Abstract
The paper aims at the synthesis and characterization of a wollastonite ceramic layer (belonging to the CaO-SiO2 system) deposited by PLD (pulsed laser deposition) method on a titanium metal substrate, in order to improve titanium biocompatibility and bioactivity. The silicate precursor mixture was synthesized by the sol–gel method. From this precursor was obtained the ceramic target by sintering at 1150 °C for 6 h. The obtained films on the titanium metal substrate were characterized by x-ray diffraction, scanning microscopy and by determination of the contact angle. Also, the materials were tested in vitro to determine the bioactivity and biocompatibility of thin films. The obtained results indicate the presence of wollastonite in films composition and a good bioactivity in the presence of cells, which suggests that this type of thin films is suitable for medical implants.
Similar content being viewed by others
References
M. Navarro, A. Michiardi, O. Castano, J.A. Planell, J. R. Soc. Interface 5, 1137–1158 (2008)
G. Ang, H. Ruiqiang, B. Long, T. Bin, K.C. Paul, Electrochim. Acta 271, 699–718 (2018)
M. Niinomi, Mater. Sci. Eng. A 243, 231–236 (1998)
N. Eliaz, Materials 12, 407 (2019)
I. Mutlu, Surf. Coat. Technol. 232, 396–402 (2013)
J.G. Lin, Y.C. Li, C.S. Wong, P.D. Hodgson, C.E. Wen, J. Alloys Compd. 485, 316–319 (2009)
T. Moskalewicz, M. Warcaba, S. Zimowski, A. Łukaszczyk, Metall. Mater. Trans. A. 50, 5914–5924 (2019)
W.S.W. Harunb, R.I.M. Asria, J. Aliasc, F.H. Zulkifli, K. Kadirgama, S.A.C. Ghani, J.H.M. Shariffuddin, Ceram. Int. 44(2), 1250–1268 (2018)
J.A.N. Olivera, Y. Su, X. Lu, P.H. Kuo, J. Du, D. Zhu, Bioact. Mater. 4, 261–270 (2019)
A. Mahapatro, Mater. Sci. Eng. C 55, 227–251 (2015)
M.Y. Zakaria, A.B. Sulong, N. Muhamad, M.R. Raza, M.I. Ramli, Mater. Sci. Eng. C 97, 884–895 (2019)
P. Feng, P. Wei, P. Li, C. Ga, C. Shuai, S. Peng, Mater. Charact. 97, 47–56 (2014)
L.D. Maxim, E.E. Mcconnell, Inhal. Toxicol. 17, 451–466 (2005)
X. Liu, C. Ding, Z. Wang, Biomater. 22, 2007–2012 (2001)
X. Liu, C. Ding, Mater. Lett. 57, 652–655 (2002)
J. Ballarre, R. Seltzer, E. Mendoza, J.C. Orellano, Y.W. Mai, C. García, S.M. Ceré, Mater. Sci. Eng. C 31, 545–552 (2011)
H. Ismail, R. Shamsudin, M.A.A. Hamid, Mater. Sci. Eng. C 58, 1077–1081 (2016)
M.M. Obeid, Int. J. Mater. Chem. 4, 79–87 (2014)
R. Shamsudin, F.A.A. Azam, M.A.A. Hamid, H. Ismial, Mater. 10, 1188 (2017)
M.B. Sedelnikova, E.G. Komarova, Y.P. Sharkeev, T.V. Tolkacheva, I.A. Khlusov, L.S. Litvinova, K.A. Yurova, V.V. Shupletsova, Bioact. Mater. 2, 177–184 (2017)
M.B. Sedelnikova, Y.P. Sharkeev, E.G. Komarova, I.A. Khlusov, V.V. Chebodaeva, Surf. Coat. Technol. 307, 1274–1283 (2016)
Z. Li, K.A. Khor, Encycl. Biomed. Eng. 203–212 (Elsevier, Amsterdam, Netherlands, 2019)
V. Cannillo, J. Colmenares-Angulo, L. Lusvarghi, F. Pierli, S. Sampath, J. Eur. Ceram. 29, 1665–1677 (2009)
S. Palakurthy, G.R.K. Venu, R.K. Samudrala, A.P. Abdul, Mater. Sci. Eng. C 98, 109–117 (2019)
J.D. Wright, N.A.J.M. Sommerdijk, Sol–gel Materials: Chemistry and Applications (Advanced Chemistry Texts), 1st edn. (CRC Press, Boca Raton, 2001)
A.J. Salinas, M. Vallet-Regi, Key Eng. Mater. 391, 141–158 (2009)
B. Ben-Nissan, A.H. Choi, I.J. Macha, S. Cazalbou, Handbook of Bioceramics and Biocomposites, 1st edn. (Springer, Cham, 2016)
R.B. Heimann, H.D. Lehmann, Bioceramic Coatings for Medical Implants: Trends and Techniques, 1st edn. (Wiley-VCH, Weinheim, 2015)
K. Verma, B. Chaudhary, V. Kumar, V. Sharma, M. Kumar, Vacuum. 146, 524–529 (2017)
A. Carradò, H. Pelletier, J. Faerber, G. Versini, I.N. Mihailescu, Mater. Sci. Forum 638–642, 530–535 (2010)
E. Gyorgy, S. Grigorescu, G. Socol, I.N. Mihailescu, D. Janackovic, A. Dindune, Z. Kanepe, E. Palcevskis, E.L. Zdrentu, S.M. Petrescu, Appl. Surf. Sci. 253, 7981–7986 (2007)
Z. Chen, J. Zhai, D. Wang, C. Chen, Ceram. Int. 44, 10204–10209 (2018)
A. De Bonis, M. Curcio, M. Fosca, I. Cacciotti, A. Santagata, R. Teghil, J.V. Rau, Mater. Lett. 175, 195–198 (2016)
A.H. Abdalsalam, A.A. Ati, A. Abduljabbar, T.A. Hussein, J. Inorg. Organomet. Polym. 29, 1084–1093 (2019)
R. Marnadu, J. Chandrasekaran, S. Maruthamuthu, P. Vivek, V. Balasubramani, P. Balraju, J. Inorg. Organomet. Polym. 30, 731–748 (2020)
E. Doustkhah, R.N. Zare, Y. Yamauchi, A. Taheri-Kafrani, H. Mohtasham, M. Esmat, Y. Ide, N. Fukata, S. Rostamnia, M.H. Sadeghi, M.H.N. Assadi, J. Mater. Chem. B 7, 7228–7234 (2019)
J. van Meerloo, G.J. Kaspers, J. Cloos, Mol. Biol. 731, 237–245 (2011)
E. Betzig, G.H. Patterson, R. Sougrat, O.W. Lindwasser, S. Olenych, J.S. Bonifacino, M.W. Davidson, J. Lippincott-Schwartz, H.F. Hess, Science 313, 1642–1645 (2006)
S. Mohammadian, A.V. Agronskaia, G.A. Blab, E.G. Donselaar, C. Heusb, N. Liv, J. Klumperman, H.C. Gerritsen, Ultramicroscopy 215, 113007 (2020)
M. Prodana, M. Duta, D. Ionita, D. Bojin, M.S. Stan, A. Dinischiotu, I. Demetrescu, Ceram. Int. 41, 6318–6325 (2015)
S. Stoleriu, C. Lungu, C.D. Ghitulica, A. Surdu, G. Voicu, A. Cucuruz, C.S. Turculet, L.T. Ciocan, Nanomaterials 10, 129 (2020)
G. Voicu, D. Miu, C.D. Ghitulica, S.I. Jinga, A.I. Nicoara, C. Busuioc, A.M. Holban, Ceram. Int. 46, 3904–3911 (2020)
Acknowledgements
The work has been funded by the Operational Programme Human Capital of the Ministry of European Funds through the Financial Agreement 51668/09.07.2019, SMIS code 124705.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Miu, DM., Jinga, SI., Voicu, G. et al. Characteristics of Wollastonite Ceramic Coatings Obtained by Pulsed Laser Deposition. J Inorg Organomet Polym 31, 1601–1607 (2021). https://doi.org/10.1007/s10904-020-01811-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10904-020-01811-3