Abstract
A design for a heater that allows realizing a system for control of heating of textured fibre using the contact time of the fibre with the heater as the controlling effect is proposed. The system for controlling the temperature conditions of heating the synthetic fibre during texturing is modeled and indicates the high efficiency of the proposed control method. Software was developed that provides for computer implementation of the temperature conditions control system.
Similar content being viewed by others
References
M. V. Lopatkina, Candidate Dissertation, Moscow State Textile University, Moscow (2006).
V. A. Usenko, Production of Twisted and Textured Chemical Fibres [in Russian], Legpromizdat, Moscow (1987).
L. P. Sebina, Candidate Dissertation, Moscow Textile Institute, Moscow (1968).
M. V. Lopatkina, Yu. D. Rumyantsev, and V. Sh. Berikashvili, Khim. Volokna, No. 6, 19–21 (2006).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 3, pp. 58–59, May–June, 2007.
Rights and permissions
About this article
Cite this article
Lopatkina, M.V., Rumyantsev, Y.D. & Lysachenko, I.V. System for automatic control of the temperature conditions in texturing of synthetic fibres. Fibre Chem 39, 247–249 (2007). https://doi.org/10.1007/s10692-007-0055-2
Issue Date:
DOI: https://doi.org/10.1007/s10692-007-0055-2