The paper presents the results of the electron microscopic microstructural study of a laboratory sample of a fibrous composite material. The resulting cross-sectional cut image of the sample was processed using software programs working with vector and raster file formats. The fiber cross-sectional cut areas, obtained in a vector graphical program, were compared with the areas calculated at various stages of the image preparation for evaluating the fiber cross-sectional cut area in a raster format. As a result, black-and-white shade adjustment modes, ensuring rapid and high-accuracy graphic processing of the fibrous material microstructure, were selected. The error of calculating the fiber cross-sectional cut area was in the limits of 1%, while the processing time reduced by tens of hours depending on the number of measured objects.
Similar content being viewed by others
References
M.A. Zil’bergleit, N.V. Marchenko, et al., Polimernye Materialy i Tekhnologii [In Russian], No. 4, 24-32 (2021). https://doi.org/10.32864/polymmattech-2021-7-4-24-32.
V.V. Gorzhanov, Trudy BSTU. Ser. IV. Khimiya, tekhnologiya organicheskikh veshchestv i biotekhnologiya [In Russian], No. 4, 311-314 (2008).
M.A. Zil’bergleit, V.N. Temruk, and T.A. Loban, Polimernye Materialy i Tekhnologii [In Russian], No. 3, 29-37 (2020). https://doi.org/10.32864/polymmattech-2020-6-3-29-37.
M.A. Zil’bergleit and V.N. Temruk, Polimernye Materialy i Tekhnologii [In Russian], 3, No. 1, 71-74 (2017).
N.N. Midukov, V.S. Kurov, et al., Pat. No. 2723972. A method Cross-Sectional Cut Preparation for Controlling the Parameters of a Cellulose-Containing Material [In Russian], Publ. 06/18/2020, Byul. No. 17.
V.S. Kurov and N.P. Midukov, Fibre Chemistry, 53, No. 2, 115-119 (2021). https://doi.org/10.1007/sl0692-021-10250-w
N.P. Midukov, Ya.V. Kazakov, et al., Fibre Chemistry, 52, No. 1. 51-57 (2020).
N.P. Midukov and V.S. Kurov, Khimiya Rastit. Syr’ya [In Russian], No. 4, 361-371 (2021). https://doi.org/10.14258/jcprm.2021049208.
DIN-54360 Testing of Pulp, Laboratory Beating of Pulp with the Jokro Mill, Germany (1977).
ISO 5269-2. Pulps Preparation of Laboratory Sheets for Physical Testing. Part 2. Rapid-Köthen Method, International Organization of Standardization, Switzerland, Geneva (2004).
M.J. Vasile, R. Nassar, et al., Micron, 30, 235-244 (1999).
Zs. Radi, K. Havancsak, and Sz.A. Kalacska, Int. Conf. on Nanoscience and Nanotechnology, Baris Technoorg Linda, Ltd, Eotvos Lorand university, Faculty of Science, 22 April, SA, Adelaide (2014).
Tescan MIRA3. URL: microscope/www.tescan.com/en-us/technology/sem/mra3.
Tescan MIRA3 microscope, Download Brochure. URL: www.tescan-uk.com/tecnology/sem/mira3.
N.V. Zharkov, M.V. Finkov, and R.G. Prokdi, AutoCAD 2016: Ultimate Guide [In Russian], Nauka i Tekhnika, Moscow (2016).
T. Ferreira and W. Rasband, Image £. User Guide (2012). http://imagej.nih.gov/ij/docs/guide.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie Volokna, No. 2, pp. 35-39, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Midukov, N.P., Kurov, V.S., Litvinov, M.A. et al. Comparative Evaluation of the Fibrous Composite Material Microstructure Using Digital Technologies. Fibre Chem 54, 88–92 (2022). https://doi.org/10.1007/s10692-022-10350-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-022-10350-1