Abstract
As the request for ready-made food grows, it’s more important than ever to develop effective antimicrobial food packaging materials to assure food’s microbiological safety. The solvent casting method was used to create a chitosan (Cs)/polyvinyl alcohol (PVA) blend based active food packaging material enhanced with Fe2O3/TiO2 (FeTiO2) nanoparticles. The prepared films were characterized by TEM, XRD, FTIR, and ac conductivity. The structural alterations occurring in the nanocomposites are indicated by FTIR spectra and XRD investigations. The AC conductivity and dielectric characteristics of nanocomposites were dramatically improved as the nanoparticle loading was raised. The mechanical properties of blend/FeTiO2 nanocomposites films were better than pure blend film. The nanocomposites films had good antibacterial activity and mechanical properties, suggesting that they could be a viable alternative to non-biodegradable packaging material.
Similar content being viewed by others
References
Tommalieh M et al (2021) Characterization and electrical enhancement of PVP/PVA matrix doped by gold nanoparticles prepared by laser ablation. Radiat Phys Chem 179:109195
Hilmi AR, Fauziyah NA, Pratapa S (2019) A temperature-dependent storage modulus model for filler-dispersed PEG/silica composites. Compos B Eng 173:106868
Asnag G, Oraby A, Abdelghany A (2019) Effect of gamma-irradiation on the structural, optical and electrical properties of PEO/starch blend containing different concentrations of gold nanoparticles. Radiat Eff Defect Sol 174:579–584
Martinez B et al (1998) Low temperature surface spin-glass transition in γ-Fe 2 O 3 nanoparticles. Phys Rev Lett 80(1):181
Abdelghany A, Oraby A, Asnag G (2019) Structural, thermal and electrical studies of polyethylene oxide/starch blend containing green synthesized gold nanoparticles. J Mol Struct 1180:15–25
Alsulami QA, Rajeh A (2021) Synthesis of the SWCNTs/TiO2 nanostructure and its effect study on the thermal, optical, and conductivity properties of the CMC/PEO blend. Result Phys 28:104675
Ahmed M et al (2020) Composition and design of nanofibrous scaffolds of Mg/Se-hydroxyapatite/graphene oxide@ ε-polycaprolactone for wound healing applications. J Market Res 9(4):7472–7485
Mello RS et al (2006) Preparation of chitosan membranes for filtration and concentration of compounds under high pressure process. Polym Bull 56(4):447–454
Hamedi H et al (2018) Chitosan based hydrogels and their applications for drug delivery in wound dressings: a review. Carbohyd Polym 199:445–460
Halász K, Csóka L (2018) Black chokeberry (Aronia melanocarpa) pomace extract immobilized in chitosan for colorimetric pH indicator film application. Food Packag Shelf Life 16:185–193
Meng, X., et al (2009) Study on the blending solution behavior and membrane properties of sodium alginate and chitosan. in 2009 3rd International Conference on Bioinformatics and Biomedical Engineering. IEEE
Liang S et al (2009) Preparation of single or double-network chitosan/poly (vinyl alcohol) gel films through selectively cross-linking method. Carbohyd Polym 77(4):718–724
Lu Z et al (2017) Enhanced antibacterial and wound healing activities of microporous chitosan-Ag/ZnO composite dressing. Carbohyd Polym 156:460–469
Abutalib MM, Rajeh A (2020) Structural, thermal, optical and conductivity studies of Co/ZnO nanoparticles doped CMC polymer for solid state battery applications. Polym Testing 91:106803
Abutalib MM, Rajeh A (2022) Boosting optical and electrical characteristics of polyvinyl alcohol/carboxymethyl cellulose nanocomposites by GNPs/MWCNTs fillers as an application in energy storage devices. Int J Energy Res 46(5):6216–6224
Hassan SM, Ahmed AI, Mannaa MA (2018) Structural, photocatalytic, biological and catalytic properties of SnO2/TiO2 nanoparticles. Ceram Int 44(6):6201–6211
Hezma A, Rajeh A, Mannaa MA (2019) An insight into the effect of zinc oxide nanoparticles on the structural, thermal, mechanical properties and antimicrobial activity of Cs/PVA composite. Coll Surf A 581:123821
Hassan SM, Ahmed AI, Mannaa MA (2019) Surface acidity, catalytic and photocatalytic activities of new type H3PW12O40/Sn-TiO2 nanoparticles. Coll Surf A 577:147–157
Puchana-Rosero M et al (2016) Microwave-assisted activated carbon obtained from the sludge of tannery-treatment effluent plant for removal of leather dyes. Coll Surf A 504:105–115
Abutalib MM, Rajeh A (2021) Enhanced structural, electrical, mechanical properties and antibacterial activity of Cs/PEO doped mixed nanoparticles (Ag/TiO2) for food packaging applications. Polym Testing 93:107013
Sathiya S et al (2016) Interaction of chitosan/zinc oxide nanocomposites and their antibacterial activities with Escherichia coli. Mater Today: Proc 3(10):3855–3860
Hassan SM, Ahmed AI, Mannaa MA (2019) Preparation and characterization of SnO2 doped TiO2 nanoparticles: effect of phase changes on the photocatalytic and catalytic activity. J Sci Adv Mater Device 4(3):400–412
Farea M et al (2020) Effect of cesium bromide on the structural, optical, thermal and electrical properties of polyvinyl alcohol and polyethylene oxide. J Market Res 9(2):1530–1538
Ragab H, Rajeh A (2020) Structural, thermal, optical and conductive properties of PAM/PVA polymer composite doped with Ag nanoparticles for electrochemical application. J Mater Sci: Mater Electron 31(19):16780–16792
Radja I et al (2015) Characterization and electrochemical properties of conducting nanocomposites synthesized from p-anisidine and aniline with titanium carbide by chemical oxidative method. Synth Met 202:25–32
Abutalib MM, Rajeh A (2020) Influence of MWCNTs/Li-doped TiO2 nanoparticles on the structural, thermal, electrical and mechanical properties of poly (ethylene oxide)/poly (methylmethacrylate) composite. J Organomet Chem 918:121309
Abdel-Wareth MT et al (2019) Biological activities of endozoic fungi isolated from Biomphalaria alexandrina snails maintained in different environmental conditions. Int J Environ Stud 76(5):780–799
Abutalib M (2019) Effect of zinc oxide nanorods on the structural, thermal, dielectric and electrical properties of polyvinyl alcohol/carboxymethyle cellulose composites. Physica B 557:108–116
Hebbar V, Bhajantri R, Naik J (2017) Physico-chemical properties of Bismuth nitrate filled PVA–LiClO 4 polymer composites for energy storage applications. J Mater Sci: Mater Electron 28(8):5827–5839
Abdelrazek E et al (2016) Effect of an encapsulate carbon nanotubes (CNTs) on structural and electrical properties of PU/PVC nanocomposites. Physica B 502:48–55
Abdeen ZI, El Farargy AF, Negm NA (2018) Nanocomposite framework of chitosan/polyvinyl alcohol/ZnO: preparation, characterization, swelling and antimicrobial evaluation. J Mol Liq 250:335–343
Shafei AE, Abou-Okeil A (2011) ZnO/carboxymethyl chitosan bionano-composite to impart antibacterial and UV protection for cotton fabric. Carbohyd Polym 83(2):920–925
Algethami N et al (2022) Characterization, optical, and electrical properties of chitosan/polyacrylamide blend doped silver nanoparticles. J Mater Sci: Mater Electron 539:55–96
Morsi M et al (2021) Nd: YAG nanosecond laser induced growth of Au nanoparticles within CMC/PVA matrix: Multifunctional nanocomposites with tunable optical and electrical properties. Compos Commun 24:100662
Abdelghany A, Oraby A, Farea M (2019) Influence of green synthesized gold nanoparticles on the structural, optical, electrical and dielectric properties of (PVP/SA) blend. Physica B 560:162–173
Alghamdi HM, Rajeh A (2021) Synthesis of carbon nanotubes/titanium dioxide and study of its effect on the optical, dielectric, and mechanical properties of polyvinyl alcohol/sodium alginate for energy storage devices. Int J Energy Res. https://doi.org/10.1002/er.7578
Gami F et al (2022) Structural, optical and electrical studies of chitosan/polyacrylamide blend filled with synthesized selenium nanoparticles. J Mol Struct 1257:132631
Senthil Muthu Kumar T et al (2021) Influence of titanium dioxide particles on the filtration of 1, 4-dioxane and antibacterial properties of electrospun cellulose acetate and polyvinylidene fluoride nanofibrous membranes. J Poly Environ 29(3):775–784
Ahmadizadegan H (2016) Synthesis and gas transport properties of novel functional polyimide/ZnO nanocomposite thin film membranes. RSC Adv 6(108):106778–106789
Mukurumbira AR, Mellem JJ, Amonsou EO (2017) Effects of amadumbe starch nanocrystals on the physicochemical properties of starch biocomposite films. Carbohyd Polym 165:142–148
Abutalib M, Rajeh A (2020) Preparation and characterization of polyaniline/sodium alginate-doped TiO2 nanoparticles with promising mechanical and electrical properties and antimicrobial activity for food packaging applications. J Mater Sci: Mater Electron 31(12):9430–9442
Hezma A et al (2017) Enhancement of the thermal and mechanical properties of polyurethane/polyvinyl chloride blend by loading single walled carbon nanotubes. Prog Nat Sci: Mater Int 27(3):338–343
Mathew S, Mathew J, Radhakrishnan E (2019) Polyvinyl alcohol/silver nanocomposite films fabricated under the influence of solar radiation as effective antimicrobial food packaging material. J Polym Res 26(9):1–10
Acknowledgements
This work was funded by the University of Jeddah, Jeddah, Saudi Arabia, under grant No. (UJ-21-ICI-12). The authors, therefore, acknowledge with thanks the University of Jeddah technical and financial support.
Funding
This work was funded by the University of Jeddah, Jeddah, Saudi Arabia, under grant No. (UJ-21-ICI-12).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have not disclosed any competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Alghamdi, H.M., Abutalib, M.M., Rajeh, A. et al. Effect of the Fe2O3/TiO2 Nanoparticles on the Structural, Mechanical, Electrical Properties and Antibacterial Activity of the Biodegradable Chitosan/Polyvinyl Alcohol Blend for Food Packaging. J Polym Environ 30, 3865–3874 (2022). https://doi.org/10.1007/s10924-022-02478-2
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-022-02478-2