Abstract
Parameters of a heterogeneous liquid-phase process with rapid chemical transformation on the interphase surface, which varies as a result of constriction in the height of the reactor channel in the radial direction and its expansion in the circumferential direction, are examined.
Variations are indicated for the rate of the process, the extent to which the initial component is transformed, and the temperature of the medium along the length of the reactor channel.
Similar content being viewed by others
References
A. V. Zheranin, “Determination of basic geometric parameters of a plug-flow reactor with laminar medium flow,” Khim. Neft. Mashinostr., No. 4, 13–14 (1997).
A. V. Zheranin, “Temperature profile in a plug-flow reactor with laminar medium flow,” Khim. Neft. Mashinostr., No. 5, 6–8 (1998).
USSR Author’s Certificate No. 324322, MKI B01J 19/28 (1991).
A. V. Zheranin and A. G. Ovcharenko, “Modeling a heterogeneous liquid-phase process with rapid chemical transformation,” Izv. Vuzov. Ser. Khim. Khim. Tekhnol., 12, No. 48, 89–91 (2005).
D. A. Frank-Kamenetskii, Diffusion and Heat Transfer in Chemical Kinetics [in Russian], Nauka, Moscow (1967).
V. V. Kafarov, Fundamentals of Mass Transfer [in Russian], Vysshaya Shkola, Moscow (1972).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 7, pp. 6–7, July, 2006.
Rights and permissions
About this article
Cite this article
Zheranin, A.V., Ovcharenko, A.G. Determination of parameters of a heterogeneous liquid-phase process in a plug-flow reactor. Chem Petrol Eng 42, 357–360 (2006). https://doi.org/10.1007/s10556-006-0107-0
Issue Date:
DOI: https://doi.org/10.1007/s10556-006-0107-0