Abstract
The main function of the gearless transmission system is to transmit power between two shafts through the sliding links that develop revolute pair between the hubs of two shaft. Normally the output link is bent at any angle between 0 and 180°. Moreover, as the hub in the driving shaft rotates, holes in this hub rotate, which in turn pushes the links and it drive the output. Moreover, torque developed in the small wind turbine is small so it is effectively used in this low torque applications. The objective of this project is to analysis gearless drive that is being simple and transmitting power preciously at almost right angle without any bevel gears. This mechanism is completely analysis using Ansys© software to lookout the elbow rod the hub under different working condition. Numerical analysis is made by rotating the mechanism at different rpm, viz. 0–150 rpm. Reaction forces and reaction moment are analyzed for 5 s simulation and compared with allowable stress. In this investigation, the effect of number of links and size of link is studied to find the permissible operating speed of mechanism. The major outcome of this work is to get the permissible limit of the stress, strain, speed, torque transmitting capacity of this mechanism as it is very much attracting the research community in replacing the conventional bevel gears. It is observed that the optimum number of link for better transmission is 8 and its diameter is 8 mm, and optimum speed of the mechanism is 100 rpm, so this mechanism is suitable for the small wind turbine.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chung DW, Ryu HM, Lee YM, Kang LW, Sul SK, Kang SJ, Song JH, Yoon JS, Lee KH, Suh JH (2001) Drive systems for high-speed gearless elevators. IEEE Ind Appl Soc 7(5):52–56
Jagushte GS, Mayur L, Rahul H, Prasad P, Tejas S (2017) Design and automation of bar cutting machine. Int J Eng Sci Res Tech 3(2):658–661
Mahantesh T, Yapalaparvi SB, Inamdar DN, Chiniwalar GV (2014) Gearless power transmission offset parallel shaft coupling. Int J Res Eng Technol 3(3):52–56
Janakiraman R, Paramasivam S (2012) Model and design analysis of gearless PM stator-less contra-rotation wind power generator. Int J Eng Res Technol 1(4):1–8
Bohra D, Bhaskar MK, Jain D, Manoj C, Vishvendra PG (2018) Performance analysis of permanent magnet synchronous generator wind turbine for variable wind velocity. Int J Res Appl Sci Eng Technol 6(1):2050–2059
Ghagare SD, Abhijeet SS, Anant DA, Abhijit MZ, Hanmant MK, Vahid MJ (2017) Hybrid power generation using Maglev turbine. Int J Recent Res Asp 4(4):409–412
Danish SM, Moinoddin M, Nawazish SM (2015) Investigations on the fluid coupling of gearless two wheeler. Int J Sci Eng Appl Sci 1(7):220–234
Kumar A, P P, R Sagar, Bist S (2015) Multi-angular gearless drive. Int J Sci Eng Res 6(7):974–977
Gupta S, Sheikh AG, Adnan ZB, Pawan A, Kushal K, Mohsin AW (2018) Design and analysis of gearless power transmission by rods using software simulation. Int J Innov Res Sci Eng Technol 7(5):5215–5218
Somraj R, Sailesh B (2017) Design and fabrication of gearless power transmission for skew shafts. Int Res J Eng Technol 4(4):1018–1023
Jagushte GS, Hrishikesh K, Vikas P, Vishal V (2016) Design, analysis and fabrication of gearless transmission by elbow mechanism. Int J Sci Res Dev 4(2):688–689
Kiran S, Yadav SPS, Sandeep GM, Naik R (2017) Design, analysis and fabrication of gearless power transmission by using elbow mechanism. Int J Eng Res Technol 6(4):739–741
Yasarkhan RS, Pankil P, Hiren P, Patel D (2017) A review paper on design and analysis of gearless transmission mechanism using elbow mechanism. Int J Adv Mech Eng 7(1):31–40
Acknowledgements
This research work is supported, in part by the Ministry of New and Renewable Energy, Government of India, New Delhi, India, vide Grant No. 24/6/2014-SWES(R&D) dated: 30/12/2014, and the authors also gratefully acknowledge the support of Dr. Rajesh Katyal, Mr, Haribhaskaran, Mr. David Solomon and Ms. Deepa Kurup. The authors are also grateful to Dr. Uppu Ramachandraiah, HoD (EIE), HITS, for providing valuable suggestions.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Premkumar, M.T., Hariram, V., Seralathan, S., Kumar, P., John, G. (2021). Design and Numerical Analysis of Gearless Transmission Used in Small Wind Turbine. In: Akinlabi, E., Ramkumar, P., Selvaraj, M. (eds) Trends in Mechanical and Biomedical Design. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4488-0_44
Download citation
DOI: https://doi.org/10.1007/978-981-15-4488-0_44
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4487-3
Online ISBN: 978-981-15-4488-0
eBook Packages: EngineeringEngineering (R0)