1 Correction to: Journal of Nondestructive Evaluation (2020) 39:75 https://doi.org/10.1007/s10921-020-00721-1

The article “On the Use of X-ray Computed Tomography in Assessment of 3D-Printed Components”, written by Mohammad Reza Khosravani and Tamara Reinicke, was originally published electronically on the publisher’s internet portal on 28 September 2020 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on 20 July 2021 to ©The Author(s) 2021 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0.