Abstract
Engineered wood products, such as oriented strand board (OSB), are widely used as the primary structural component in both residential and commercial lumber construction, primarily due to their renewability, aesthetic appeal, and excellent mechanical properties. Unfortunately, the inherent flammability of these wood-based composites poses an ongoing risk to society and the environment. In an effort to reduce its flammability, a polyelectrolyte complex (PEC) coating consisting of sodium polyborate (SPB) and polyethylenimine (PEI) was deposited on OSB using a simple two-dip process. This PEC treatment imparts self-extinguishing behavior to OSB and reduces the total heat release by 21% and total smoke release by 79%, while increasing the time to ignition by 18% relative to untreated OSB. Furthermore, the PEI/SPB coating adds little additional weight (5.8 wt%) to the oriented strand board, preserving visual aesthetics and maintaining mechanical properties. The main flame-retardant effect occurs by condensed phase action via a combination of intumescence and thermal barrier mechanisms. Improving the fire protection of OSB and other engineered wood materials through a simple and environmentally benign treatment will increase their potential as a largely renewable building material, promoting a sustainable bioeconomy.
Similar content being viewed by others
References
Abdelghany AM, ElBatal FH, ElBatal HA, EzzElDin FM (2014) Optical and FTIR structural studies of CoO-doped sodium borate, sodium silicate and sodium phosphate glasses and effects of gamma irradiation—a comparative study. J Mol Struct 1074:503–510. https://doi.org/10.1016/j.molstruc.2014.06.011
Alongi J, Ciobanu M, Malucelli G (2012) Thermal stability, flame retardancy and mechanical properties of cotton fabrics treated with inorganic coatings synthesized through sol–gel processes. Carbohydr Polym 87:2093–2099. https://doi.org/10.1016/j.carbpol.2011.10.032
Alongi J, Bosco F, Carosio F, Blasio D, Malucelli G (2014) A new era for flame retardant materials? Mater Today 17:152–153. https://doi.org/10.1016/j.mattod.2014.04.005
Bellanger H, Casdorff K, Muff LF, Ammann R, Burgert I, Michen B (2017) Layer-by-layer deposition on a heterogeneous surface: effect of sorption kinetics on the growth of polyelectrolyte multilayers. J Colloid Interface Sci 500:133–141. https://doi.org/10.1016/j.jcis.2017.02.048
Chan SY, Si L, Lee KI, Ng PF, Chen L, Yu B, Hu Y, Yuen RKK, Xin JH, Fei B (2017) A novel boron–nitrogen intumescent flame retardant coating on cotton with improved washing durability. Cellulose 25:843–857. https://doi.org/10.1007/s10570-017-1577-2
Davis R, Li Y-C, Gervasio M, Luu J, Kim YS (2015) One-pot, bioinspired coatings to reduce the flammability of flexible polyurethane foams. ACS Appl Mater Interfaces 7:6082–6092. https://doi.org/10.1021/acsami.5b01105
Decher G, Schlenoff JB (2012) Multilayer thin films: sequential assembly of nanocomposite materials. Wiley-VCH, Weinheim
Di Blasi C, Branca C, Galgano A (2007) Flame retarding of wood by impregnation with boric acid – pyrolysis products and char oxidation rates. Polym Degrad Stab 92:752–764. https://doi.org/10.1016/j.polymdegradstab.2007.02.007
Dogan M, Bayramli E (2014) The flame retardant effect of aluminum phosphinate in combination with zinc borate, borophosphate, and nanoclay in polyamide-6. Fire Mater 38:92–99. https://doi.org/10.1002/fam.2165
Dogan M, Dogan SD, Savas LA, Ozcelik G, Tayfun U (2021) Flame retardant effect of boron compounds in polymeric materials. Compos B Eng 222:109088. https://doi.org/10.1016/j.compositesb.2021.109088
Du J, Li H, Xu S, Qingwei Z, Meiqing J, Tang J (2019) A review of organophosphorus flame retardants (OPFRs): occurrence, bioaccumulation, toxicity, and organism exposure. Environ Sci Pollut Res 26:22126–22136. https://doi.org/10.1007/s11356-019-05669-y
Fang F, Zhang X, Meng Y, Ding X, Bao C, Li S, Zhang H, Tian X (2016) Boron-containing intumescent multilayer nanocoating for extinguishing flame on cotton fabric. Cellulose 23:2161–2172. https://doi.org/10.1007/s10570-016-0928-8
Fisher SG, Rodriguez-Melendez D, Iverson ET, Kolibaba TJ, Grunlan JC (2023) Fire protection of wood with an environmentally benign UV-cured polyelectrolyte complex. Polym Degrad Stab 215:110467. https://doi.org/10.1016/j.polymdegradstab.2023.110467
Friedel RA, Carlson GL (1971) Infrared spectra of ground graphite. J Phys Chem 75:1149–1151. https://doi.org/10.1021/j100678a021
Gaan S, Sun G (2007) Effect of phosphorus and nitrogen on flame retardant cellulose: a study of phosphorus compounds. J Anal Appl Pyrolysis 78:371–377. https://doi.org/10.1016/j.jaap.2006.09.010
Haile M, Fincher C, Fomete S, Grunlan JC (2015) Water-soluble polyelectrolyte complexes that extinguish fire on cotton fabric when deposited as ph-cured nanocoating. Polym Degrad Stab 114:60–64. https://doi.org/10.1016/j.polymdegradstab.2015.01.022
Hall S, Evarts B (2022) Fire loss in the United States during 2021 - NFPA. In: National Fire Protection Association. https://www.nfpa.org/~/media/fd0144a044c84fc5baf90c05c04890b7.ashx
Hill CAS (2006) Wood modification: chemical, thermal and other processes. John Wiley & Sons, Chichester, England
Holder KM, Smith RJ, Grunlan JC (2017) A review of flame retardant nanocoatings prepared using layer-by-layer assembly of polyelectrolytes. J Mater Sci 52:12923–12959. https://doi.org/10.1007/s10853-017-1390-1
Jagtoyen M, Derbyshire F (1998) Activated carbons from yellow poplar and white oak by H3PO4 activation. Carbon 36:1085–1097. https://doi.org/10.1016/s0008-6223(98)00082-7
Jimenez M, Guin T, Bellayer S, Dupretz R, Bourbigot S, Grunlan JC (2016) Microintumescent mechanism of flame-retardant water-based chitosan-ammonium polyphosphate multilayer nanocoating on cotton fabric. J ApplPolym Sci. https://doi.org/10.1002/app.43783
Johnston PK, Doyle E, Orzel RA (1988) Phenolics: a literature review of thermal decomposition products and toxicity. J Am Coll Toxicol 7:201–220. https://doi.org/10.3109/10915818809014520
Ketata N, Sanglar C, Waton H, Alamercery S, Delolme F, Raffin G, Grenier-Loustalot MF (2005) Thermal degradation of polyurethane bicomponent systems in controlled atmospheres. Polym Polym Compos 13:1–26. https://doi.org/10.1177/096739110501300101
Kolibaba TJ, Grunlan JC (2019) Environmentally benign polyelectrolyte complex that renders wood flame retardant and mechanically strengthened. Macromol Mater Eng. https://doi.org/10.1002/mame.201900179
Kolibaba TJ, Vest NA, Grunlan JC (2022) Polyelectrolyte photopolymer complexes for flame retardant wood. Mater Chem Front 6:1630–1636. https://doi.org/10.1039/d2qm00257d
Kurt R, Mengeloglu F, Meric H (2012) The effects of boron compounds synergists with ammonium polyphosphate on mechanical properties and burning rates of wood-HDPE polymer composites. Eur J Wood Wood Prod 70:177–182. https://doi.org/10.1007/s00107-011-0534-2
Landry SD, Morgan AB, Wilkie CA, Nelson GL (2012) Flame retardants - regulatory issues and Sustainability. ACS Symp Ser 523–538. https://doi.org/10.1021/bk-2012-1118.ch032
Lazar ST, Kolibaba TJ, Grunlan JC (2020) Flame-retardant surface treatments. Nat Rev Mater 5:259–275. https://doi.org/10.1038/s41578-019-0164-6
Leistner M, Abu-Odeh AA, Rohmer SC, Grunlan JC (2015) Water-based chitosan/melamine polyphosphate multilayer nanocoating that extinguishes fire on polyester-cotton fabric. Carbohydr Polym 130:227–232. https://doi.org/10.1016/j.carbpol.2015.05.005
Li H, Ma X-X, Gu Z-C, Wang X, Li J-Z, Jiang J, Fei B-H, Yang A-B (2020) Pyrolysis and combustion characteristics of boric acid and borax treated decorative bamboo filaments. BioResources 15:8146–8160. https://doi.org/10.15376/biores.15.4.8146-8160
Liao Y, Chen Y, Wan C, Zhang G, Zhang F (2021) An eco-friendly N P flame retardant for durable flame-retardant treatment of cotton fabric. Int J Biol Macromol 187:251–261. https://doi.org/10.1016/j.ijbiomac.2021.07.130
Ling C, Guo L, Wang Z (2023) A review on the state of flame-retardant cotton fabric: Mechanisms and applications. Ind Crops Prod 194:116264. https://doi.org/10.1016/j.indcrop.2023.116264
Liu J, Dong C, Zhang Z et al (2020a) Durable flame retardant cotton fabrics modified with a novel silicon–phosphorus–nitrogen synergistic flame retardant. Cellulose 27:9027–9043. https://doi.org/10.1007/s10570-020-03370-9
Liu J, Dong C, Zhang Z, Kong D, Sun H, Lu L (2020b) Multifunctional Flame-retarded and hydrophobic cotton fabrics modified with a cyclic phosphorus/polysiloxane copolymer. Cellulose 27:3531–3549. https://doi.org/10.1007/s10570-020-03016-w
Liu B, Zhao H, Wang Y (2022) Advanced flame-retardant methods for polymeric materials. Adv Mater. https://doi.org/10.1002/adma.202107905
Lu J, Jiang P, Chen Z, Li L, Huang Y (2021) Flame retardancy, thermal stability, and hygroscopicity of wood materials modified with melamine and amino trimethylene phosphonic acid. Constr Build Mater 267:121042. https://doi.org/10.1016/j.conbuildmat.2020.121042
Lunguleasa A, Dumitrascu A-E, Spirchez C, Ciobanu V-D (2021) Influence of the strand characteristics on the properties of oriented strand boards obtained from resinous and broad-leaved fast-growing species. Appl Sci 11:1784. https://doi.org/10.3390/app11041784
Magovac E, Vončina B, Budimir A, Jordanov I, Grunlan JC, Bischof S (2021) Environmentally benign phytic acid-based nanocoating for multifunctional flame-retardant/antibacterial cotton. Fibers 9:69. https://doi.org/10.3390/fib9110069
Magovac E, Vončina B, Jordanov I, Grunlan JC, Bischof S (2022) Layer-by-layer deposition: a promising environmentally benign flame-retardant treatment for cotton, polyester. Polyam Blended Text Mater 15:432. https://doi.org/10.3390/ma15020432
Mali P, Sonawane NS, Patil V, Lokhande G, Mawale R, Pawar N (2021) Morphology of wood degradation and flame retardants wood coating technology: an overview. Int Wood Prod J 13:21–40. https://doi.org/10.1080/20426445.2021.2011552
Mansour E (2012) FTIR spectra of pseudo-binary sodium borate glasses containing TeO2. J Mol Struct 1014:1–6. https://doi.org/10.1016/j.molstruc.2012.01.034
Morgan AB (2019) The future of flame retardant polymers – unmet needs and likely new approaches. Polym Rev 59:25–54. https://doi.org/10.1080/15583724.2018.1454948
Palen B, Rabaey MG, Rodriguez-Melendez D, Iverson ET, Kolibaba TJ, Grunlan JC (2022) Polymeric coacervate coating for flame retardant paper. Cellulose 29:4589–4597. https://doi.org/10.1007/s10570-022-04594-7
Qi P, Wang S, Wang W, Suna J, Yuan H, Zhang S (2022) Chitosan/sodium polyborate based micro-nano coating with high flame retardancy and superhydrophobicity for cotton fabric. Int J Biol Macromol 205:261–273. https://doi.org/10.1016/j.ijbiomac.2022.02.062
Qiu X, Li Z, Li X, Zhang Z (2018) Flame retardant coatings prepared using layer by layer assembly: a Review. Chem Eng J 334:108–122. https://doi.org/10.1016/j.cej.2017.09.194
Quan Y, Zhang Z, Tanchak RN, Wang Q (2022) A review on cone calorimeter for assessment of flame-retarded polymer composites. J Therm Anal Calorim 147:10209–10234. https://doi.org/10.1007/s10973-022-11279-7
Renneckar S, Zhou Y (2009) Nanoscale coatings on wood: polyelectrolyte adsorption and layer-by-layer assembled film formation. ACS Appl Mater Interfaces 1:559–566. https://doi.org/10.1021/am800119q
Schartel B, Hull TR (2007) Development of fire-retarded materials—interpretation of cone calorimeter data. Fire Mater 31:327–354. https://doi.org/10.1002/fam.949
Shebani AN, van Reenen AJ, Meincken M (2008) The effect of wood extractives on the thermal stability of different wood species. Thermochim Acta 471:43–50. https://doi.org/10.1016/j.tca.2008.02.020
Sinha A, Nairn JA, Gupta R (2010) Thermal degradation of bending strength of plywood and oriented strand board: a kinetics approach. Wood Sci Technol 45:315–330. https://doi.org/10.1007/s00226-010-0329-3
Soula M, Samyn F, Duquesne S, Landry V (2021) Innovative polyelectrolyte treatment to flame-retard wood. Polymers 13:2884. https://doi.org/10.3390/polym13172884
Tsuyumoto I (2020) Flame-retardant coatings for rigid polyurethane foam based on mixtures of polysaccharides and polyborate. J Coat Technol Res 18:155–162. https://doi.org/10.1007/s11998-020-00390-9
Tsuyumoto I, Oshio T (2009) Development of fire resistant laminated wood using concentrated sodium polyborate aqueous solution. J Wood Chem Technol 29:277–285. https://doi.org/10.1080/02773810903033721
Tsuyumoto I, Oshio T, Katayama K (2007) Preparation of highly concentrated aqueous solution of sodium borate. Inorg Chem Commun 10:20–22. https://doi.org/10.1016/j.inoche.2006.08.019
Tsuyumoto I, Miura Y, Hori Y (2010) Fire-resistant nonwovens of EVOH and pet treated with amorphous sodium polyborate. J Mater Sci 45:2504–2509. https://doi.org/10.1007/s10853-010-4222-0
Tsuyumoto I, Miura Y, Nirei M, Ikurumi S, Kumagai T (2011a) Highly flame retardant coating consisting of starch and amorphous sodium polyborate. J Mater Sci 46:5371–5377. https://doi.org/10.1007/s10853-011-5475-y
Tsuyumoto I, Onoda Y, Hashizume F, Kinpara E (2011b) Flame-retardant rigid polyurethane foams prepared with amorphous sodium polyborate. J Appl Polym Sci 122:1707–1711. https://doi.org/10.1002/app.34025
Uner IH, Deveci I, Baysal E, Turkoglu T, Toker H, Peker H (2016) Thermal analysis of oriental beech wood treated with some borates as fire retardants. Maderas-Cienc Tecnol 0–0. https://doi.org/10.4067/s0718-221x2016005000027
Vest NA, Afonso AO, Rodriguez-Melendez D, Ponis J, Smith DL, Iverson ET, Zhang Z, Marquez JAD, Banerjee S, Wang Q, Grunlan JC (2023) Polyelectrolyte complex for flame retardant silk. Polym Degrad Stab 216:110491. https://doi.org/10.1016/j.polymdegradstab.2023.110491
Wang Q, Li J, Winandy JE (2004) Chemical mechanism of fire retardance of Boric acid on Wood. Wood Sci Technol. https://doi.org/10.1007/s00226-004-0246-4
Wicklein B, Kocjan D, Carosio F, Camino G, Bergstrom L (2016) Tuning the nanocellulose–borate interaction to achieve highly flame retardant hybrid materials. Chem Mater 28:1985–1989. https://doi.org/10.1021/acs.chemmater.6b00564
Wróbel-Kwiatkowska M, Żuk M, Szopa J, Dymińska L, Mączka M, Hanuza J (2009) Poly-3-hydroxy butyric acid interaction with the transgenic flax fibers: FT-IR and Raman spectra of the composite extracted from a GM flax. Spectrochim Acta A Mol Biomol Spectrosc 73:286–294. https://doi.org/10.1016/j.saa.2009.02.034
Xie KL, Gao AQ, Zhang YS (2013) Flame retardant finishing of cotton fabric based on synergistic compounds containing boron and nitrogen. Carbohydr Polym 98:706–710. https://doi.org/10.1016/j.carbpol.2013.06.014
Zhang D, Tan GY, Tan KH (2021) Combined effect of flax fibers and steel fibers on spalling resistance of ultra-high performance concrete at high temperature. Cem Concr Compos 121:104067. https://doi.org/10.1016/j.cemconcomp.2021.104067
Acknowledgments
The authors would like to acknowledge the Texas A&M Materials Characterization Facility (RRID: SCR_022202), Texas A&M Soft Matter Facility (RRID: SCR_022482), Texas A&M University Microscopy and Imaging Center (RRID: SCR_022128), and the Department of Aerospace Engineering for infrastructural support.
Funding
The authors declare no funds, grants, or other support were received during the preparation of this manuscript.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and data collection. All authors reviewed and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Rodriguez-Melendez, D., Vest, N.A., Kolibaba, T.J. et al. Boron-based polyelectrolyte complex nanocoating for fire protection of engineered wood. Cellulose 31, 3083–3094 (2024). https://doi.org/10.1007/s10570-024-05773-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-024-05773-4