 (2000)
Ishnava, K.B., Shah, P.P.: Anticariogenic and hemolytic activity of selected seed protein extracts in vitro conditions. J. Dent. (Tehran, Iran). 11(5), 576 (2014)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article is part of the special issue “Selected articles based on 4th International Conference on Materials Science & Nanotechnology”
Rights and permissions
About this article
Cite this article
Sultan, M.Z., Jamil, Y., Javed, Y. et al. Synthesis, Characterization, and Study of Thermal Response of Cu-Doped Fe3O4 Nanoparticles. J Supercond Nov Magn 34, 3209–3221 (2021). https://doi.org/10.1007/s10948-021-05990-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10948-021-05990-z