Abstract
Silica aerogel was often reinforced with glass fiber and changed to hydrophobicity via a surface modification to overcome its fragile and hygroscopic nature for practical application. However, though the mechanical and hydrophobic performances of the silica aerogel were improved, its unique ultra-low thermal conductivity was compromised. In order to prepare the hydrophobic silica aerogel felt while maintaining its excellent mechanical and insulation performances, the tetraethoxysilane and methyltrimethoxysilane (MTMS) as co-precursors, glass fiber as felt, and silica gel as a filling agent were selected to make the felt. An approach of the two-step sol–gel process followed by supercritical CO2 drying was applied. The morphology, structure, and properties of the felt were analyzed by field emission scanning electron microscope, a Fourier transform infrared spectrometer, and a thermal constants analyzer, etc. It was found that the felt showed excellent mechanical, thermally insulating, and hydrophobic performance. Also, it maintained low density and had higher thermal stability, due to the addition of silica gel and MTMS in the felt. The former enhanced the combination of silica aerogel with glass fiber and improved the microstructure of the felt. The latter endowed the felt excellent hydrophobicity, flexibility, and thermal stability.
Similar content being viewed by others
References
F. Shi, L. Wang, J. Liu, Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process. Mater. Lett. 60, 3718–3722 (2006)
P.C. Thapliyal, K. Singh, Aerogels as promising thermal insulating materials: an overview. J. Mater. (2014). https://doi.org/10.1155/2014/127049
X. Li, Q. Wang, H. Li, H. Ji, X. Sun, J. He, Effect of sepiolite fiber on the structure and properties of the sepiolite/silica aerogel composite. J. Sol-Gel. Sci. Technol. 67, 646–653 (2013)
D. Shi, Y. Sun, J. Feng, X. Yang, S. Han, C. Mi, Y. Jiang, H. Qi, Experimental investigation on high temperature anisotropic compression properties of ceramic-fiber-reinforced SiO2 aerogel. Mater. Sci. Eng. A 585, 25–31 (2013)
X. Yang, Y. Sun, D. Shi, J. Liu, Experimental investigation on mechanical properties of a fiber-reinforced silica aerogel composite. Mater. Sci. Eng. A 528, 4830–4836 (2011)
B. Yuan, S. Ding, D. Wang, G. Wang, H. Li, Heat insulation properties of silica aerogel/glass fiber composites fabricated by press forming. Mater. Lett. 75, 204–206 (2012)
Y. Liao, H. Wu, Y. Ding, S. Yin, M. Wang, A. Cao, Engineering thermal and mechanical properties of flexible fiber-reinforced aerogel composites. J. Sol-Gel. Sci. Technol. 63, 445–456 (2012)
C.-Y. Kim, J.-K. Lee, B.-I. Kim, Synthesis and pore analysis of aerogel–glass fiber composites by ambient drying method. Colloids Surf. A 313, 179–182 (2008)
X. Gui, A. Cao, J. Wei, H. Li, Y. Jia, Z. Li, L. Fan, K. Wang, H. Zhu, D. Wu, Soft, highly conductive nanotube sponges and composites with controlled compressibility. ACS Nano 4, 2320–2326 (2010)
G. Wu, Y. Yu, X. Cheng, Y. Zhang, Preparation and surface modification mechanism of silica aerogels via ambient pressure drying. Mater. Chem. Phys. 129, 308–314 (2011)
Y. Duan, S.C. Jana, B. Lama, M.P. Espe, Hydrophobic silica aerogels by silylation. J. Non-Cryst. Solids 437, 26–33 (2016)
M. Li, H. Jiang, D. Xu, O. Hai, W. Zheng, Low density and hydrophobic silica aerogels dried under ambient pressure using a new co-precursor method. J. Non-Cryst. Solids 452, 187–193 (2016)
Z. Li, X. Cheng, L. Gong, Q. Liu, S. Li, Enhanced flame retardancy of hydrophobic silica aerogels by using sodium silicate as precursor and phosphoric acid as catalyst. J. Non-Cryst. Solids 481, 267–275 (2018)
U. Pyell, G. Stork, Preparation and properties of an 8-hydroxyquinoline silica gel, synthesized via mannich reaction. Fresenius’ J. Anal. Chem. 342, 281–286 (1992)
S. Shafi, R. Navik, X. Ding, Y. Zhao, Improved heat insulation and mechanical properties of silica aerogel/glass fiber composite by impregnating silica gel. J. Non-Cryst. Solids 503, 78–83 (2019)
M. Cai, S. Shafi, Y. Zhao, Preparation of compressible silica aerogel reinforced by bacterial cellulose using tetraethylorthosilicate and methyltrimethoxylsilane co-precursor. J. Non-Cryst. Solids 481, 622–626 (2018)
Z. Li, X. Cheng, S. He, D. Huang, H. Bi, H. Yang, Preparation of ambient pressure dried MTMS/TEOS co-precursor silica aerogel by adjusting NH4OH concentration. Mater. Lett. 129, 12–15 (2014)
Z. Li, X. Cheng, S. He, X. Shi, L. Gong, H. Zhang, Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance. Compos. A 84, 316–325 (2016)
A.V. Rao, D. Haranath, Effect of methyltrimethoxysilane as a synthesis component on the hydrophobicity and some physical properties of silica aerogels. Microporous Mesoporous Mater. 30, 267–273 (1999)
T. Zhou, X. Cheng, Y. Pan, C. Li, L. Gong, H. Zhang, Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying. Appl. Surf. Sci. 437, 321–328 (2018)
X. Wang, N.G. Akhmedov, Y. Duan, D. Luebke, B. Li, Immobilization of amino acid ionic liquids into nanoporous microspheres as robust sorbents for CO2 capture. J. Mater. Chem. A 1, 2978–2982 (2013)
Y. Si, T. Ren, B. Ding, J. Yu, G. Sun, Synthesis of mesoporous magnetic Fe3O4@ carbon nanofibers utilizing in situ polymerized polybenzoxazine for water purification. J. Mater. Chem. 22, 4619–4622 (2012)
K.H. Kim, Y. Oh, M.F. Islam, Mechanical and thermal management characteristics of ultrahigh surface area single-walled carbon nanotube aerogels. Adv. Func. Mater. 23, 377–383 (2013)
A.V. Rao, M.M. Kulkarni, D. Amalnerkar, T. Seth, Surface chemical modification of silica aerogels using various alkyl-alkoxy/chloro silanes. Appl. Surf. Sci. 206, 262–270 (2003)
S.A. Mahadik, F. Pedraza, V. Parale, H.-H. Park, Organically modified silica aerogel with different functional silylating agents and effect on their physico-chemical properties. J. Non-Cryst. Solids 453, 164–171 (2016)
S. Zong, W. Wei, Z. Jiang, Z. Yan, J. Zhu, J. Xie, Characterization and comparison of uniform hydrophilic/hydrophobic transparent silica aerogel beads: skeleton strength and surface modification. RSC Adv. 5, 55579–55587 (2015)
D.Y. Nadargi, S.S. Latthe, H. Hirashima, A.V. Rao, Studies on rheological properties of methyltriethoxysilane (MTES) based flexible superhydrophobic silica aerogels. Microporous Mesoporous Mater. 117, 617–626 (2009)
C. Li, X. Cheng, Z. Li, Y. Pan, Y. Huang, L. Gong, Mechanical, thermal and flammability properties of glass fiber film/silica aerogel composites. J. Non-Cryst. Solids 457, 52–59 (2017)
S. Yun, H. Luo, Y. Gao, Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity. J. Mater. Chem. A 2, 14542–14549 (2014)
A. Tadjarodi, M. Haghverdi, V. Mohammadi, Preparation and characterization of nano-porous silica aerogel from rice husk ash by drying at atmospheric pressure. Mater. Res. Bull. 47, 2584–2589 (2012)
A.V. Rao, R.R. Kalesh, D. Amalnerkar, T. Seth, Synthesis and characterization of hydrophobic TMES/TEOS based silica aerogels. J. Porous Mater. 10, 23–29 (2003)
C. Lei, Z. Hu, Y. Zhang, H. Yang, J. Li, S. Hu, Tailoring structural and physical properties of polymethylsilsesquioxane aerogels by adjusting NH3· H2O concentration. Microporous Mesoporous Mater. 258, 236–243 (2018)
Acknowledgments
We are grateful to the Instrumental Analysis Center of School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University for SEM, TGA, and FTIR and DSA and also appreciate Materials Testing and Analysis Center, Shanghai Jiao Tong University for the Compression test analysis.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shafi, S., Zhao, Y. Superhydrophobic, enhanced strength and thermal insulation silica aerogel/glass fiber felt based on methyltrimethoxysilane precursor and silica gel impregnation. J Porous Mater 27, 495–502 (2020). https://doi.org/10.1007/s10934-019-00834-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-019-00834-7