Abstract
Natural cellulosic fibers are one of the smartest materials for use as reinforcement in polymers possessing a number of applications. Keeping in mind the immense advantages of the natural fibers, in present work synthesis of natural cellulosic fibers reinforced polymer composites through compression molding technique have been reported. Scanning Electron microscopy (SEM), Thermo gravimetric/Differential thermal/Derivative Thermogravimetry (TGA/DTA/DTG), absorption in different solvents, moisture absorbance, water uptake and chemical resistance measurements were used as characterization techniques for evaluating the different behaviour of cellulosic natural fibers reinforced polymer composites. Effect of fiber loading on mechanical properties like tensile strength, flexural strength, compressive strength and wear resistances has also been determined. Reinforcing of the polymer matrix with natural fibers was done in the form of short fiber. Present work indicates that green composites can be successfully fabricated with useful mechanical properties. These composites may be used in secondary structural applications in automotive, housing etc.
Similar content being viewed by others
References
Mehdi T, Akio T (2010) J Polym Environ 18:500
Yussuf AA, Massoumi I, Hassan A (2010) J Polym Environ 18:422
Chin-San W (2011) J Polym Environ 18:422
Nishino T, Arimoto N (2007) Biomacromolecules 8:2712
Gupta AP, Kumar V, Sharma M (2010) J Polym Environ 18:484
Thakur VK, Singha AS, Kaur I, Nagarajarao RP, Liping Y (2010) Int J Polym Anal Charact 15:397
Gupta AP, Sharma M (2010) J Polym Environ 18:492
Singha AS, Thakur VK (2008) Iran Polym J 17:541
Singha AS, Thakur VK (2009) Bull Mater Sci 32:49
Singha AS, Thakur VK (2009) J Polym Mater 26:81
Sreekumar J, Mohini S (2011) J Polym Environ 19:615
Singha AS, Thakur VK (2010) J Reinf Plast Compos 29:700
Singha AS, Thakur VK (2009) Polym Polym Compos 17:127
Singha AS, Thakur VK (2009) EJ Chem 5:1055
Singha AS, Thakur VK (2009) BioResources 4:292
Singha AS, Thakur VK (2009) Int J Polym Mater 58:217
Yoichi H, Yutaka T (2010) J Polym Environ 18:116
Yoichi H, Yutaka T (2010) J Polym Environ 18:326
Singha AS, Thakur VK (2009) Polym Plast Technol Eng 48:736
Nita T, Aurica PC (2011) J Polym Environ 19:546
Singha AS, Thakur VK (2010) Polym Compos 31:459
Singha AS, Thakur VK (2010) Int J Polym Anal Charact 15:87
Ghoshal S, Khan MA, Khan RA, Gul-E-Noor F, Chowdhury AMS (2010) J Polym Environ 18:216
Carvalho ES, Sanchez RJ, Tavares MIB, Lamonica AC (2010) J Polym Environ 18:661
Singha AS, Thakur VK (2009) Int J Polym Anal Charact 14:301
Thakur VK, Singha AS, Misra BN (2011) J Appl Polym Sci 122:532
Singha AS, Shama A, Thakur VK (2008) Int J Polym Anal Charact 13:447
Singha AS, Shama A, Thakur VK (2009) e-Polymers 105:1
Sapna P, Anuj K (2011) J Polym Environ 19:230
Alireza A, Yahya H, Fatemeh A (2011) J Polym Environ 19:297
Singha AS, Thakur VK (2009) Int J Polym Anal Charact 14:271
Singha AS, Thakur VK (2009) Polym Plast Technol Eng 48:201
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Thakur, V.K., Singha, A.S. & Thakur, M.K. Biopolymers Based Green Composites: Mechanical, Thermal and Physico-chemical Characterization. J Polym Environ 20, 412–421 (2012). https://doi.org/10.1007/s10924-011-0389-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-011-0389-y