Abstract
Biodegradable polymers reinforced with an inorganic phase such as calcium phosphate glasses may be a promising approach to fulfil the challenging requirements presented by 3D porous scaffolds for tissue engineering. Scaffolds’ success depends mainly on their biological behaviour. This work is aimed to the in vitro study of polylactic acid (PLA)/CaP glass 3D porous constructs for bone regeneration. The scaffolds were elaborated using two different techniques, namely solvent-casting and phase-separation. The effect of scaffolds’ micro and macrostructure on the biological response of these scaffolds was assayed. Cell proliferation, differentiation and morphology within the scaffolds were studied. Furthermore, polymer/glass scaffolds were seeded under dynamic conditions in a custom-made perfusion bioreactor. Results indicate that the final architecture of the solvent-cast or phase separated scaffolds have a significant effect on cells’ behaviour. Solvent-cast scaffolds seem to be the best candidates for bone tissue engineering. Besides, dynamic seeding yielded a higher seeding efficiency in comparison with the static method.
Similar content being viewed by others
References
A.M. Sorkin, K.C. Dee, M.L. Knothe Tate, Am. J. Physiol. Cell Physiol. 287, C1527 (2004)
H.L. Holtorf, J.A. Jansen, A.G. Mikos, Adv. Exp. Med. Biol. 585, 225 (2006)
R.I. Abousleiman, V.I. Sikavitsas, Adv. Exp. Med. Biol. 585, 243 (2006)
T. Uemura, J. Dong, Y. Wang, H. Kojima, T. Saito, D. Iejima, M. Kikuchi, J. Tanaka, T. Tateishi, Biomaterials 24, 2277 (2003)
V. Kartsogiannis, K.W. Ng, Mol. Cell Endocrinol. 228, 79 (2004)
Y. Wang, S. Zhang, X. Zeng, L.L. Ma, W. Weng, W. Yan, M. Qian, Acta Biomater. 3, 191 (2007)
G.S. Stein, J.B. Lian, Endocr. Rev. 14, 424 (1993)
V. Kartsogiannis, K.W. Ng, Mol. Cell Endocrinol. 228, 79 (2004)
T.A. Owen, M. Aronow, V. Shalhoub, L.M. Barone, L. Wilming, M.S. Tassinari, M.B. Kennedy, S. Pockwinse, J.B. Lian, G.S. Stein, J. Cell Physiol. 143, 420 (1990)
J.E. Davies, J.M. Karp, D. Baksh. Methods of Tissue Engineering (Academic Press, San Diego,2002), p. 333
J. Handschel, H.P. Wiesmann, R. Depprich, N.R. Kubler, U. Meyer, Int. J. Oral Maxillofac. Implants 21, 890 (2006)
J.J. Blaker, J.E. Gough, V. Maquet, I. Notingher, A.R. Boccaccini, J. Biomed. Mater. Res. A 67, 1401 (2003)
G. Ciapetti, L. Ambrosio, L. Savarino, D. Granchi, E. Cenni, N. Baldini, S. Pagani, S. Guizzardi, F. Causa, A. Giunti, Biomaterials 24, 3815 (2003)
F. Zhao, Y. Yin, W.W. Lu, J.C. Leong, W. Zhang, J. Zhang, M. Zhang, K. Yao, Biomaterials 23, 3227 (2002)
B. Rai, S.H. Teoh, K.H. Ho, D.W. Hutmacher, T. Cao, F. Chen, K. Yacob, Biomaterials 25, 5499 (2004)
R.M. Day, A.R. Boccaccini, S. Shurey, J.A. Roether, A. Forbes, L.L. Hench, S.M. Gabe, Biomaterials 25, 5857 (2004)
J.Y. Zhang, B.A. Doll, E.J. Beckman, J.O. Hollinger, Tissue Eng. 9, 1143 (2003)
X.B. Yang, H.I. Roach, N.M. Clarke, S.M. Howdle, R. Quirk, K.M. Shakesheff, R.O. Oreffo, Bone 29, 523 (2001)
P. Kasten, R. Luginbuhl, M. van Griensven, T. Barkhausen, C. Krettek, M. Bohner, U. Bosch, Biomaterials 24, 2593 (2003)
D.W. Hutmacher, T. Schantz, I. Zein, K.W. Ng, S.H. Teoh, K.C. Tan, J. Biomed. Mater. Res. 55, 203 (2001)
S.F. El Amin, H.H. Lu, Y. Khan, J. Burems, J. Mitchell, R.S. Tuan, C.T. Laurencin, Biomaterials. 24, 1213 (2003)
Y.W. Wang, Q. Wu, G.Q. Chen, Biomaterials. 25, 669 (2004)
Y.S. Nam, J.J. Yoon, T.G. Park, J. Biomed. Mater. Res. 53, 1 (2000)
Y.W. Wang, Q. Wu, J. Chen, G.Q. Chen, Biomaterials 26, 899 (2005)
S. Sosnowski, P. Wozniak, M. Lewandowska-Szumiel, Macromol. Biosci. 6, 434 (2006)
H.C. Liu, I.C. Lee, J.H. Wang, S.H. Yang, T.H. Young, Biomaterials 25, 4047 (2004)
Y. Wang, T. Uemura, J. Dong, H. Kojima, J. Tanaka, T. Tateishi, Tissue Eng. 9, 1205 (2003)
A. Lichtenberg, G. Dumlu, T. Walles, M. Maringka, S. Ringes-Lichtenberg, A. Ruhparwar, H. Mertsching, A. Haverich, Biomaterials. 26, 555 (2005)
M. Navarro, M.P. Ginebra, J.A. Planell, S. Zeppetelli, L. Ambrosio, J. Mater. Sci. Mater. Med. 15, 419 (2004)
M. Navarro, C. Aparicio, M. Charles-Harris, M.P. Ginebra, E. Engel, J.A. Planell, Adv. Polymer Sci. 200, 209 (2006)
F.J. O’Briena, E. Farrell, M.A. Waller et al., in Topics in bio-mechanical engineering, ed. by P.J. Prendergast, P.E. McHugh (Trinity Centre for Bioengineering & National Centre for Biomedical Engineering Science, 2004), p. 172
M. Charles-Harris, M. Navarro, E. Engel, C. Aparicio, M.P. Ginebra, J.A. Planell, J. Mater. Sci. Mater. Med. 16, 1125 (2005)
J.J. Blaker, J.E. Gough, V. Maquet, I. Notingher, A.R. Boccaccini, J. Biomed. Mater. Res. A 67, 1401 (2003)
A.G. Mikos, G. Sarakinos, M.D. Lyman, D.E. Ingber, J.P. Vacanti, R. Langer, Biotechnol. Bioeng. 42, 716 (1993)
M. Charles-Harris, S. del Valle, E. Hentges, P. Bleuet, D. Lacroix, J.A. Planell, Biomaterials 28, 4429 (2007)
V.C. Maxwell, Wei Li, Meas. Sci. Technol. 18, 208 (2007)
K.-W. Lee, S. Wang, L. Lu et al., Tissue Engineering 12 (2006)
N. Price, S.P. Bendall, C. Frondoza, R.H. Jinnah, D.S. Hungerford, J. Biomed. Mater. Res. 37, 394 (1997)
M. Navarro, E. Engel, I. Amaral, M. Barbosa, J.A. Planell, M.P. Ginebra, J. Biomed. Mater. Res. doi:10.1002/jbm.a.31546
L. Montanaro, C.R. Arciola, D. Campoccia, M. Cervellati, Biomaterials 23, (2002)
J. Yao, S. Radin, G. Reilly, P.S. Leboy, P. Ducheyne, J. Biomed. Mater. Res. A 75, 794 (2005)
J. Yao, S. Radin, S. Leboy, P. Ducheyne, Biomaterials 26, 1935 (2005)
Y. Zhang, M. Zhang, J. Mater. Sci. Mater. Med. 15, 255 (2004)
A. El Ghannam, H. Amin, T. Nasr, A. Shama, Int. J. Oral. Maxillofac. Implants. 19, 184 (2004)
Z. Schwartz, C.H. Lohmann, J. Oefinger, L.F. Bonewald, D.D. Dean, B.D. Boyan, Adv. Dent. Res. 13, 38 (1999)
Acknowledgements
Financial funding from the Spanish Science Ministry is acknowledged (MAT2005-07244).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Charles-Harris, M., Koch, M.A., Navarro, M. et al. A PLA/calcium phosphate degradable composite material for bone tissue engineering: an in vitro study. J Mater Sci: Mater Med 19, 1503–1513 (2008). https://doi.org/10.1007/s10856-008-3390-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10856-008-3390-9