Abstract
Microencapsulated paraffin based phase change material (PCM) have been incorporated into Poly(methyl-methacrylate) (PMMA) matrix in order to enhance the thermo-mechanical properties. Calorimetric and mechanical analyses are carried out and the thermo regulating potential of PMMA/PCM composites is investigated. Results indicate that the PCM phase has a negligible effect on the glass transition temperature of the PMMA matrix, and the thermal regulating capability spans around body temperature absorbing or releasing a thermal energy up to 30 J/g. One of the effect of the PCM phase into the cement is the reduction of the peak temperature developed during the exothermal reaction.
Similar content being viewed by others
References
C. Migliaresi and L. Nicolais, Int. J. Artif. Organs 3 (1980) 114.
E. W. Morsher and D. Wirz, Acta Orthop. Belg. 68 (2002) 1.
K. Sun and M. A. K. Liebschner, Annals Biom. Eng. 32 (2004) 77.
R. Garcia, B. Vazquez and J. San Roman, J. Biomed. Mat. Res Part B:Appl. Biomat. 68 (2004) 94.
L. Chiarini, S. Figurelli, G. Pollastri, E. Torcia, F. Ferrari, M. Albanese and P. F. Nocini, J. Cranio-Maxillofacial Surg. 32 (2004) 5.
J. Kost and R. Langer, Adv. Drug Deliv. Rev. 46 (2001) 125.
A. S. Hoffman, ibid. 43 (2002) 3.
I. Espigares, C. Elvira, J. F. Mano, B. Vazquez, J. S. Roman and R. L. Reis, Biomaterials 23 (2002) 1883.
T. V. Cleynenbreugel, H. V. Oosterwyck and J. V. Sloten, J. Mat. Sci. Mat. Med. 13 (2002) 1245.
J. A. Mendez, M. R. Aguilar, G. A. Abraham, B. Vazquez, M. Dalby, L. Di Silvio and J. S. Roman, J. Biomed. Mat. Res. 62 (2002) 299.
A. Streubel, J. Siepmann and R. Bodmeier, Int. J. Pharm. 241 (2002) 279.
J. L. Sanchez, G. Guy, J. A. van Kan, T. Osipowicz and F. Watt, Nucl. Instr. Meth. Phys. Res. B 158 (1999) 185.
R. De Santis, F. Sarracino, F. Mollica, P. A. Netti, L. Ambrosio and L. Nicolais, Comp. Sci. Tech. 64 (2004) 861.
K. D. Kuhn, in “Bone Cements” (Spinger-Verlag, Heidelberg, 2000).
R. De Santis, F. Mollica, D. Ronca, L. Ambrosio and L. Nicolais, J. Mat. Sci. Mat. Med. 14 (2003) 83.
N. J. Dunne and J. F. Orr, ibid. 13 (2002) 17.
E. J. Harper and W. Bonfield, J. Biom. Mat. Res. 53 (2000) 605.
S. M. Kenny and M. Buggy, J. Mat. Sci. Mat. Med. 14 (2003) 923.
J. A. Burdick, A. J. Peterson and K. S. Anseth, Biomaterials 22 (2001) 1779.
N. J. Dunne and J. F. Orr, ibid. 22(2001) 1819–1826.
D. F. Ferrar and J. Rose, ibid. 22 (2001) 3005.
M. P. Ginebra, L. Albuixech, E. F. Barragan, C. Aparicio, F. J. Gil, J. San Roman, B. Vazquez and J. A. Planell, ibid. 23 (2002) 1873.
R. P. del Real, S. Padilla and M. Vallet-Regi, J. Biomed. Mat. Res. 52 (2000) 1.
C. V. Ragel and M. Vellet-Regi, ibid. 51 (2000) 424.
M. J. Dalby, L. Di Silvio, E. J. Harper and W. Bonfield, Biomaterials 22 (2001) 1739.
L. F. Boesel, M. H. V. Fernandes and R. L. Reis, J. Biomed. Mat. Res. Part B: Appl. Biomaterials. 70 (2004) 368.
J. L. Gilbert, D. S. Ney and E. P. Lautenschlager, Biomaterials 16 (1995) 1043.
C. I. Vallo, G. A. Abraham, T. R. Cuadrado and J. S. Roman, J. Biomed. Mat. Res. Part B: Appl. Biomaterials. 70 (2004) 407.
M. F. Koenig and S. J. Huang, Polymer 36 (1995) 1877.
S. J. Huang, M. F. Koenig and M. Huang, in “Biodegradable polymers and packaging,” edited by C. Ching, D. L. Kaplan and E. L. Thomas (Technomic, Lancaster, PA, 1993) p. 97.
P. A. Davis, S. J. Huang, L. Ambrosio, L. Nicolais and D. Ronca, “A Biodegradable Composite Artificial Tendon”, J. Mat. Sci. Mat. Med. 3 (1992) 359.
G. Peluso, O. Petillo, J. M. Anderson, L. Ambrosio, L. Nicolais, M. A. B. Melone, F. O. Eschenbach and S. J. Huang, J. Biomed. Mat. Res. 34 (1997) 327.
G. A. Abraham, A. Gallardo, A. Motta, C. Migliaresi and J. S. Roman, Macromol. Mater. Eng. 282 (2000) 44.
G. A. Abraham, A. Gallardo, J. San Roman, A. F. Mayoralas, M. Zurita and J. Vaquero. J. J. Biomed. Mat. Res. 64 (2003) 638.
J. A. Mendez, G. A. Abraham, M. Fernandez, B. Vazquez and J. S. Roman, ibid. 61 (2002) 66.
G. A. Abraham, C. I. Vallo, J. S. Roman and T. R. Cuadrado, J. Biomed. Mat. Res. Part B: Appl. Biomat. 70 (2004) 340.
B. Ying, Y. Kwok, Y. Li, Q. Zhu and C. Yeung, Polymer Test. 23 (2004) 541.
U. Stritih, Energy Build. 35 (2003) 1097.
B. He and F. Setterwall, Energy Conv. and Manag. 43 (2002) 1709.
M. N. A. Hawlader, M. S. Uddin and H. J. Zhu, Int. J. Energy Res. 26 (2002) 159.
M. M. Farid, A. M. Khudhair, S. A. K. Razack and S. Al-Hallaj, Energy Conv. Manag. 45 (2004) 1597.
C. Li, J. Mason and D. Yakimicki, J. Mat. Sci. Mat. Med. 15 (2004) 85.
A. Maffezzoli, D. Ronca, G. Guida, I. Pochini and L. Nicolais, ibid. 8 (1997) 75.
A. Borzacchiello, L. Ambrosio, L. Nicolais, E. J.Harper, K. E.Tanner and W. Bonfield, ibid. 9 (1998) 317.
R. De Santis, V. Ambrogi, C. Carfagna, L. Ambrosio and L. Nicolais, in “Proceeding of the 10th International Conference on Polymers in Medicine and Surgery” (Cambridge, Sept. 2004).
G. Lewis, J. Biomed. Mat. Res. 38 (1997) 155.
G. A. Abraham, K. Kesenci, L. Fambri, C. Migliaresi, A. Gallardo and J. San Roman, Macromol. Mater. Eng. 287 (2002) 938.
H. Bo, E. M. Gustafsson and F. Setterwall, Energy 24 (1999) 1015.
Z. Gu, H. Liu and Y. Li, Apll. Therm. Eng. 24 (2004) 2511.
A. M. Ahmed, W. Pak, D.L. Burke and J. Miller, J. Biomech. Eng. 104 (1982) 21.
A. B. Lennon and P. J. Prendergast, J. Biomech. 35 (2002) 311.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
De Santis, R., Ambrogi, V., Carfagna, C. et al. Effect of microencapsulated phase change materials on the thermo-mechanical properties of poly(methyl-methacrylate) based biomaterials. J Mater Sci: Mater Med 17, 1219–1226 (2006). https://doi.org/10.1007/s10856-006-0595-7
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10856-006-0595-7