Abstract
As a sustainable nanomaterial, cellulose nanocrystal (CNC) based adsorbents exhibited great potential in wastewater treatment due to their high specific surface area, easy surface functionalization and excellent mechanical strength. Herein, a facile, green and energy-efficient method was proposed to fabricate the CNC/manganese dioxide (MnO2)/alginate (ALG) beads. The hybrid CNC/MnO2 nanocomposites were prepared by a simple and fine purification “one-pot” synthesis process and then anchored onto ALG networks directly to form the triphase beads in a continuous and automated mode. Interestingly, the CNC/MnO2/ALG beads exhibited excellent adsorption and oxidative degradation of methylene blue after a regeneration process. The decolorizing efficiency and capacity could reach up to 99.8% and 136.7 mg/g, respectively. Meanwhile, the CNC/MnO2/ALG beads can maintain their high efficiency (~ 95% of initial value) even after 10 cycles, indicating excellent recyclability and durability. It provides us a new route to design novel hybrid materials for environmental remediation.
Graphic abstract
Similar content being viewed by others
References
Batmaz R, Mohammed N, Zaman M et al (2014) Cellulose nanocrystals as promising adsorbents for the removal of cationic dyes. Cellulose 21:1655–1665. https://doi.org/10.1007/s10570-014-0168-8
Beck S, Bouchard J, Berry R (2012) Dispersibility in water of dried nanocrystalline cellulose. Biomacromol 13:1486–1494. https://doi.org/10.1021/bm300191k
Cheng M, Qin Z, Chen Y et al (2017) Facile one-step extraction and oxidative carboxylation of cellulose nanocrystals through hydrothermal reaction by using mixed inorganic acids. Cellulose 24:3243–3254. https://doi.org/10.1007/s10570-017-1339-1
Dassanayake RS, Rajakaruna E, Moussa H, Abidi N (2016) One-pot synthesis of MnO2-chitin hybrids for effective removal of methylene blue. Int J Biol Macromol 93:350–358. https://doi.org/10.1016/j.ijbiomac.2016.08.081
Dassanayake RS, Rajakaruna E, Abidi N (2019) Borax-cross-linked guar gum-manganese dioxide composites for oxidative decolorization of methylene blue. J Nanomater. https://doi.org/10.1155/2019/7232715
Eyley S, Thielemans W (2011) Imidazolium grafted cellulose nanocrystals for ion exchange applications. Chem Commun (Camb) 47:4177–4179. https://doi.org/10.1039/c0cc05359g
George M, Montemagno C (2017) Estimation of the sulfur ester content of cellulose nanocrystals prepared by sulfuric acid hydrolysis: a reproducible and fast infrared method. Wood Sci Technol 51:535–556. https://doi.org/10.1007/s00226-016-0885-2
Guo Z, Li Q, Li Z et al (2019) Fabrication of efficient alginate composite beads embedded with N-doped carbon dots and their application for enhanced rare earth elements adsorption from aqueous solutions. J Colloid Interface Sci. https://doi.org/10.1016/j.jcis.2019.12.030
He Y, Jiang B, Chen J et al (2018) Synthesis of MnO2 nanosheets on montmorillonite for oxidative degradation and adsorption of methylene blue. J Colloid Interface Sci 510:207–220. https://doi.org/10.1016/j.jcis.2017.09.066
Jamal R, Zhang L, Wang M et al (2016) Synthesis of poly(3,4-propylenedioxythiophene)/MnO2 composites and their applications in the adsorptive removal of methylene blue. Prog Nat Sci Mater Int 26:32–40. https://doi.org/10.1016/j.pnsc.2016.01.001
Ji H, Song X, Shi Z et al (2018) Reinforced-concrete structured hydrogel microspheres with ultrahigh mechanical strength, restricted water uptake, and superior adsorption capacity. ACS Sustain Chem Eng 6:5950–5958. https://doi.org/10.1021/acssuschemeng.7b04323
Karthick S, Muralidharan S, Lee HS et al (2019) Reliability and long-term evaluation of GO-MnO2 nano material as a newer corrosion monitoring sensor for reinforced concrete structures. Cem Concr Compos 100:74–84. https://doi.org/10.1016/j.cemconcomp.2019.03.012
Kuan WH, Chan YC (2012) pH-dependent mechanisms of methylene blue reacting with tunneled manganese oxide pyrolusite. J Hazard Mater 239–240:152–159. https://doi.org/10.1016/j.jhazmat.2012.08.051
Lee KY, Mooney DJ (2012) Alginate: properties and biomedical applications. Prog Polym Sci 37:106–126. https://doi.org/10.1016/j.progpolymsci.2011.06.003
Liu L, Wan Y, Xie Y et al (2012) The removal of dye from aqueous solution using alginate-halloysite nanotube beads. Chem Eng J 187:210–216. https://doi.org/10.1016/j.cej.2012.01.136
Liu Y, Wei J, Tian Y, Yan S (2015) The structure–property relationship of manganese oxides: highly efficient removal of methyl orange from aqueous solution. J Mater Chem A 3:19000–19010. https://doi.org/10.1039/c5ta05507e
Liu P, Guo X, Nan F et al (2017) Modifying mechanical, optical properties and thermal processability of iridescent cellulose nanocrystal films using ionic liquid. ACS Appl Mater Interfaces 9:3085–3092. https://doi.org/10.1021/acsami.6b12953
Ma SB, Lee YH, Ahn KY et al (2006) Spontaneously deposited manganese oxide on acetylene black in an aqueous potassium permanganate solution. J Electrochem Soc 153:C27. https://doi.org/10.1149/1.2130570
Mascheroni E, Rampazzo R, Ortenzi MA et al (2016) Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging materials. Cellulose 23:779–793. https://doi.org/10.1007/s10570-015-0853-2
Mohammed N, Grishkewich N, Berry RM, Tam KC (2015) Cellulose nanocrystal–alginate hydrogel beads as novel adsorbents for organic dyes in aqueous solutions. Cellulose 22:3725–3738. https://doi.org/10.1007/s10570-015-0747-3
Mohammed N, Grishkewich N, Waeijen HA et al (2016) Continuous flow adsorption of methylene blue by cellulose nanocrystal-alginate hydrogel beads in fixed bed columns. Carbohydr Polym 136:1194–1202. https://doi.org/10.1016/j.carbpol.2015.09.099
Mohammed N, Grishkewich N, Tam KC (2018) Cellulose nanomaterials: promising sustainable nanomaterials for application in water/wastewater treatment processes. Environ Sci Nano 5:623–658. https://doi.org/10.1039/c7en01029j
Nypelö T, Rodriguez-Abreu C, Kolen’ko Y, et al (2014) Microbeads and hollow microcapsules obtained by self-assembly of pickering magneto-responsive cellulose nanocrystals. ACS Appl Mater Interfaces 6:16851–16858. https://doi.org/10.1021/am504260u
Oliveira HS, Oliveira LCA, Pereira MC et al (2015) Nanostructured vanadium-doped iron oxide: catalytic oxidation of methylene blue dye. New J Chem 39:3051–3058. https://doi.org/10.1039/c4nj02063d
Parekh P, Parmar A, Chavda S, Bahadur P (2011) Modified calcium alginate beads with sodium dodecyl sulfate and clay as adsorbent for removal of methylene blue. J Dispers Sci Technol 32:1377–1387. https://doi.org/10.1080/01932691.2010.505113
Qiao H, Zhou Y, Yu F et al (2015) Effective removal of cationic dyes using carboxylate-functionalized cellulose nanocrystals. Chemosphere 141:297–303. https://doi.org/10.1016/j.chemosphere.2015.07.078
Qu J, Shi L, He C, Gao F et al (2014) Highly efficient synthesis of graphene/MnO2 hybrids and their application for ultrafast oxidative decomposition of methylene blue. Carbon 66:485–492. https://doi.org/10.1016/j.carbon.2013.09.025
Ren F, Li Z, Tan WZ, Liu XH et al (2018) Facile preparation of 3D regenerated cellulose/graphene oxide composite aerogel with high-efficiency adsorption towards methylene blue. J Colloid Interface Sci 532:58–67. https://doi.org/10.1016/j.jcis.2018.07.101
Rocher V, Bee A, Siaugue JM, Cabuil V (2010) Dye removal from aqueous solution by magnetic alginate beads crosslinked with epichlorohydrin. J Hazard Mater 178:434–439. https://doi.org/10.1016/j.jhazmat.2010.01.100
Song X, Huang X, Li Z et al (2019) Construction of blood compatible chitin/graphene oxide composite aerogel beads for the adsorption of bilirubin. Carbohydr Polym 207:704–712. https://doi.org/10.1016/j.carbpol.2018.12.005
Usov I, Nystrom G, Adamcik J et al (2015) Understanding nanocellulose chirality and structure-properties relationship at the single fibril level. Nat Commun 6:7564. https://doi.org/10.1038/ncomms8564
Wang Y, Zhang X, He X et al (2014) In situ synthesis of MnO2 coated cellulose nanofibers hybrid for effective removal of methylene blue. Carbohydr Polym 110:302–308. https://doi.org/10.1016/j.carbpol.2014.04.008
Yu HY, Zhang DZ, Lu FF, Yao J (2016) New approach for single-step extraction of carboxylated cellulose nanocrystals for their use as adsorbents and flocculants. ACS Sustain Chem Eng 4:2632–2643. https://doi.org/10.1021/acssuschemeng.6b00126
Zhang L, Nie Y, Hu C, Hu X (2011) Decolorization of methylene blue in layered manganese oxide suspension with H2O2. J Hazard Mater 190:780–785. https://doi.org/10.1016/j.jhazmat.2011.03.120
Zhou Y, Fu S, Liu H et al (2011) Removal of methylene blue dyes from wastewater using cellulose-based superadsorbent hydrogels. Polym Eng Sci 51:2417–2424. https://doi.org/10.1002/pen.22020
Zhou LJ, Li N, Shu J et al (2018) One-pot preparation of carboxylated cellulose nanocrystals and their liquid crystalline behaviors. ACS Sustain Chem Eng 6:12403–12410. https://doi.org/10.1021/acssuschemeng.8b02926
Acknowledgments
The authors acknowledge the financial support from the National Natural Science Foundation of China (21774068, 51773103, and 51573082) and Taishan Mountain Scholar Foundation (TS20081120 and tshw20110510).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing financial interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Diao, H., Zhang, Z., Liu, Y. et al. Facile fabrication of carboxylated cellulose nanocrystal–MnO2 beads for high-efficiency removal of methylene blue. Cellulose 27, 7053–7066 (2020). https://doi.org/10.1007/s10570-020-03260-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-020-03260-0