Abstract
Scalar and tensor models of plastic flow of metals extending plasticity theory are considered over a wide range of temperatures and strain rates. Equations are derived using the physico-phenomenological approach based on modern concepts and methods of the physics and mechanics of plastic deformation. For hardening and viscoplastic solids, a new mathematical formulation of the boundary-value plasticity problem taking into account loading history is obtained. Results of testing of the model are given. A numerical finite-element algorithm for the solution of applied problems is described.
Similar content being viewed by others
References
V. L. Kolmogorov, Mechanics of Plastic Metal Working [in Russian], Ural Polytech. Inst.-Ural State Tech. Univ., Ekaterinburg (2001).
A. N. Mokhel, R. L. Salganik, and S. A. Khristianovich, “Plastic deformation of hardening metals and alloys: Governing equations and calculations using them,” Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza, No. 4, 119–141 (1983).
V. A. Likhachev and V. G. Malinin, Structural-Analytical Theory of Strength [in Russian], Nauka, St. Petersburg (1993).
A. Yu Ishlinskii and D. D. Ivlev, Mathematical Theory of Plasticity [in Russian], Fizmatlit (2001).
M. A. Shtremel, Strength of Alloys. Part 2. Deformation [in Russian], Moscow Institute of Steel and Alloys (1997).
S. B. Butdorf and B. Budiansky, “A mathematical theory of plasticity based on the concept of slip,” NASA Technical Note No. 1871 (1949).
I. V. Knets, Basic Directions in the Mathematical Theory of Plasticity [in Russian], Zinante, Riga (1971).
Yu. V. Grinyaev and V. E. Panin, “The field theory of defects at the mesolevel,” Dokl. Ross. Akad. Nauk, 353, No. 1, 37–39 (1997).
S. P. Kiselev, “Model of elastoplastic deformation of materials based on the gauge theory of defects with allowance for dissipation energy,” J. Appl. Mech. Tech. Phys., 45, No. 2, 292–300 (2004).
Yu. B. Rumer and M. Sh. Ryvkin, Thermodynamics, Statistical Physics and Kinetics [in Russian], Nauka, Moscow (1977).
V. M. Greshnov, A. V. Botkin, and A. V. Napalkov, “Use of the theory of plasticity of an isotropic material with anisotropic hardening in mathematical simulation of forming operations,” Izv. Vyssh. Uchebn. Zaved., Metallurg., No. 1, 27–30 (2000).
V. M. Greshnov, A. V. Botkin, A. V. Napalkov, and Yu. A. Lavrinenko, “Mathematical simulation of multitransition cold die forging processes based on the physicomathematical theory of plastic forming of metals. 1. Calculation of the strain-stress state,” Kuznech. Shtamp. Proiz., No. 8, 33–37 (2001).
V. M. Greshnov, F. F. Safin, and M. V. Greshnov, “Physico-phenomenological model of the resistance of metals to plastic strain for the calculation of plastic metal working. 1. Statement of the problem and derivation of the general equation,” Probl. Prochn., No. 6, 107–115 (2002).
V. M. Greshnov, F. F. Safin, and M. V. Greshnov, “Physico-phenomenological model of the resistance of metals to plastic strain for the calculation of plastic metal working. 2. Special cases of the model and its experimental verification,” Probl. Proch., No. 1, 87–97 (2003).
S. P. Kiselev, “Dislocation structure of shear bands in single crystals,” J. Appl. Mech. Tech. Phys., 47, No. 6, 857–866 (2006).
V. M. Greshnov, “Model of a viscoplastic solid taking into account loading history,” Izv. Ross. Akad. Nauk. Mekh. Zhidk. Gaza, No. 2, 117–125 (2005).
N. S. Mozharovskii and N. E. Kachalovskaya, Methods and Algorithms for Solution of Boundary-Value Problems [in Russian], Vysshaya Shkola, Kiev (1991).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 6, pp. 159–169, November–December, 2008.
Rights and permissions
About this article
Cite this article
Greshnov, V.M. One plasticity model for problems of plastic metal working. J Appl Mech Tech Phy 49, 1021–1029 (2008). https://doi.org/10.1007/s10808-008-0126-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10808-008-0126-z