Abstract
Multiplexing assays using microbeads in microfluidics offers high flexibility and throughput, but requires the ability to sort particles based on their physical properties. In this paper, we present a continuous method for separating microbeads that is compact, modular and adaptive, employing an optimized electrode layout that alternates sorting and concentration of microbeads using dielectrophoresis and a nested design. By simulating the combined effects of the hydrodynamic drag and dielectrophoresis forces on polystyrene beads, the parameters of the electrode layout and voltage configuration are optimized for maximum separation based on particle size with a small number of slanted planar electrodes. Experimental verification confirms the efficient separation of 10 μm and 5 μm beads, with ~98% of all concentrated beads sorted in two separate streams and only ~2% of 5 μm beads leaking into the 10 μm bead stream. In addition, this method is implemented on capillary-driven microfluidic chips for maximum portability and ease of use.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
D.J. Collins, T. Alan, A. Neild, Lab Chip 14, 1595 (2014)
S. Derveaux et al., Anal. Bioanal. Chem. 391, 2453 (2008)
J. Happel, H. Brenner, Low Reynolds Number Hydrodynamics : With Special Applications to Particulate Media (Kluwer Academic, Dordrecht, 1991)
D. Holmes, J.K. She, P.L. Roach, H. Morgan, Lab Chip 7, 1048 (2007)
E. Iswardy et al., Biosens. Bioelectron. 95, 174 (2017)
J.V. Jokerst et al., Small 7, 613 (2011)
T.B. Jones, IEEE Eng. Med. Biol. Mag. 22, 33 (2003)
D. Juncker, H. Schmid, U. Drechsler, H. Wolf, M. Wolf, B. Michel, N. de Rooij, E. Delamarche, Anal. Chem. 74, 6139–6144 (2002)
U. Kim, C.-W. Shu, K.Y. Dane, P.S. Daugherty, J.Y.J. Wang, H.T. Soh, PNAS 104, 20708 (2007)
V.V. Krishhan, I.H. Khan, P.A. Luciw, Crit. Rev. Biotechnol. 29, 29 (2009)
C.H. Kua, Y.C. Lam, I. Rodriguez, C. Yang, K. Youcef-Toumi, Anal. Chem. 80, 5454 (2008)
H. Li, Y. Zheng, D. Akin, R. Bashir, J. Microelectromech. Syst. 14, 103 (2005). https://doi.org/10.1109/JMEMS.2004.839124
C.T. Lim, Y. Zhang, Biosens. Bioelectron. 22, 1197 (2007)
A.H.C. Ng, U. Uddayasankar, A.R. Wheeler, Anal. Bioanal. Chem. 397, 991 (2010)
S. Nie et al., Lab Chip 14, 1087 (2014)
R. Pethig, Biomicrofluidics 4, 22811 (2010)
L. Riegger et al., Sensors Actuators A Phys. 126, 455 (2006)
P. Sajeesh, A.K. Sen, Microfluid. Nanofluidics 17, 1 (2014)
M.Y. Tang, H.C. Shum, Lab Chip 16(22), 4359 (2016). https://doi.org/10.1039/c6lc01121g
H.C. Tekin, M.A.M. Gijs, Lab Chip 13, 4711 (2013)
Y. Temiz, E. Delamarche, J. Micromech. Microeng. 24, 97001 (2014)
Y. Temiz, J. Skorucak, and E. Delamarche, in Proc. SPIE - Int. Soc. Opt. Eng. (2014a)
Y. Temiz, R.D. Lovchik, G.V. Kaigala, E. Delamarche, Microelectron. Eng. 132, 156 (2014b)
J. Tirapu-Azpiroz, Y. Temiz, E. Delamarche, Appl. Phys. Lett. 107, 204102 (2015)
M.D. Vahey, J. Voldman, Anal. Chem. 80, 3135 (2008)
X.B. Wang, J. Yang, Y. Huang, J. Vykoukal, F.F. Becker, P.R. Gascoyne, Anal. Chem. 72, 832 (2000)
T. Yasukawa, M. Suzuki, T. Sekiya, H. Shiku, T. Matsue, Biosens. Bioelectron. 22, 2730 (2007)
X. Yu et al., PLoS One 5, 7 (2010)
Acknowledgements
We are grateful to Tobias Guenzler and Hercules Neves (Unitec/SIX Semicondutores) and Ricardo Otha, Claudius Feger, Mathias Steiner, and Walter Riess (IBM) for discussions.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
ESM 1
(AVI 9450 kb)
Rights and permissions
About this article
Cite this article
Tirapu-Azpiroz, J., Temiz, Y. & Delamarche, E. Dielectrophoretic microbead sorting using modular electrode design and capillary-driven microfluidics. Biomed Microdevices 19, 95 (2017). https://doi.org/10.1007/s10544-017-0238-4
Published:
DOI: https://doi.org/10.1007/s10544-017-0238-4