Results of force field optimization studies carried out in the active working zones of spinning machines (combing zones and drawing frames) are presented. The obtained data represent the research stages concerning fiber contacts and resistance of spun products to transverse compression in these zones.
Similar content being viewed by others
References
A.F. Kapitanov, Frictional Processes in Spinning. Part 2 [In Russian], MGTU im. A.N. Kosygina, Moscow (2006).
A.F. Kapitanov, Izv. Vuzov. Tekhnol. Tekst. Prom-sti [In Russian], No. 3, 23-28 (1992).
A.F. Kapitanov, Theoretical Substantiation and Development of a Method for Modifying the Frictional Properties of Fibers in Spinning Processes. Dis. Cand. Sci. (Engineering) [In Russian], MGTA im. A.N. Kosygina, Moscow (1996).
N.E. Lyusova, Development of a Computer-Aided Design Method for the Preparation of a Combed Sliver. Dis. Cand. Sci. (Engineering) [In Russian], MGTU im. A.N. Kosygina, Moscow (2003).
N.E. Fedorova and S.A. Golaido, Analytical Design of Technological Processes. Textbook [In Russian], RGU im. A.N. Kosygina, Moscow (2018).
B.I. Savinovskii, G.I. Kuznetsov, et al., Izv. Vuzov. Tekhnol. Tekst. Prom-sti [In Russian], No. 3, 21-23 (1988).
N.E. Fedorova and A.F. Kapitanov, Izv. Vuzov. Tekhnol. Tekst. Prom-sti [In Russian], No. 4, 23-26 (2005).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 63-65, May-June, 2021.
Rights and permissions
About this article
Cite this article
Fedorov, N.E., Razumeev, K.E., Litvinov, A.M. et al. Force Field Optimization in the Active Working Zones of Spinning Machines. Fibre Chem 53, 215–217 (2021). https://doi.org/10.1007/s10692-021-10271-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-021-10271-5