Abstract
The acceleration capability of HMX charges with a process additive is examined. The decrease in the acceleration capacity is largely determined by the charge porosity; for a fixed volume content of the pore-filling additive, the acceleration capability decreases in the series from polyethylene through viton to TNT. An evaluation procedure for the acceleration capability is proposed, based on the assumption that, at a 10: 1 ratio of the charge and steel (copper) plate thicknesses, the acceleration velocity varies in proportion to the initial velocity of the explosion products-plate contact boundary.
Similar content being viewed by others
References
I. M. Voskoboinikov and N. F. Voskoboinikova, “Estimation of the acceleration capability of high explosives,” in: Detonation, Proc. of the 2nd All-Union Workshop on Detonation, Chernogolovka (1981), pp. 64–67.
I. M. Voskoboinikov, “Velocities of acceleration of plates made of different materials by detonation products,” Combust., Expl., Shock Waves, 45, No. 3, 342–347 (2009).
I. M. Voskoboinikov and A. A. Kotomin, “Calculation of detonation parameters for explosive mixtures with inert additions,” Combust., Expl., Shock Waves, 21, No. 5, 600–603 (1985).
I. M. Voskoboinikov, A. A. Kotomin, and N. F. Voskoboinikova, “Effect of inert additives on the divergence speed of plates driven by mixed explosives,” Combust., Expl., Shock Waves, 18, No. 6, pp. 706–708 (1982).
L. P. Orlenko (ed.), Physics of Explosion [in Russian], Vol. 1, Fizmatlit, Moscow (2002).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Fizika Goreniya i Vzryva, Vol. 46, No. 3, pp. 134–138, May–June, 2010.
Rights and permissions
About this article
Cite this article
Voskoboinikov, I.M. Acceleration capability of explosive mixtures with a process additive. Combust Explos Shock Waves 46, 360–364 (2010). https://doi.org/10.1007/s10573-010-0049-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10573-010-0049-x