Abstract
The paper investigates the buckling mode of failure of long interfacial cracks subjected to shear loading. A criterion which describes the transition from fracture to buckling instability failure modes is derived.
Similar content being viewed by others
References
Chiaia, B.M., Cornetti, P. and Firgo, B (2007), Triggering of dry snow slab avalanches: stress versus fracture mechanical approach, Cold Regions Science & Tech. doi:10.1016/j.coldregions.2007.08.003
Comninou M. (1978) The interface crack in a shear field. J. Appl. Mech. 45: 287–290
Comninou M, Dundrurs J. (1980) Effect of friction on the interface crack loaded in shear. J. Elasticity. 10: 203–212
Davidson B.D., Gharibian S.J., Yu L.J. (2000) Evaluation of energy release rate-based approaches for predicting delamination growth in laminated composites. Int. J. Fracture. 105: 343–365
Erdogan F. (1963) Stress distribution in a nonhomogeneous elastic plane with cracks. J. Appl. Mech. 30: 232–237
Erdogan F., Gupta C.D. (1971) Layered composites with an interface flaw. Int. J. Solids Struct. 7: 1089–1107
Liechti, K. M., and Knauss, W.G. (1981), The use of crack profile measurements to determine mode interactions of propagating cracks of material interfaces. In 1981 Advances in Aerospace Structures and Materials (Edited by S.S. Wang and W.J. Renton), ASME, New York.
Matos P.P.L., McMeeking R.M., Charalambides P.G., Drory M.D. (1989) A method for calculating stress intensities in bimaterial fracture. Int. J. Fracture. 40: 235–254
McClung D.M. (1979) Shear fracture precipitated by strain softening as a mechanism of dry slab avalanche release. Journal of Geophysical Research. 84(B7): 3519–3526
O'Brien T.K. (1982) Characterization of delamination onset and growth in a composite laminate. In: Reifsnider K.L. (eds) Damage in Composite Materials, ASTM STP 775. ASTM, Philadelphia, pp 140–147
Qian W., Sun C.T. (1998) Methods for calculation of stress intensity factors for interfacial cracks between two orthotropic solids. Int. J. Solids & Struct. 35: 3317–3330
Palmer A.C., Rice J.R. (1973) The growth of slip surfaces in the progressive failure of over-consolidated clay. Proceedings of the Royal Society of London A 332: 527–548
Schapery R.A., Davidson B.D. (1990) Prediction of energy release rate for mixed-mode delamination using classical plate theory. Appl. Mech. Rev. 43: S281–S287
Suo Z., Hutchinson J.W. (1990) Interface crack between two elastic layers. Int. J. Fracture. 43: 1–18
Venkatesha K.S., Ramamurthy T.S., Dattagura B. (1996) Generalized modified crack closure integral and its application to interface crack problems. Comput. Struct. 60(4): 665–676
Wang A.S.D., Crossman F.W. (1980) Initiation and growth of transverse cracks and edge delamination in composites, Parts 1 and 2. J. Compos. Mater. (Suppl.): 71–106
Williams M.L. (1959) The stresses around a fault or crack in dissimilar media. Bull. Seismological Soc. America. 49: 199–404
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kotousov, A., Harding, S. Buckling Failure of Interface Cracks Loaded in Shear. Int J Fract 148, 443–448 (2007). https://doi.org/10.1007/s10704-008-9216-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-008-9216-4