Abstract
In this work, the performance of rapid prototyping (RP) based rapid tool is investigated during electrical discharge machining (EDM) of titanium as work piece using EDM 30 oil as dielectric medium. Selective laser sintering, a RP technique, is used to produce the tool electrode made of AlSi10Mg. The performance of rapid tool is compared with conventional solid copper and graphite tool electrodes. The machining performance measures considered in this study are material removal rate, tool wear rate and surface integrity of the machined surface measured in terms of average surface roughness (Ra), white layer thickness, surface crack density and micro-hardness on white layer. Since the machining process is a complex one, potentiality of application of a predictive tool such as least square support vector machine has been explored to provide guidelines for the practitioners to predict various machining performance measures before actual machining. The predictive model is said to be robust one as root mean square error in the range of 0.11–0.34 is obtained for various performance measures. A hybrid optimization technique known as desirability based grey relational analysis in combination with firefly algorithm is adopted for simultaneously optimizing the performance measures. It is observed that peak current and tool type are the significant parameters influencing all the performance measures.
Similar content being viewed by others
References
Adalarasan, R., & Santhanakumar, M. (2015). Parameter design in fusion welding of AA 6061 aluminium alloy using desirability grey relational analysis (DGRA) method. Journal of the Institution of Engineers (India): Series C, 96(1), 57–63. https://doi.org/10.1007/s40032-014-0128-y.
Aich, U., & Banerjee, S. (2014). Modeling of EDM responses by support vector machine regression with parameters selected by particle swarm optimization. Applied Mathematical Modelling, 38, 2800–2818. https://doi.org/10.1016/j.apm.2013.10.073.
Ali, S. H. (2014). Novel approach for generating the key of stream cipher system using random forest data mining algorithm. In 2013 sixth international conference on developments in eSystems engineering. https://doi.org/10.1109/dese.2013.54.
Al-Janabi, S., Alhashmi, S., & Adel, Z. (2020a). Design (more-G) model based on renewable energy & knowledge constraint. In Y. Farhaoui (Ed.), BDNT 2019, LNNS 81 (pp. 271–295). Basel: Springer. https://doi.org/10.1007/978-3-030-23672-4_20.
Al-Janabi, S., & Alkaim, A. F. (2020). A nifty collaborative analysis to predicting a novel tool (DRFLLS) for missing values estimation. Soft Computing, 24, 555–569. https://doi.org/10.1007/s00500-019-03972-x.
Al-Janabi, S., Mohammad, M., & Al-Sultan, A. (2020b). A new method for prediction of air pollution based on intelligent computation. Soft Computing, 24, 661–680. https://doi.org/10.1007/s00500-019-04495-1.
Al-Janabi, S., Rawat, S., Patel, A., & Al-Shourbaji, I. (2015). Design and evaluation of a hybrid system for detection and prediction of faults in electrical transformers. Electrical Power and Energy Systems, 67, 324–335.
Amorim, F. L., Lohrengel, A., Müller, N., Schäfer, G., & Czelusniak, T. (2013). Performance of sinking EDM electrodes made by selective laser sintering technique. The International Journal of Advanced Manufacturing Technology, 65, 1423–1428. https://doi.org/10.1007/s00170-012-4267-0.
Arthur, A., Dickens, P. M., & Cobb, R. C. (1996). Using rapid prototyping to produce electrical discharge machining electrodes. Rapid Prototyping Journal, 2(1), 4–12.
Assarzadeh, S., & Ghoreishi, M. (2013). A dual response surface-desirability approach to process modeling and optimization of Al2O3 powder-mixed electrical discharge machining (PMEDM) parameters. The International Journal of Advanced Manufacturing Technology, 64, 1459–1477. https://doi.org/10.1007/s00170-012-4115-2.
Bai, Y., Sun, Z., Zeng, B., Long, J., Li, L., Oliveira, J. V., et al. (2019). A comparison of dimension reduction techniques for support vector machine modeling of multi-parameter manufacturing quality prediction. Journal of Intelligent Manufacturing, 30, 2245–2256. https://doi.org/10.1007/s10845-017-1388-1.
Brajevic, I., & Ignjatovic, J. (2019). An upgraded firefly algorithm with feasibility-based rules for constrained engineering optimization problems. Journal of Intelligent Manufacturing, 30, 2545–2574. https://doi.org/10.1007/s10845-018-1419-6.
Caydas, U., Hascalık, A., & Ekici, S. (2009). An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM. Expert Systems with Applications, 36, 6135–6139. https://doi.org/10.1016/j.eswa.2008.07.019.
Czelusniak, T., Amorim, F. L., Higa, C. F., & Lohrengel, A. (2014). Development and application of new composite materials as EDM electrodes manufactured via selective laser sintering. The International Journal of Advanced Manufacturing Technology, 72, 1503–1512. https://doi.org/10.1007/s00170-014-5765-z.
Deng, J. L. (1982). Control problems of grey systems. Systems & Control Letters, 1(5), 288–294.
Deng, J. L. (1989). Introduction to grey system theory. The Journal of Grey System, 1, 1–24.
Dewangan, S., Biswas, C. K., & Gangopadhyay, S. (2014). Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29, 1387–1394. https://doi.org/10.1080/10426914.2014.930892.
Durr, H., Pilz, R., & Eleser, N. S. (1999). Rapid tooling of EDM electrodes by means of selective laser sintering. Computers in Industry, 39, 35–45.
Jaipuria, S., & Mahapatra, S. S. (2013). Reduction of bullwhip effect in supply chain through improved forecasting method: An integrated DWT and SVM approach. In B. K. Panigrahi, et al. (Eds.), SEMCCO 2013, Part II, LNCS 8298 (pp. 69–84). Basel: Springer.
Krasnogor, N., & Smith, J. (2005). A tutorial for competent memetic algorithms: Model, taxonomy, and design issues. IEEE Transactions on Evolutionary Computation, 9(5), 474–488. https://doi.org/10.1109/TEVC.2005.850260.
Li, C., Li, S., & Liu, Y. (2016). A least squares support vector machine model optimized by moth-flame optimization algorithm for annual power load forecasting. Applied Intelligence, 45, 1166–1178. https://doi.org/10.1007/s10489-016-0810-2.
Lin, J. L., & Lin, C. L. (2005). The use of grey-fuzzy logic for the optimization of the manufacturing process. Journal of Materials Processing Technology, 160, 9–14. https://doi.org/10.1016/j.jmatprotec.2003.11.040.
Liu, G., Gao, X., You, D., & Zhang, N. (2019a). Prediction of high power laser welding status based on PCA and SVM classification of multiple sensors. Journal of Intelligent Manufacturing, 30, 821–832. https://doi.org/10.1007/s10845-016-1286-y.
Liu, S., Hu, Y., Li, C., Lu, H., & Zhang, H. (2017). Machinery condition prediction based on wavelet and support vector machine. Journal of Intelligent Manufacturing, 28, 1045–1055. https://doi.org/10.1007/s10845-015-1045-5.
Liu, Z., Li, X., Wu, D., Qian, Z., Feng, P., & Rong, Y. (2019b). The development of a hybrid firefly algorithm for multi-pass grinding process optimization. Journal of Intelligent Manufacturing, 30, 2457–2472. https://doi.org/10.1007/s10845-018-1405-z.
Liu, C., Li, Y., Zhou, G., & Shen, W. (2018). A sensor fusion and support vector machine based approach for recognition of complex machining conditions. Journal of Intelligent Manufacturing, 29, 1739–1752. https://doi.org/10.1007/s10845-016-1209-y.
Mahdi, M. A., & Al-Janabi, S. (2020). A novel software to improve healthcare base on predictive analytics and mobile services for cloud data centers. In Y. Farhaoui (Ed.), BDNT 2019, LNNS 81 (pp. 320–339). Basel: Springer. https://doi.org/10.1007/978-3-030-23672-4_23.
Maity, K., & Mishra, H. (2018). ANN modelling and Elitist teaching learning approach for multi-objective optimization of μ-EDM. Journal of Intelligent Manufacturing, 29, 1599–1616. https://doi.org/10.1007/s10845-016-1193-2.
Majumder, H., & Maity, P. (2018). Application of GRNN and multivariate hybrid approach to predict and optimize WEDM responses for Ni–Ti shape memory alloy. Applied Soft Computing, 70, 665–679. https://doi.org/10.1016/j.asoc.2018.06.026.
Meena, V. K., & Nagahanumaiah, (2006). Optimization of EDM machining parameters using DMLS electrode. Rapid Prototyping Journal, 12(4), 222–228. https://doi.org/10.1108/13552540610682732.
Mirjalili, S. (2015). Moth-flame optimization algorithm: A novel nature-inspired heuristic paradigm. Knowledge-Based Systems, 89, 228–249. https://doi.org/10.1016/j.knosys.2015.07.006.
Mohanty, C. P., Mahapatra, S. S., & Singh, M. R. (2016). A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing, 27, 1171–1190. https://doi.org/10.1007/s10845-014-0942-3.
Mohanty, C. P., Mahapatra, S. S., & Singh, M. R. (2017). An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm. Engineering Science and Technology: An International Journal, 20, 552–562. https://doi.org/10.1016/j.jestch.2016.07.003.
Mohanty, A., Talla, G., & Gangopadhyay, S. (2014). Experimental investigation and analysis of EDM characteristics of Inconel 825. Materials and Manufacturing Processes, 29, 540–549. https://doi.org/10.1080/10426914.2014.901536.
Ozkaya, H., Yıldız, M., Yıldız, A. R., Bureerat, S., Yıldız, B. S., & Sait, S. M. (2020). The equilibrium optimization algorithm and the response surface-based metamodel for optimal structural design of vehicle components. Materials Testing, 62(5), 492–496. https://doi.org/10.3139/120.111509.
Panda, D. K., & Bhoi, R. K. (2005). Artificial neural network prediction of material removal rate in electro discharge machining. Materials and Manufacturing Processes, 20, 645–672. https://doi.org/10.1081/AMP-200055033.
Patowari, P. K., Saha, P., & Mishra, P. K. (2010). Artificial neural network model in surface modification by EDM using tungsten-copper powder metallurgy sintered electrodes. The International Journal of Advanced Manufacturing Technology, 51, 627–638. https://doi.org/10.1007/s00170-010-2653-z.
Pradhan, M. K., Das, R., & Biswas, C. K. (2009). Comparisons of neural network models on surface roughness in electrical discharge machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223, 801–808. https://doi.org/10.1243/09544054JEM1367.
Qudeiri, J. E. A., Mourad, A. H. I., Ziout, A., Abidi, M. H., & Elkaseer, A. (2018). Electric discharge machining of titanium and its alloys: Review. The International Journal of Advanced Manufacturing Technology, 96, 1319–1339. https://doi.org/10.1007/s00170-018-1574-0.
Raja, S. B., Pramod, C. V. S., Krishna, K. V., Ragunathan, A., & Vinesh, S. (2015). Optimization of electrical discharge machining parameters on hardened die steel using Firefly Algorithm. Engineering with Computers, 31, 1–9. https://doi.org/10.1007/s00366-013-0320-3.
Rao, G. K. M., Rangajanardhaa, G., Rao, D. H., & Rao, M. S. (2009). Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm. Journal of Materials Processing Technology, 209, 1512–1520. https://doi.org/10.1016/j.jmatprotec.2008.04.003.
Schwenzer, M., Auerbach, T., Miura, K., Döbbeler, B., & Bergs, T. (2019). Support vector regression to correct motor current of machine tool drives. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-019-01464-1.
Somashekhar, K. P., Ramachandran, N., & Mathew, J. (2010). Optimization of material removal rate in micro-EDM using artificial neural network and genetic algorithms. Materials and Manufacturing Processes, 25, 467–475. https://doi.org/10.1080/10426910903365760.
Tang, X., Zhang, Q., & Hu, L. (2020). An EKF-based performance enhancement scheme for stochastic nonlinear systems by dynamic set-point adjustment. IEEE Access, 8, 62261–62272. https://doi.org/10.1109/ACCESS.2020.2984744.
Tian, L., & Luo, Y. (2019). A study on the prediction of inherent deformation in fillet-welded joint using support vector machine and genetic optimization algorithm. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-019-01469-w.
Varun, A., & Venkaiah, N. (2015). Grey relational analysis coupled with firefly algorithm for multiobjective optimization of wire electric discharge machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 229, 1385–1394. https://doi.org/10.1177/0954405414535591.
Yang, X. S. (2009). Firefly algorithms for multimodal optimization. In O. Watanabe & T. Zeugmann (Eds.), SAGA 2009, LNCS 5792 (pp. 169–178). Berlin: Springer.
Yang, X. S. (2013). Multi objective firefly algorithm for continuous optimization. Engineering with Computers, 29, 175–184. https://doi.org/10.1007/s00366-012-0254-1.
Yıldız, A. R. (2019). A novel hybrid whale-Nelder-Mead algorithm for optimization of design and manufacturing problems. The International Journal of Advanced Manufacturing Technology, 105, 5091–5104. https://doi.org/10.1007/s00170-019-04532-1.
Yin, X., Zhang, Q., Wang, H., & Ding, Z. (2020). RBFNN-based minimum entropy filtering for a class of stochastic nonlinear systems. IEEE Transactions on Automatic Control, 65(1), 376–381. https://doi.org/10.1109/TAC.2019.2914257.
Zhang, Q., Hu, L., & Gow, J. (2020). Output feedback stabilization for MIMO semi-linear stochastic systems with transient optimisation. International Journal of Automation and Computing, 17(1), 83–95. https://doi.org/10.1007/s11633-019-1193-8.
Zhang, F., & Zhou, T. (2019). Process parameter optimization for laser-magnetic welding based on a sample-sorted support vector regression. Journal of Intelligent Manufacturing, 30, 2217–2230. https://doi.org/10.1007/s10845-017-1378-3.
Zhao, J., Li, Y., Zhang, J., Yu, C., & Zhang, Y. (2003). Analysis of the wear characteristics of an EDM electrode made by selective laser sintering. Journal of Materials Processing Technology, 138, 475–478. https://doi.org/10.1016/S0924-0136(03)00122-5.
Zhou, Y., Zhang, Q., Wang, H., Zhou, P., & Chai, T. (2018). EKF-based enhanced performance controller design for nonlinear stochastic systems. IEEE Transactions on Automatic Control, 63(4), 1155–1162. https://doi.org/10.1109/TAC.2017.2742661.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sahu, A.K., Mahapatra, S.S. Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes. J Intell Manuf 32, 2125–2145 (2021). https://doi.org/10.1007/s10845-020-01624-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-020-01624-8