A contact structure for intensification of heat and mass transfer processes at small expenditures of energy has been developed. The possible deformations of a contact structure in the process of operation have been estimated with the aid of a mathematical model. To determine the rigidity of the rods supporting the structure, a computer program has been developed that made it possible to locate the model deflections at the points of interest. The results of calculations of the rigidity of the bearing members of the developed contact structures are presented.
Similar content being viewed by others
References
A. S. Pushnov, A. S. Sokolov, and M. M. Butrin, Methods for intensifying the heat and mass transfer process in columnar apparatuses with contact facilities, Izv. Mosk. Gos. Tekhn. Univ. ″MAMI,″ 4, No. 1 (15), 237–242 (2013).
A. V. Dmitriev, O. S. Makusheva, K. V. Dmitrieva, and A. N. Nikolaev, Contact mass exchanger to increase output of active tower units, Chem. Pet. Eng., 47, Nos. 5–6, 319–323 (2011).
A. G. Laptev, A. N. Nikolaev, and M. M. Basharov, Methods of Enhancing and Modeling Heat and Mass Transfer Processes [in Russian], Teplotekhnik, Moscow (2011).
A. Pushnov, M. Lagutkin, I. Sidelnikov, A. Sokolov, E. Petrashova, and S. Maslova, Development of new ceramic packing for absorption devices with a larger, J. Environ. Eng. Landscape Manage, No. 18 (1), 38–44 (2010).
A. V. Dmitriev, O. S. Dmitrieva, I. N. Madyshev, G. S. Sagdeeva, and A. N. Nikolaev, Jet-Bubbling Contact Facility for Heat and Mass Transfer Processes, Patent RF 156379, B01D 3/20, published 10.11.2015, Byull. No. 31.
A. V. Dmitriev, A. N. Loginova, and O. S. Dmitrieva, Estimation of the effect of the characteristic features of the jet-bubbling contact facility on its mass, Vestn. Tekhnol. Univ., 18, No. 15, 41–43 (2015).
GOST 31838-2012, Columnar Apparatuses. Specifi cations. Adopted by the Interstate Standardization, Metrology, Certification Council, protocol No. 42 of 15.11.2012.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 90, No. 3, pp. 752–757, May–June, 2017.
Rights and permissions
About this article
Cite this article
Dmitriev, A.V., Sabanaev, I.A. & Dmitrieva, O.S. Rigidity of the Bearing Elements of the Contact Structures of a Mass-Transfer Apparatus. J Eng Phys Thermophy 90, 715–720 (2017). https://doi.org/10.1007/s10891-017-1619-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-017-1619-5