Abstract
A ring shaped specimen is used for studying mixed mode fracture in brittle materials. The ring specimen is subjected to a compressive diametral load and contains two angled central cracks. A series of fracture tests are conducted under various mode mixities using the ring specimen. It is shown that the obtained experimental results are in a very good agreement with theoretical predictions of the modified maximum tangential stress criterion.
Similar content being viewed by others
References
Aliha M.R.M., Ayatollahi M.R., Ashtari R. (2006) Mode I and mode II fracture toughness testing for a coarse grain marble. Applied Mechanics and Materials 5-6: 181–188
Chang S.H., Lee C.I., Jeon S. (2002) Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc- type specimen. Engineering Geology 66: 79–97
Erdogan F., Sih G.C. (1963) On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, Transactions of ASME 85: 519–525
Huang J., Wang S. (1985) An experimental investigation concerning the comprehensive fracture toughness of some brittle rocks. International Journal of Rock Mechanics Mining Science & Geomechincs Abstract 22(2): 99–104
Hussain, M.A., Pu, S.L. and Underwood, J. (1974). Strain energy release rate for a crack under combined mode I and Mode II. Fracture Analysis. ASTM STP 560, Philadelphia 2-28.
Khan K., Al-Shayea N.A. (2000) Effect of specimen geometry and testing method on mixed I-II fracture toughness of a limestone rock from Saudi Arabia. Rock Mechanics and. Rock Engineering 33((3): 179–206
Krishnan G.R., Zhao X.L., Zaman M., Roegiers J.C. (1998) Fracture toughness of a soft sandstone. International Journal of Rock Mechanics Mining Science 35(6): 695–710
Lim I.L., Johnston I.W., Choi S.K., Boland J.N. (1994) Fracture testing of a soft rock with semi-circular specimens under three-point bending, Part 2 - mixed mode. International Journal of Rock Mechanics Mining Science & Geomechincs Abstract 31(3): 199–212
Schmidt, R.A. (1980). A microcrack model and its significance to hydraulic fracturing and fracture toughness testing. In: Proceedings of 21st US symposium rock mechanics 581–590.
Sih G.C. (1974) Strain-energy-density factor applied to mixed mode crack problems. International Journal of fracture 10: 305–321
Shiryaev A.M., Kotkis A.M. (1982) Methods for determining fracture toughness of brittle porous materials. Industrial Laboratory 48(9): 917–918
Smith D.J., Ayatollahi M.R., Pavier M.J. (2001) The role of T-stress in brittle fracture for linear elastic materials under mixed mode loading. Fatigue and Fracture of Engineering Materials and Structures 24: 137–150
Xeidakis G.S., Samaras I.S., Zacharopoulos D.A., Papakalitakis G.E. (1996) Crack growth in a mixed- mode loading on marble beams under three point bending. International Journal of Fracture 79: 197–208
Zipf R.K., Bieniawski Z.T. (1990) Mixed- mode fracture toughness testing of coal. International Journal of Rock Mechanics Mining Science & Geomechincs Abstract 27(6): 479–493
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aliha, M.R.M., Ayatollahi, M.R. & Pakzad, R. Brittle Fracture Analysis Using a Ring-Shape Specimen Containing Two Angled Cracks. Int J Fract 153, 63–68 (2008). https://doi.org/10.1007/s10704-008-9280-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-008-9280-9