Abstract
The high sensitivity requirements set by future cosmic microwave background instruments are pushing the current technologies to produce highly performant focal plane arrays with thousands of detectors. The coupling of the detectors to the telescope optics is a challenging task. Current implemented solutions include phased-array antenna-coupled detectors, platelet horn arrays, and lenslet-coupled planar antennas. There are also recent developments of flat graded-index lenses based on etched silicon. However, there are strong requirements in terms of electromagnetic performance, such as coupling efficiency and bandwidth, as well as requirements in terms of easy manufacturing and scalability, and it is very challenging to meet all these requirements with one of the above solutions. Here, we present a novel approach for producing flat metal-mesh lenslet arrays based on devices previously realized using the mesh-filter technology. We have now adapted the polypropylene-based mesh lens design to silicon substrates, thus providing a good mechanical match to the silicon-based detector arrays. The measured performance of prototype pixels operating at millimeter wavelengths is presented.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
It is now clear that future cosmic microwave background (CMB) experiments, both ground and space based, will need broad spectral coverage to reach an all new level of sensitivity and systematics control in order to detect any potential inflationary signal and to enter a precision measurement era for B-mode signals.
Space-based (sub-)millimeter and far-IR experiments have provided paradigm shifting results in astrophysics. For example, in the study of star formation, herschel showed that protostellar cores form within molecular filaments [1] and planck is giving us the first real look at the scale and scope of dust polarization in our galaxy [2]. These observatories, together with sub-orbital and ground-based experiments, have also contributed to a wide range of astrophysical fields of study, including star-formation history and high-redshift galaxies (e.g., [3]), the role of magnetic field in star formation (e.g., [4]), galaxy cluster dynamics and cataloguing via the thermal Sunyaev–Zel’dovich (SZ) effect (e.g., [5]), bulk flow and cluster dynamics via the kinetic SZ effect [6,7,8], tests of patchy reionization through the kinetic SZ effect [9], and even the relatively unexplored discovery space for transient millimeter and far-IR sources (e.g., [10,11,12]). Space-borne experiments have traditionally produced some of the richest and most unique data sets in these research areas due to their access to wavelengths that are inaccessible from the ground and their ability to produce unbiased all-sky maps at the largest angular scales. Future discoveries in the far-IR and millimeter will undoubtedly leverage future space missions and the new technologies that enable them.
The planar, metamaterial optical coupling technologies being developed and reported here may directly enable the large, compact, and robust detector arrays required for future astrophysical experiments. This includes potential applicability to many far-IR projects currently in development or consideration, such as the long-wavelength components of the Origins Space Telescope (OST; formerly Far-IR Surveyor) [13], the Galactic Evolution Probe (GEP) [14], and the potential sub-orbital experiment BFORE [15].
2 Lenslet Array Current Technologies
To meet the challenge of efficiently coupling telescope optics to CMB detectors, a variety of technologies have been developed. These have been driven by requirements for beams that are Gaussian with low side lobes, low cross-polarization, and low cross-talk. Additional requirements include sufficient bandwidths, scalability, and easy manufacturing. Three currently competitive technologies are phased-array antenna-coupled detectors, platelet feedhorn arrays, and lens-coupled antennas (Fig. 1).
Planar phased arrays offer an elegant solution where the beams are synthesized by coherently emitting slot antennas [16, 17]. The antennas, the filters, and the detectors are all fabricated with the same photolithographic processes. Ratio of main lobe to side lobe amplitude can be adjusted by designing how sub-arrays are illuminated. Both uniform illumination that results in high side lobe and Gaussian illumination for Gaussian beam have been demonstrated. So far, a single frequency version of the technology has deployed successfully in multiple CMB experiments. A multichroic version of the technology is in development.
Feedhorn technology has been used by many CMB experiments over decades. Silicon platelet feedhorns have been developed using photolithography. Circular apertures are etched in silicon wafers which are then stacked together and eventually copper- and gold-plated. Corrugated feedhorns have achieved bandwidths of 2.3:1 [18, 19]. Spline-profiled smooth-wall feedhorns, used in several current and upcoming ground-based experiments [20, 21], are easier to fabricate and offer increased filling factor of the focal plane.
Lens-coupled antenna architecture has been used in millimeter and sub-millimeter applications such as POLARBEAR, SPT-3G, and DESHIMA [22]. Hyper-hemispherical, elliptical, or synthesized elliptical lenses are placed on the top of planar antennas to increase their forward gain and their optical coupling efficiency to the telescope. For millimeter and sub-millimeter wave applications, high dielectric constant and low loss materials, such as silicon and alumina, have been used as lens materials. Matching layers (also known as anti-reflection coatings) are often applied to minimize reflection at vacuum–dielectric interface. Planar antennas, such as double slot dipole, sinuous, and leaky antenna have been used.
The lens-coupled antenna architecture has several desirable properties. The observation frequency bandwidth of a lens-coupled detector can be designed to be wider than other optical coupling technologies, and it is limited by either the antenna’s or the anti-reflection coating’s bandwidth. Recent CMB experiments have implemented broadband lens-coupled antenna detectors by developing broadband planar antenna and broadband anti-reflection coating techniques. The ability to couple to a planar antenna allows microfabrication techniques to produce antenna and sensors on a silicon wafer. A lens array can be fabricated separately from the wafer holding the sensors. The two can be aligned and mated together to form an optically active detector.
Multiple methods have been used to fabricate lens arrays with matching layers. Deployed CMB experiments, such as POLARBEAR and SPT-3G, used dielectric hemispheres placed in pockets that are micromachined into silicon wafer with DRIE techniques.
Both millimeter and sub-millimeter experiments explored machining the anti-reflection coated lens array from an ingot of silicon. For sub-millimeter experiments, gray-scale lithography has also been used to make lens arrays on silicon wafers.
3 Metamaterial Lenslet Array Developments
In this section, we will describe our development of lenslet arrays based on metamaterials. Two completely different approaches, based on different technologies, were independently developed: the polypropylene-embedded mesh lenslets (Fig. 2a) and the silicon-etched-holes gradient refractive index (GRIN) lenslets (Fig. 2b). The working principle of the first was then implemented using the technology of the second, and SiN air-gap mesh lenslets were successfully demonstrated (Fig. 2c). More recently, a Si-embedded mesh GRIN lenslet directly coupled to an antenna has been developed (Fig. 2d).
3.1 Polypropylene-Embedded Metal-Mesh Phase-Delay Lenslets
The mesh technology has been employed for decades to fabricate filters at millimeter and sub-millimeter wavelengths [23]. Recent developments include mesh half-wave plates, flat mesh lenses, and mesh lenslet arrays [24,25,26,27]. All these designs rely on copper grids embedded into polypropylene, manufactured using photolithographic techniques. The grids behave like transmission lines that, in the case of the lenses, can be locally designed to provide the transmissions and the phases required to mimic the behavior of a classical lens. The design is performed using specifically written codes which are then verified using finite-element analysis (HFSS). Flat mesh lenslet arrays operating within the whole W-band (75–110 GHz) have been demonstrated and reported elsewhere [27]. They are designed to work in free space: The radiation from the lenses is coupled to the detectors via waveguide probe antennas (see Fig. 2a). The coupling of this type of arrays to Si-based detectors operating at cryogenic temperatures is not straightforward due to the differential thermal contractions that have to be taken into account and compensated.
3.2 Silicon-Etched GRIN Lenslets
An effective index can be achieved in by etching holes on a sub-wavelength pitch in a dielectric material such as Si. By radially varying the diameter of the holes, an effective gradient radial index is achieved and a gradient refractive index (GRIN) lens can be formed (Fig. 2b). In our approach, the lens is fabricated from Si wafers and directly coupled to the backside of an antenna-coupled detector, allowing more than 90% of the radiation to be transmitted from antenna to lenslet without the use of a backshort. Fabrication from Si and the use of planar anti-reflection materials eliminate alignment problems which might arise from dissimilar material coefficients of thermal expansion (CTE).
We developed a prototype lenslet array for operation at the 90 and 150 GHz bands as shown in Fig. 3a. The lenslet was simulated with finite-element analysis software—HFSS (Fig. 3b). Preliminary beam maps were obtained as shown in Fig. 3c. Measurements and simulations were in good agreement with a full width at half maximum (FWHM) of 17.0°. Simulations of the lenslet show losses (~ 20%) into the Si substrate which are caused primarily by the low angle of total internal reflection. There are approaches which can mitigate this, but they are computationally intensive and we have not yet extensively pursued them.
This approach is promising for long-wavelength (\(\lambda \gtrsim 2 \; {\text {mm}}\)) applications. However, for shorter wavelengths where a smaller pitch is required to keep features in the sub-wavelength regime, fabrication constraints become problematic. Achieving the same index with a smaller pitch reduces the volume of Si remaining between two adjacent holes. We have successfully fabricated devices with 40-μm distance between the edges of nearest neighbor holes which is sufficient for operation to ~ 180 GHz, but using thinner Si between holes introduces challenges with both fabrication and mechanical robustness.
3.3 Air-Gap Metal-Mesh Phase-Delay Lenslets
Our first attempt to transfer the polypropylene metal-mesh phase-delay technology into the silicon technology consisted of using 2-μm-thick SiN membranes supporting the metal grids (see Fig. 2c). The membranes were supported by silicon frames at their edge. In order to simplify the manufacturing processes, it was possible to design the mesh lens with equi-spaced membranes, at 250-μm distance from each other. The mesh lens was optimized to be coupled to a commercial waveguide probe antenna, which was then connected to a vector network analyzer for its tests. The SiN air-gap mesh lenslet was designed to operate in W-band. The finite-element model, an example of electromagnetic simulations, and a manufactured prototype are all shown in Fig. 4. The experimental characterization of the SiN mesh lens provided results very close to the expected performance. The narrowing of the beam can be seen by comparing the beam of the probe and that obtained adding the mesh lens in front of it (see Fig. 5a). Examples of modeled and measured co-polar and cross-polar beams are reported in Fig. 5b.
3.4 Silicon-Embedded Metal-Mesh GRIN Lenslets
The silicon-embedded metal-mesh GRIN lenslet was developed to efficiently couple incident radiation from a broadband sinuous antenna while using a fabrication approach with pitch limited only by traditional photolithography techniques, enabling scaling to higher frequencies. In this approach, a GRIN lenslet is formed from metal squares patterned on stacked Si substrates to synthesize a GRIN lenslet with higher indices than the native Si. This higher index GRIN lenslet is coupled to the backside of a sinuous antenna on Si. Light is collimated within the lens and exits via a planar anti-reflection coating to air. A planar anti-reflection coating is made by etching holes in Si and is easily extensible to broad bands by changing the hole diameters.
A prototype lenslet array was designed by first using a semi-analytical equal-time approach and then simulating and optimizing the structure in Ansys HFSS. The structure consists of a mesh grid with a 125-μm pitch filling 5 mm of the available 6.8 mm pixel pitch, with 34 total mesh layers separated by 100 μm in the full lenslet stack. This is shown schematically in Fig. 6a with a cross section of E field from the HFSS simulation shown in Fig. 6b. The smaller mesh diameter was chosen to allow simulations to converge in reasonable (less than one week) time scales using available computational tools. Simulations of single-cell elements suggest that 100 MB order of memory is needed per metal-mesh element to sufficiently converge the electromagnetic parameters. We have recently gained access to a research cluster with 4 TB of memory and shown better convergence in models. However, we have not yet utilized this to fully optimize a model.
The first version of silicon-embedded metal-mesh GRIN lenslet test sub-arrays, shown in Fig. 6c, was fabricated from 150-mm-diameter silicon-on-insulator (SOI) wafers with a 100-μm device layer bonded to a 520-μm handle wafer. Each wafer yielded 30 separate 19 mm × 20 mm platelets containing 7 lenses in a hexagonal array. The lens platelets were fabricated by electron beam evaporating 400 nm of copper on a liftoff photoresist pattern, deep reactive ion etching the platelet outline pattern and then removing the handle wafer by deep reactive ion etching from the reverse side. For subsequent silicon-etched GRIN lenslet arrays, we have developed fabrication processes to directly handle 100-μm wafers.
Measurements were carried out by mounting this sub-array directly to a Polarbear-2 focal plane and using a 6-degree-of-freedom beam mapper to characterize the optical response, allowing a fully three-dimensional beam map to be measured and compared to simulation (Fig. 7). The measured beam fits an ellipse with FWHM of 33.2° and 30.5° along the major and minor axes, respectively, whereas the simulated lenslet was narrower with FWHM of 30.8° and 28.0°, respectively. The wider beam may be due in part to the lower frequency of this particular plane with a frequency center of 85 GHz due to a fabrication error, whereas our simulations were carried out assuming a frequency of 90 GHz. Additionally, there has always been discrepancy between measured and simulated beams with hemispherical lenslets as well, and we are investigating sources of these discrepancies.
4 Conclusions
The optical coupling is one of the technological challenges currently faced in the design and fabrication of large arrays of detectors at millimeter and sub-millimeter wavelengths. Current solutions include antenna-coupled phased arrays, Si platelet lenslet horns, and Si hemispherical lenslets. In order to overcome the limits of these technologies, we have investigated and demonstrated alternative approaches based on metamaterials that will help enable future lens-coupled instruments.
The first approach, the Si-etched-holes GRIN lenslet, provided good results although it faced manufacturing limitations for the high-frequency CMB bands. The second approach, the air-gap SiN mesh lenslet, showed very good agreement with the simulations, but it is designed to couple antennas in free space. The third approach, the Si-embedded mesh- GRIN lenslets, allowed direct coupling within Silicon, a requirement for Si-based detectors. Ultimately, the upper-frequency limitation of these approaches is governed by the layer-to-layer thickness of the substrate. For the silicon-based approaches here, the 100-μm-thick layers used can operate to ~ 300 GHz, and initial work down to 75-μm-thick layers which would extend the range to nearly 500 GHz have been promising.
The next step in our developments will be to simplify the designs by reducing the number of grids and layers. This will be carried out by designing: (1) Si-embedded mesh lenslets based on phase delays; (2) lenslets with both transverse and longitudinal arbitrary GRIN patterns; (3) hybrid solutions including both phase delays and GRIN structures.
References
P. André, A. Men’Shchikov, S. Bontemps, V. Könyves, F. Motte, N. Schneider, P. Didelon, V. Minier, P. Saraceno, D. Ward-Thompson et al., From filamentary clouds to prestellar cores to the stellar IMF: initial highlights from the Herschel Gould Belt Survey. Astron. Astrophys. 518, L102 (2010)
P.A. Ade, N. Aghanim, M. Alves, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, C. Baccigalupi, A.J. Banday, R. Barreiro et al., Planck intermediate results. XIV. Dust emission at millimetre wavelengths in the galactic plane. Astron. Astrophys. 564, A45 (2014)
L.M. Mocanu, T.M. Crawford, J.D. Vieira, K.A. Aird, M. Aravena, J.E. Austermann, B.A. Benson, M. Béthermin, L.E. Bleem, M. Bothwell, J.E. Carlstrom, C.L. Chang, S. Chapman, H.-M. Cho, A.T. Crites, T. de Haan, M.A. Dobbs, W.B. Everett, E.M. George, N.W. Halverson, N. Harrington, Y. Hezaveh, G.P. Holder, W.L. Holzapfel, S. Hoover, J.D. Hrubes, R. Keisler, L. Knox, A.T. Lee, E.M. Leitch, M. Lueker, D. Luong-Van, D.P. Marrone, J.J. McMahon, J. Mehl, S.S. Meyer, J.J. Mohr, T.E. Montroy, T. Natoli, S. Padin, T. Plagge, C. Pryke, A. Rest, C.L. Reichardt, J.E. Ruhl, J.T. Sayre, K.K. Schaffer, E. Shirokoff, H.G. Spieler, J.S. Spilker, B. Stalder, Z. Staniszewski, A.A. Stark, K.T. Story, E.R. Switzer, K. Vanderlinde, R. Williamson, Extragalactic millimeter-wave point-source catalog, number counts and statistics from 771 deg2 of the SPT-SZ survey. Astrophys. J. 779, 61 (2013)
P. Ade, N. Aghanim, M. Alves, M. Arnaud, D. Arzoumanian, M. Ashdown, J. Aumont, C. Baccigalupi, A. Banday, R. Barreiro et al., Planck intermediate results. XXXV. Probing the role of the magnetic field in the formation of structure in molecular clouds (2015). arXiv:1502.04123
B.A. Benson, T. de Haan, J.P. Dudley, C.L. Reichardt, K.A. Aird, K. Andersson, R. Armstrong, M.L.N. Ashby, M. Bautz, M. Bayliss, G. Bazin, L.E. Bleem, M. Brodwin, J.E. Carlstrom, C.L. Chang, H.M. Cho, A. Clocchiatti, T.M. Crawford, A.T. Crites, S. Desai, M.A. Dobbs, R.J. Foley, W.R. Forman, E.M. George, M.D. Gladders, A.H. Gonzalez, N.W. Halverson, N. Harrington, F.W. High, G.P. Holder, W.L. Holzapfel, S. Hoover, J.D. Hrubes, C. Jones, M. Joy, R. Keisler, L. Knox, A.T. Lee, E.M. Leitch, J. Liu, M. Lueker, D. Luong-Van, A. Mantz, D.P. Marrone, M. McDonald, J.J. McMahon, J. Mehl, S.S. Meyer, L. Mocanu, J.J. Mohr, T.E. Montroy, S.S. Murray, T. Natoli, S. Padin, T. Plagge, C. Pryke, A. Rest, J. Ruel, J.E. Ruhl, B.R. Saliwanchik, A. Saro, J.T. Sayre, K.K. Schaffer, L. Shaw, E. Shirokoff, J. Song, H.G. Spieler, B. Stalder, Z. Staniszewski, A.A. Stark, K. Story, C.W. Stubbs, R. Suhada, A. van Engelen, K. Vanderlinde, J.D. Vieira, A. Vikhlinin, R. Williamson, O. Zahn, A. Zenteno, Cosmological constraints from Sunyaev–Zel’dovich-selected clusters with x-ray observations in the first 178 deg2 of the south pole telescope survey. Astrophys. J. 763, 147 (2013)
N. Hand, G.E. Addison, E. Aubourg, N. Battaglia, E.S. Battistelli, D. Bizyaev, J.R. Bond, H. Brewington, J. Brinkmann, B.R. Brown, S. Das, K.S. Dawson, M.J. Devlin, J. Dunkley, R. Dunner, D.J. Eisenstein, J.W. Fowler, M.B. Gralla, A. Hajian, M. Halpern, M. Hilton, A.D. Hincks, R. Hlozek, J.P. Hughes, L. Infante, K.D. Irwin, A. Kosowsky, Y.-T. Lin, E. Malanushenko, V. Malanushenko, T.A. Marriage, D. Marsden, F. Menanteau, K. Moodley, M.D. Niemack, M.R. Nolta, D. Oravetz, L.A. Page, N. Palanque-Delabrouille, K. Pan, E.D. Reese, D.J. Schlegel, D.P. Schneider, N. Sehgal, A. Shelden, J. Sievers, C. Sifón, A. Simmons, S. Snedden, D.N. Spergel, S.T. Staggs, D.S. Swetz, E.R. Switzer, H. Trac, B.A. Weaver, E.J. Wollack, C. Yeche, C. Zunckel, Evidence of galaxy cluster motions with the kinematic Sunyaev–Zel’dovich effect. Phys. Rev. Lett. 109(4), 041101 (2012)
B. Soergel, S. Flender, K. T. Story, L. Bleem, T. Giannantonio, G. Efstathiou, E. Rykoff, B. A. Benson, T. Crawford, S. Dodelson, S. Habib, K. Heitmann, G. Holder, B. Jain, E. Rozo, A. Saro, J. Weller, F. B. Abdalla, S. Allam, J. Annis, R. Armstrong, A. Benoit-Lévy, G. M. Bernstein, J. E. Carlstrom, A. Carnero Rosell, M. Carrasco Kind, F. J. Castander, I. Chiu, R. Chown, M. Crocce, C. E. Cunha, C. B. D’Andrea, L. N. da Costa, T. de Haan, S. Desai, H. T. Diehl, J. P. Dietrich, P. Doel, J. Estrada, A. E. Evrard, B. Flaugher, P. Fosalba, J. Frieman, E. Gaztanaga, D. Gruen, R. A. Gruendl, W. L. Holzapfel, K. Honscheid, D. J. James, R. Keisler, K. Kuehn, N. Kuropatkin, O. Lahav, M. Lima, J. L. Marshall, M. McDonald, P. Melchior, C. J. Miller, R. Miquel, B. Nord, R. Ogando, Y. Omori, A. A. Plazas, D. Rapetti, C. L. Reichardt, A. K. Romer, A. Roodman, B. R. Saliwanchik, E. Sanchez, M. Schubnell, I. Sevilla-Noarbe, E. Sheldon, R. C. Smith, M. Soares-Santos, F. Sobreira, A. Stark, E. Suchyta, M. E. C. Swanson, G. Tarle, D. Thomas, J. D. Vieira, A. R. Walker, N. Whitehorn, Detection of the kinematic Sunyaev–Zel’dovich effect with DES year 1 and SPT (2016)
Planck Collaboration, P.A.R. Ade, N. Aghanim, M. Arnaud, M. Ashdown, E. Aubourg, J. Aumont, C. Baccigalupi, A.J. Banday, R.B. Barreiro, N. Bartolo, E. Battaner, K. Benabed, A. Benoit-Lévy, M. Bersanelli, P. Bielewicz, J.J. Bock, A. Bonaldi, L. Bonavera, J.R. Bond, J. Borrill, F.R. Bouchet, C. Burigana, E. Calabrese, J.-F. Cardoso, A. Catalano, A. Chamballu, H.C. Chiang, P.R. Christensen, D.L. Clements, L.P.L. Colombo, C. Combet, B.P. Crill, A. Curto, F. Cuttaia, L. Danese, R.D. Davies, R.J. Davis, P. de Bernardis, G. de Zotti, J. Delabrouille, C. Dickinson, J.M. Diego, K. Dolag, S. Donzelli, O. Doré, M. Douspis, A. Ducout, X. Dupac, G. Efstathiou, F. Elsner, T.A. Enßlin, H.K. Eriksen, F. Finelli, O. Forni, M. Frailis, A.A. Fraisse, E. Franceschi, A. Frejsel, S. Galeotta, S. Galli, K. Ganga, R.T. Génova-Santos, M. Giard, E. Gjerløw, J. González-Nuevo, K.M. Górski, A. Gregorio, A. Gruppuso, F.K. Hansen, D.L. Harrison, S. Henrot-Versillé, C. Hernández-Monteagudo, D. Herranz, S.R. Hildebrandt, E. Hivon, M. Hobson, A. Hornstrup, K.M. Huffenberger, G. Hurier, A.H. Jaffe, T.R. Jaffe, W.C. Jones, M. Juvela, E. Keihänen, R. Keskitalo, F. Kitaura, R. Kneissl, J. Knoche, M. Kunz, H. Kurki-Suonio, G. Lagache, J.-M. Lamarre, A. Lasenby, M. Lattanzi, C.R. Lawrence, R. Leonardi, J. León-Tavares, F. Levrier, M. Liguori, P.B. Lilje, M. Linden-Vørnle, M. López-Caniego, P.M. Lubin, Y.-Z. Ma, J.F. Macías-Pérez, B. Maffei, D. Maino, D.S.Y. Mak, N. Mandolesi, A. Mangilli, M. Maris, P.G. Martin, E. Martínez-González, S. Masi, S. Matarrese, P. McGehee, A. Melchiorri, A. Mennella, M. Migliaccio, M.-A. Miville-Deschênes, A. Moneti, L. Montier, G. Morgante, D. Mortlock, D. Munshi, J.A. Murphy, P. Naselsky, F. Nati, P. Natoli, F. Noviello, D. Novikov, I. Novikov, C.A. Oxborrow, L. Pagano, F. Pajot, D. Paoletti, O. Perdereau, L. Perotto, V. Pettorino, F. Piacentini, M. Piat, E. Pierpaoli, E. Pointecouteau, G. Polenta, N. Ponthieu, G.W. Pratt, J.-L. Puget, S. Puisieux, J.P. Rachen, B. Racine, W.T. Reach, M. Reinecke, M. Remazeilles, C. Renault, A. Renzi, I. Ristorcelli, G. Rocha, C. Rosset, M. Rossetti, G. Roudier, J.A. Rubi no-Martín, B. Rusholme, M. Sandri, D. Santos, M. Savelainen, G. Savini, D. Scott, L.D. Spencer, V. Stolyarov, R. Sudiwala, R. Sunyaev, D. Sutton, A.-S. Suur-Uski, J.-F. Sygnet, J.A. Tauber, L. Terenzi, L. Toffolatti, M. Tomasi, M. Tucci, L. Valenziano, J. Valiviita, B. Van Tent, P. Vielva, F. Villa, L.A. Wade, B.D. Wandelt, W. Wang, I.K. Wehus, D. Yvon, A. Zacchei, A. Zonca, Planck intermediate results. XXXVII. Evidence of unbound gas from the kinetic Sunyaev–Zeldovich effect. Astron. Astrophys. 586, A140 (2016)
L. Knox, R. Scoccimarro, S. Dodelson, Impact of inhomogeneous reionization on cosmic microwave background anisotropy. Phys. Rev. Lett. 81(10), 2004 (1998)
J. Granot, R. Sari, The shape of spectral breaks in gamma-ray burst afterglows. Astrophys. J. 568(2), 820 (2002)
N. Whitehorn, T. Natoli, P. Ade, J. Austermann, J. Beall, A. Bender, B. Benson, L. Bleem, J. Carlstrom, C. Chang et al., Millimeter transient point sources in the sptpol 100 square degree survey. Astrophys. J. 830(2), 143 (2016)
S. Mairs, J. Lane, D. Johnstone, H. Kirk, K. Lacaille, G.C. Bower, G.S. Bell, S. Graves, S. Chapman et al., The JCMT transient survey: data reduction and calibration methods. Astrophys. J. 843(1), 55 (2017)
D. Leisawitz, E. Amatucci, R. Carter, M. DiPirro, A. Flores, J. Staguhn, C. Wu, L. Allen, J. Arenberg, L. Armus et al., The origins space telescope: mission concept overview, in Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, vol. 10698 (International Society for Optics and Photonics, 2018), p. 1069815
J. Glenn, C .M. Bradford, R. Amini, K. Alatalo, L. Armus, A. Benson, D. Farrah, A. Fyhrie, S. Lipscy, B. Moore et al., The galaxy evolution probe: a concept for a mid and far-infrared space observatory, in Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, vol. 10698 (International Society for Optics and Photonics, 2018), p. 106980L
S. Bryan, P. Ade, J.R. Bond, F. Boulanger, M. Devlin, S. Doyle, J. Filippini, L. Fissell, C. Groppi, G. Holder et al., Bfore: a CMB balloon payload to measure reionization, neutrino mass, and cosmic inflation (2018). arXiv:1807.05215
BICEP2 Collaboration, Keck Array Collaboration, SPIDER Collaboration, P.A.R. Ade, R.W. Aikin, M. Amiri, D. Barkats, S.J. Benton, C.A. Bischoff, J.J. Bock, J.A. Bonetti, J.A. Brevik, I. Buder, E. Bullock, G. Chattopadhyay, G. Davis, P.K. Day, C.D. Dowell, L. Duband, J.P. Filippini, S. Fliescher, S.R. Golwala, M. Halpern, M. Hasselfield, S.R. Hildebrandt, G.C. Hilton, V. Hristov, H. Hui, K.D. Irwin, W.C. Jones, K.S. Karkare, J.P. Kaufman, B.G. Keating, S. Kefeli, S.A. Kernasovskiy, J.M. Kovac, C.L. Kuo, H.G. LeDuc, E.M. Leitch, N. Llombart, M. Lueker, P. Mason, K. Megerian, L. Moncelsi, C.B. Netterfield, H.T. Nguyen, R. O’Brient, R.W. Ogburn IV, A. Orlando, C. Pryke, A.S. Rahlin, C.D. Reintsema, S. Richter, M.C. Runyan, R. Schwarz, C.D. Sheehy, Z.K. Staniszewski, R.V. Sudiwala, G.P. Teply, J.E. Tolan, A. Trangsrud, R.S. Tucker, A.D. Turner, A.G. Vieregg, A. Weber, D.V. Wiebe, P. Wilson, C.L. Wong, K.W. Yoon, J. Zmuidzinas, Antenna-coupled TES bolometers used in BICEP2, keck array, and spider. Astrophys. J. 812, 176 (2015)
C.L. Kuo, J.J. Bock, J.A. Bonetti, J. Brevik, G. Chattopadhyay, P.K. Day, S. Golwala, M. Kenyon, A.E. Lange, H.G. LeDuc, H. Nguyen, R.W. Ogburn, A. Orlando, A. Transgrud, A. Turner, G. Wang, J. Zmuidzinas, Antenna-coupled TES bolometer arrays for CMB polarimetry, in Proc SPIE Int Soc Opt Eng: Millimeter and Submillimeter Detectors and Instrumentation for Astronomy IV, vol. 7020 (2008). https://doi.org/10.1117/12.788588
J.P. Nibarger, J.A. Beall, D. Becker, J. Britton, H.-M. Cho, A. Fox, G.C. Hilton, J. Hubmayr, D. Li, J. McMahon, M.D. Niemack, K.D. Irwin, J. Lanen, K.W. Yoon, An 84 pixel all-silicon corrugated feedhorn for CMB measurements. J. Low Temp. Phys. 167, 522–527 (2012)
J. Hubmayr, J.W. Appel, J.E. Austermann, J.A. Beall, D. Becker, B.A. Benson, L.E. Bleem, J.E. Carlstrom, C.L. Chang, H.M. Cho, A.T. Crites, T. Essinger-Hileman, A. Fox, E.M. George, N.W. Halverson, N.L. Harrington, J.W. Henning, G.C. Hilton, W.L. Holzapfel, K.D. Irwin, A.T. Lee, D. Li, J. McMahon, J. Mehl, T. Natoli, M.D. Niemack, L.B. Newburgh, J.P. Nibarger, L.P. Parker, B.L. Schmitt, S.T. Staggs, J. Van Lanen, E.J. Wollack, K.W. Yoon, An all silicon feedhorn-coupled focal plane for cosmic microwave background polarimetry. J. Low Temp. Phys. 167, 904–910 (2012)
S.M. Simon, J. Austermann, J.A. Beall, S.K. Choi, K.P. Coughlin, S.M. Duff, P.A. Gallardo, S.W. Henderson, F.B. Hills, S.-P.P. Ho, J. Hubmayr, A. Josaitis, B.J. Koopman, J.J. McMahon, F. Nati, L. Newburgh, M.D. Niemack, M. Salatino, A. Schillaci, B.L. Schmitt, S.T. Staggs, E.M. Vavagiakis, J. Ward, E.J. Wollack, The design and characterization of wideband spline-profiled feedhorns for advanced ACTPol, in Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, vol. 9914 (2016), p. 991416
S.M. Simon, J.E. Golec, A. Ali, J. Austermann, J.A. Beall, S.M.M. Bruno, S.K. Choi, K.T. Crowley, S. Dicker, B. Dober, S.M. Duff, E. Healy, C.A. Hill, S.-P.P. Ho, J. Hubmayr, Y. Li, M. Lungu, J. McMahon, J. Orlowski-Scherer, M. Salatino, S. Staggs, E.J. Wollack, Z. Xu, N. Zhu, Feedhorn development and scalability for Simons observatory and beyond, in Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, vol. 10708 (2018), p. 107084B
A. Suzuki, K. Arnold, J. Edwards, G. Engargiola, A. Ghribi, W. Holzapfel, A.T. Lee, X.F. Meng, M.J. Myers, R. O’Brient, E. Quealy, G. Rebeiz, P. Richards, D. Rosen, P. Siritanasak, Multichroic dual-polarization bolometric detectors for studies of the cosmic microwave background, in Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, vol. 8452 (2012)
G. Pisano, P. Ade, C. Tucker, P. Mosley, M. Ng, Metal mesh based metamaterials for millimetre wave and THZ astronomy applications, in Proc. 8th UCMMT-2015 Workshop Cardiff (2016), pp. 1–4
G. Pisano, M. Ng, V. Haynes, B. Maffei, A broadband metal-mesh half-wave plate for millimetre wave linear polarisation rotation. Prog. Electromagn. Res. M 25, 101–114 (2012)
G. Pisano, M. Ng, B. Maffei, F. Ozturk, A dielectrically embedded flat mesh lens for millimetre waves applications. Appl. Opt. 52, 2218–2225 (2013)
G. Pisano, A. Shitvov, P. Moseley, C. Tucker, G. Savini, P. Ade, Development of large-diameter flat mesh-lenses for millimetre wave instrumentation, in Proc. SPIE, vol. 10708 (2018)
G. Pisano, B. Maffei, M. Robinson, P. Deo, M. van der Vorst, N. Trappe, C. Tucker, Planar mesh-lens arrays for millimeter and sub-mm wave focal planes, in Proc. IRMMW-THz, vol. 107080D (2016), pp. 1–2
Acknowledgements
The authors acknowledge the support for this work from the NASA Astrophysics Research and Analysis Program (NNH15ZDA001N-APRA), Award Number NNX17AE85G.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pisano, G., Austermann, J., Beall, J. et al. Development of Flat Silicon-Based Mesh Lens Arrays for Millimeter and Sub-millimeter Wave Astronomy. J Low Temp Phys 199, 923–934 (2020). https://doi.org/10.1007/s10909-019-02327-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10909-019-02327-y