We have solved the problem of estimating the failure characteristics of a bundle of single yarns for the case when the shapes of their load vs. elongation curves are not identical and are not segments of straight lines. In the calculations, we used a nonstationary arbitrary function of the load vs. elongation dependence. For analysis of the influence of different factors, we used the stochastic computer simulation method. We propose a simulation algorithm we used to perform the calculations for different combinations of the input parameter values. The calculations showed that the deciding influence on the strength utilization of the bundle turns out to be the coefficient of variation for the elongation-at-break for the single yarns.
Similar content being viewed by others
References
Yu. M. Vinter, “Prediction and estimation of the efficiency of blending processes in spinning,” Dissertation in competition for the academic degree of Doctor of Technical Sciences, Kostromskoi Tekhnologich. Inst., Kostroma (1982), pp. 310-329.
Yu. M. Vinter, V. I. Monakhov et al., Dizain i Tekhnologii, No. 48(90), 47-51 (2015).
Yu. M. Vinter, V. I. Monakhov, and M. N. Grechukhina, “Estimation of mechanical characteristics in a system of parallel yarns,” in: Design, Technologies, and Innovations in the Textile and Light Industries (INNOVATIONS-2015), Proceedings, International Scientific and Technical Conference, Pt. 2 [in Russian], MGUDT, Moscow (2015), pp. 266-269.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie Volokna, Vol. 50, No. 6, pp. 85-86, November-December, 2018.
Rights and permissions
About this article
Cite this article
Vinter, Y.M., Monakhov, V.I. Influence of the Arbitrary Shape of the Load vs Elongation Curve for Single Yarns on the Failure Characteristics of the Yarn Bundle. Fibre Chem 50, 566–568 (2019). https://doi.org/10.1007/s10692-019-10029-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-019-10029-0