The sealing and relaxation characteristics of fluoroplast-4 gaskets are studied. It is established that, at the same specific pressure, the use of wider gaskets can increase sealing of the working pressure by about 25%. The influence of the stress level and time on the value of the relaxation modulus is also studied. A safety coefficient is proposed that takes the relaxation of specific pressures into account. Results of a control experiment conducted to assess the adequacy of the relaxation model are presented along with practical recommendations.
Similar content being viewed by others
References
N. Paxton and M. Wood, “Selecting a valve for cold service,” Valve World, 19, No. 9, 1–8 (2014).
G. V. Bozhko, Improvement of Hermetic Detachable Connections with Sealing Elements made of Materials with Load-dependent Physical and Mechanical Properties: Thesis [in Russian], Tambov State Technical University, Russia (2010).
V. D. Sold and A. V. Vasiliev, “Choice of filling reference width” [in Russian], Khimicheskoe i Neftegazovoe Mashinostroyenie, No. 4, 40–41 (2012).
V. D. Prodan, G. V. Bozhko, A. V. Vasiliev, and V. V. Cheremukhin, “Calculation of a flange connection with a rational (optimal) filling width” [in Russian], Khimicheskoe i Neftegazovoe Mashinostroyenie, No. 5, 30–31 (2017).
A. Ya. Goldman, A. A. Kuzmin, E. G. Matyushin, and I. V. Semenov, “Express method for assessing the sealing ability of polymer sealing elements” [in Russian], Plasticheskie Massy, No. 7, 38–39 (1986).
L. M. Kachanov, Creep Theory [in Russian], Moscow, Fizmatgiz (1960).
Yu. S. Urzhumtsev, Forcasting Long-term Resistance of Polymeric Materials [in Russian], Moscow, Nauka (1982).
M. A. Koltunov, Creep and Relaxation [in Russian], Moscow, Vysshaya Shkola (1976).
D. A. Khodzhaev and B. Kh. Eshmatov, “Nonlinear oscillations of a viscoelastic plate with lumped masses” [in Russian], Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 48, No. 6, 158–169 (2007).
F. B. Badalov, A. Abdukarimov, and B. A. Khudayarov, “Numerical study of the influence of rheological parameters on the vibration nature of hereditarily deformable systems” [in Russian], Vychislitel’nye Tekhnologii, 12, No. 4, 17–26 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 57, No. 11, pp. 42–45, November, 2021.
Rights and permissions
About this article
Cite this article
Kuzmin, A.A., Ponomarenko, E.A. & Yablokova, M.A. Evaluation of the Efficiency of Fluoropolymer Gaskets Taking Cold Flow into Account. Chem Petrol Eng 57, 970–975 (2022). https://doi.org/10.1007/s10556-022-01033-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-022-01033-z