Abstract
Ca1−x Rb x Cu3Ti4O12 (x = 0, 0.03, 0.05, 0.07 and 0.09) ceramics have been synthesized by the sol–gel method. The results of X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis indicate that a small amount of CuO and the grain boundary layers with Cu-rich and Ti-poor compositions are formed in the Rb-doped ceramic samples. The curves of dc electrical current density versus electric field strength have been collected at different temperatures, and the electrical conduction behaviors at grain boundary have been studied in detail based on the grain-boundary Schottky model. The results show that the formation of the Cu-rich and Ti-poor grain boundaries greatly affects the properties of grain-boundary Schottky potential barrier. For example, the barrier width increases with the increase on doping concentration x, and the barrier height (ФB) is also greatly enhanced as the concentration of dopants is very small, but as x is larger than 0.05, the ФB values reduce. These results should be ascribed to the second phases at grain boundary and the change of electronic structure.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A.P. Ramirez, M.A. Subramanian, M. Gardel, G. Blumberg, D. Blumberg, D. Li, T. Vogt, S.M. Shapiro, Solid State Commun. 115, 217 (2000)
M.A. Subramanian, D. Li, N. Duan, B.A. Reisner, A.W. Sleight, J. Solid State Chem. 151, 323 (2000)
T.B. Adams, D.C. Sinclair, A.R. West, Adv. Mater. 14, 1321 (2002)
J. Li, M.A. Subramanian, H.D. Rosenfeld, C.Y. Jones, B.H. Toby, A.W. Sleight, Chem. Mater. 16, 5223 (2004)
T. Fang, H. Shiau, J. Am. Chem. Soc. 87, 2072 (2004)
D.C. Sinclair, T.B. Adams, F.D. Morrison, A.R. West, Appl. Phys. Lett. 80, 2153 (2002)
M. Li, Z.J. Shen, M. Nygren, A. Feteira, D.C. Sinclair, A.R. West, J. Appl. Phys. 106, 104106 (2009)
M.A. Pires, C. Israel, W. Iwamoto, R.R. Urbano, O. Agüero, I. Torriani, C. Rettori, P.G. Pagliuso, L. Walmsley, Z. Le, J.L. Cohn, S.B. Oseroff, Phys. Rev. B 73, 224404 (2006)
S. Chung, I. Kim, S. Kang, Nat. Mater. 3, 774 (2004)
A.A. Felix, M.O. Orlandi, J.A. Varela, Solid State Commun. 151, 1377 (2011)
Y.-H. Lin, J. Cai, M. Li, C.-W. Nan, J. He, Appl. Phys. Lett. 88, 172902 (2006)
J. Cai, Y.-H. Lin, B. Cheng, C.-W. Nan, Appl. Phys. Lett. 91, 252905 (2007)
J. Yuan, Y.-H. Lin, H.F. Lu, B. Cheng, C.-W. Nan, J. Am. Chem. Soc. 94, 1966 (2011)
Y.-H. Lin, J. Cai, M. Li, C.-W. Nan, J. He, J. Appl. Phys. 103, 074111 (2008)
B. Cheng, Y.-H. Lin, J. Yuan, J. Cai, C.-W. Nan, X. Xiao, J. Appl. Phys. 106, 034111 (2009)
J. Liu, R.W. Smith, W. Mei, Chem. Mater. 19, 6020 (2007)
S. Jesurani, S. Kanagesan, R. Velmurugan, T. Kalaivani, J. Mater. Sci.: Mater. Electron. 23, 668 (2012)
S. Jesurani, S. Kanagesan, T. Kalaivani, K. Ashok, J. Mater. Sci.: Mater. Electron. 23, 692 (2012)
D.R. Clarke, J. Am. Ceram. Soc. 82, 485 (1999)
Acknowledgments
The authors would like to acknowledge the financial support from Chinese National Foundation of Natural Science (No. 51172166, 51202078) and Huazhong University of Science and Technology (No. 01-18-185011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, Z., Zhang, Y., Zhang, K. et al. Effect of grain-boundary behavior on the dc electric conduction in Rb-doped CaCu3Ti4O12 . J Mater Sci: Mater Electron 24, 1063–1067 (2013). https://doi.org/10.1007/s10854-012-0881-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-012-0881-8