Abstract
Iron as a main impurity in cartridge brass reduced ductility and formability of the rolled sheets. In the present investigation the effect of thermomechanical treatment on the formability of 70/30 brass containing iron impurity has been considered. As a new finding it has been shown that thermomechanical treatment can significantly improve ductility of 70/30 brass containing 0.35% iron impurity. This effect is believed to be a result of particle coarsening caused by TMT which affect the recrystallization of the brass sheets.
Similar content being viewed by others
References
Titarev NYA, Podo MS, Tsvet. Met. (1980) 85
Titarev NYA (1980) Met Sci Heat Treat 22:195
Malin AS, Yeung W (1988) Mater Forum 11:111
Oishi K, Sasaki I, Otani J (2003) Mater Lett 57:2280
Mould PR, Cotteril P (1967) J Mater Sci 2:241
Aghaie-Khafri M (2005) J Mater Sci 40:1135
Hansen N, Bay B (1972) J Mater Sci 7:1351
Davies RK, Randle V, Marshall GJ (1998) Acta Mater 46:6021
Baldwin WM (1958) J Acta Met 6:14
Thompson AW (1975) Acta Met 23:1337
Thompson AW (1977) Acta Met 25:83
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aghaie-Khafri, M., Mohebati-Jouibari, A. Thermomechanical treatment of 70/30 brass containing iron impurity. J Mater Sci 41, 7585–7589 (2006). https://doi.org/10.1007/s10853-006-0846-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-0846-5