Abstract
A procedure is proposed for calculating the loads acting on double sheet blade of impeller of the mine axial fan. It is established that torque of aerodynamic forces of blade creates an alternating load on slewing gear of the blades, and the main load of the gear is the frictional torque of rolling at the blade attachment point under the action of centrifugal forces.
Similar content being viewed by others
REFERENCES
I. V. Brusilovskii, Aerodynamic Calculation of Axial Fans [in Russian], Mashinostroenie, Moscow (1986).
I. V. Klepakov and V. A. Rudenko, “Development of new mine axial fans for main ventilation,” in: Theoretical and Operational Problems of Mine Stationary Installations [in Russian], VNIIGM after M. M. Fedorov, Donetsk (1986).
I. V. Brusilovskii, Aerodynamics of Axial Fans [in Russian], Mashinostroenie, Moscow (1984).
N. N. Petrov, N. A. Popov, and N. N. Andreev, “Calculation and design of controllable in operation axial fans,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 3 (1991).
Yu. B. Baksht, E. G. Lofenfel’d, and A. A. Rusetskii, Controllable Lead Screw Propellers [in Russian], Sudpromgiz, Leningrad (1961).
S. M. Belotserkovskii, Fine Plane in Subsonic Gas Flow [in Russian], Nauka, Moscow (1965).
S. M. Belotserkovskii and M. I. Nisht, Separated and Nonseparated Perfect-Liquid Streamline of Wings [in Russian], Nauka, Moscow (1978).
N. N. Petrov, N. A. Popov, E. A. Batyaev, and V. A. Novikov, “Theory and design of reversible axial fans with turn in motion blades of impeller,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 5 (1999).
V. A. Yudin and O. V. Chernyshova, “Streamline of double grid of profiles,” Din. Splosh. Sredy, No. 106 (1993).
P. S. Melkozerov, Energy Calculation of Automated Control Systems and Servo Drives [in Russian], Energia, Moscow (1968).
L. Ya. Perel’ and A. A. Filatov, Rolling Bearings. Handbook [in Russian], Mashinostroenie, Moscow (1992).
Catalog of Certificates of Actuators Produced by the “Zavod Elektroniki Mekhaniki” Prompribor Industrial Association [in Russian], Cheboksary (1996).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 4, pp. 46–52, July–August, 2004.
Rights and permissions
About this article
Cite this article
Popov, N.A., Petrov, N.N. Calculation of loads on slewing gears of turn in motion blades of axial fan impeller. J Min Sci 40, 360–366 (2004). https://doi.org/10.1007/s10913-004-0018-4
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10913-004-0018-4