Flexible pseudotyping of retrovirus using recombinase-mediated cassette exchange
- 662 Downloads
Develop an engineered cell line containing two flexible gene expression systems enabling the continuous production of tailor-made recombinant gammaretrovirus with predictable productivities through targeted integration.
Dual-FLEX cells (dFLEX) contain two independent recombinase-mediated cassette exchange (RMCE) systems which confer flexibility to the expression of different transgene and envelope combinations. The flexible envelope expression in dFLEX cells was validated by pseudotyping retrovirus particles with three different viral envelope proteins—GaLV, 4070A and VSV-G. Our results show that dFLEX cells are able to provide high titers of infectious retroviral particles with a single-copy integration of the envelope constructs after RMCE. The integrated CRE/Lox tagging cassette was amenable to express envelope proteins both using constitutive (i.e. CMV) and inducible (i.e. Tet-on) promoters.
dFLEX cell line provides predictable productivities of recombinant retrovirus pseudotyped with different envelope proteins broadening the tropism of particles that can be generated and thus accelerating the research and development of retrovirus-based products.
KeywordsAmphotropic envelope GalLV envelope Pseudotyping Recombinase Retrovirus RMCE VSV-G envelope
Murine leukemia viruses (MLV)-derived viral vectors are the core of several research tools widely used in biotechnology; their most attractive features are (i) the ability to integrate the viral genome into hosts’ genome (Debyser et al. 2015), (ii) the flexible tropism (Maetzig et al. 2011) (iii) the low immunogenicity (Soares et al. 2016) (iv) and, no cellular toxicity allowing stable and continuous particle production (Miller 1990). The wide use of retroviral vectors was initially hindered due to the relatively low titers of infectious particles attained (Cone and Mulligan 1984; Danos and Mulligan 1988). A variety of parameters such as (i) the origin of the cell line (Rodrigues et al. 2013), (ii) promoter strength and competition (Schambach et al. 2006) (iii) and culturing conditions (Coroadinha et al. 2006a, b, d) can affect vector productivity. To minimize these impacts and to accelerate the manufacturing platform packaging cell lines were designed. More recently, modular packaging cell lines such as Flp293A (Schucht et al. 2006) and 293FLEX (Coroadinha et al. 2006c) introduced the advantage of flexible expression of different transgenes in pre-defined high-expression chromosomal integration site(s). These cells were specifically designed to produce viral vectors with defined tropisms. However, the rapid evolving field of gene therapy is now asking for vectors with increased tissue specificities as a mechanism to direct target gene delivery into a specific tissue. In this work, we report the introduction of a second modular expression cassette into dFLEX cells offering flexibility to the envelope used for vector pseudotyping. This cassette is flanked by Cre/Lox recombination sites and works independently from the previously integrated retroviral genomic transgene expression cassette which is flanked by Flp/FRT recombination sites. The newly engineered cell line, named dual-FLEX (dFLEX) by holding two independent RMCE systems, allows tailoring and fasten the production of recombinant retroviral vectors with different combinations of envelope and vector transgene expression cassettes.
Materials and methods
Cell line development: transfection, selection, and cloning
To tag 293#3 gp11 and 293#3 gp22 cell lines (Coroadinha et al. 2006c; Carrondo et al. 2008) with the Cre/Lox cassette for site-specific recombination, cells were electroporated with pTagLoxPGFP-zeo using the NeoTransfection system (Thermo Fisher Scientific) according to manufacturer’s instructions (0.5 µg DNA per 106cells 1200 V, 20 ms, 2 pulses). Two days later, antibiotic selection was initiated by replacing culture medium with fresh DMEM (Gibco) supplemented with 10% (v/v) FBS, 200 μg mL−1 of Zeocin (Invivogen). eGFP-positive cell cloning was performed by MoFlo high-speed cell sorter (Beckman Coulter), 30 clones with medium and 30 clones with high fluorescence were collected and expanded in 50% (v/v) conditioned medium, 20% (v/v) FBS and 200 μg mL−1 of Zeocin. Surviving clones with high fluorescence were analyzed for single-copy cassette integration by RT-qPCR using as single-copy reference 293 FLEX-eGFP clone 293#3 gp22 Env 8 (Coroadinha et al. 2006c). To determine the percentage and intensity of eGFP-positive cells, a CyFlow Space (Sysmex, Horgen, Switzerland) flow cytometer was used. For further details on the cell lines, culture conditions and plasmid cloning please consult the Supplementary Information (‘Supplementary Materials and Methods’).
Recombinase mediated cassette exchange
For Cre/Lox site-specific cassette exchange, dFLEX#11 and dFLEX#22 cells were seeded at 5 × 104 cells per cm2 in six-well plates and co-transfected the next day with 2 μg of targeting envelope plasmid and 6 μg of pZeoCre recombinase-expressing plasmid per 106 cells, after mixing with PEI in a ratio of 1 μg of DNA to 1.5 μg of PEI. After 21 days under selective pressure, puromyci- resistant, eGFP-negative, surviving cells were isolated and cloned by limiting dilution in 50% conditioned media, 20% (v/v) FBS and 15 µg ml−1 of puromycin, amplified and cryopreserved before further analysis. Details on the PCR and RT-PCR to characterize the cells are indicated as ‘Supplementary Materials and Methods’.
Titration of infectious viral particles
Production and titration of infectious retroviral particles pseudotyped with gibbon ape leukemia virus (GaLV), amphotropic murine leukemia virus envelope (4070A) and vesicular stomatitis virus glycoprotein (VSV-G) were performed as described in Coroadinha et al. (2006c). Briefly, RD cells were seeded at 5 × 104 cells cm−2 in 96-well plates 1 day before infection. Transduction was performed in triplicates by removing the cell supernatant and infecting with 0.05 mL of filtered viral suspension supplemented with 8 mg mL−1 of polybrene (Sigma-Aldrich). Cells were incubated at 37 °C for 4 h after which 0.2 mL of fresh medium was added. Two days after infection, cells were fixed, washed and stained. The viral titer was determined by counting the stained blue cells using a phase-contrast inverted microscope. Further details on infectious particles production are indicated as Supplementary Information (‘Supplementary Materials and Methods’).
Development of a dual-FLEX cell line for versatile production of retroviral vectors
Production of GaLV and 4070A pseudotyped retrovirus particles using Cre/Lox RMCE
Both dFLEX#11 and dFLEX#22 cell lines were subjected to Cre/Lox RMCE using two different targeting plasmids for the constitutive expression of (i) 4070A or (ii) GaLV viral envelopes (Fig. 1c). The overall RMCE efficiency was approximately 2%, determined by the percentage of eGFP-negative cells in unselected population 48 h after co-transfection. After enriching the population for eGFP-negative cells with puromycin selection, surviving cells were cloned by limiting dilution. As observed in Fig. 1d, all pseudotypes generated infectious particles titers above 106 IP mL−1. In this study, FLEX#18 cell line was used as reference; FLEX#18 derives from 293#3 gp22 in which GaLV envelope was introduced using classical transfection and random integration method. The overall titers of both dFLEX#11 and dFLEX#22-derived clones were in average 1.5-fold to threefold higher than those of related FLEX#18 cells suggesting that a single copy of the envelope cassette is sufficient to provide high titers of infectious retroviral vectors.
Characterization of dFLEX cells after RMCE
Expression of VSV-G in dFLEX cells using Cre/Lox RMCE
Recombinant retroviruses have been widely used to generate a variety of gene therapy candidates, vaccines candidates and research tools to generate induced pluripotent stem cells. In this work, the successful development of a new engineered cell line enables the production of a variety of recombinant retrovirus particles using two independent RMCE systems (Fig. 1a). In the literature, a limited number of multiplex cell lines combining different RMCE systems are described (Kameyama et al. 2010; Turan et al. 2010, 2014; Anderson et al. 2012), however, none couples the advantages of multiplexing to the tailored production of viral vectors. In this work, the transgene expression flexibility reported and validated for 293 FLEX (Coroadinha et al. 2006c) was extended with the flexibility of viral envelope(s) expression to produce tailor-made recombinant retrovirus.
The Flp/FRT system present in 293#3 gp11 and 293#3 gp22 cells (Coroadinha et al. 2006c; Carrondo et al. 2008) was introduced into the genome of parental cells by retrovirus transduction resulting in the duplication of FW and F5 sites which now impose two major limitations for multiplexing (i) a limited number of additional FRT mutant sequences that can ensure totally independent recombination, and (ii) the possible excision of the transgene expression cassette while performing FLP-based RMCE (Turan et al. 2010, 2013). As a result, the aimed flexibility in envelope expression was herein achieved with the introduction of a RMCE based on Cre/LoxP recombination system (Fig. 1a and Fig. 1b).
The successful integration of the tagging plasmid in producer cells’ genome occurred in more than 65% of unselected cells. Moreover, in more than 90% of high-expression clones only one copy of the tagging plasmid was incorporated. This single-copy integration is essential to enable the use of RMCE technology (Turan et al. 2011). To evaluate the flexibility of the Cre/LoxP RMCE system to express different viral envelopes 4070A or GaLV pseudotyped retrovirus were produced (Fig. 1c). Even though the RMCE efficiency determined in unselected cell population was near 2%, the entrapment of cells that undergone recombination through puromycin selection guaranteed 100% recombinant cells in the final population. All isolated clones analyzed were positive for cassette exchange although a small percentage also incorporated additional copies of the targeting cassette due to random integration events (Fig. 2d). Different individual cell clones produced up to threefold more infectious particles (Fig. 1d) than 293 FLEX, suggesting that one single copy of the gene encoding the envelope protein is sufficient to support high titers of retroviral particles. Both MLV genome and structural genes expression levels were maintained when compared with the parental cell line (Fig. 2e) suggesting that neither RMCE nor associated cloning steps affected the overall expression of previously integrated retroviral components. Therefore, viral titers differences obtained between 293 FLEX and dFLEX are strictly due to the envelope expression.
dFLEX cells were subsequently challenged to produce retroviral particles pseudotyped with VSV-G envelope protein. This envelope is of high industrial interest due to its broad range tropism as well as enhanced stability nonetheless is associated with marked cytotoxicity which prevents long-term cell cultures. The introduction of inducible expression systems minimized VSV-G-associated cytotoxicity and enabled the development of VSV-G pseudotyped retroviral vectors. Here, dFLEX cells producing VSV-G pseudotypes under the control of an inducible gene expression system, using an autoregulated module, extended the advantages of dFLEX multiplexing system also to express cytotoxic proteins and validated the tagged chromosomal locus to support regulated gene expression systems.
In summary, herein we report the development of a novel cell line, dFLEX cells, for extended and tailored production of diverse recombinant retroviral products. dFLEX cells show flexibility of envelope expression while maintaining high production titers of infectious particles.
The authors acknowledge iNOVA4Health Research Unit (LISBOA-01-0145-FEDER-007344), which is co-funded by Fundação para a Ciência e Tecnologia (FCT)/Ministério da Ciência e do Ensino Superior, through national funds, and by FEDER under the PT2020 Partnership Agreement. The financial support received directly from FCT, Portugal (PTDC/EBB-BIO/118621/2010) and H.R. Soares and H.A. Tomás acknowledge FCT for the award of the individual grants SFRH/BD/81598/2011 and SFRH/BD/79022/2011 respectively.
Supplementary Materials and Methods.
Compliance with ethical standards
Conflict of interest
The authors declare no competing interests.
- Coroadinha AS, Schucht R, Gama-Norton L, Wirth D, Hauser H, Carrondo MJT (2006c) The use of recombinase mediated cassette exchange in retroviral vector producer cell lines: predictability and efficiency by transgene exchange. J Biotechnol 124:457–468. https://doi.org/10.1016/j.jbiotec.2006.01.037 CrossRefPubMedGoogle Scholar
- Rodrigues AF, Formas-Oliveira AS, Bandeira VS, Alves PM, Hu WS, Coroadinha AS (2013) Metabolic pathways recruited in the production of a recombinant enveloped virus: mining targets for process and cell engineering. Metab Eng 20:131–145. https://doi.org/10.1016/j.ymben.2013.10.001 CrossRefPubMedGoogle Scholar
- Schucht R, Coroadinha AS, Zanta-Boussif MA, Verhoeyen E, Carrondo MJT, Hauser H, Wirth D (2006) A new generation of retroviral producer cells: predictable and stable virus production by Flp-mediated site-specific integration of retroviral vectors. Mol Ther 14:285–292. https://doi.org/10.1016/j.ymthe.2005.12.003 CrossRefPubMedGoogle Scholar
- Soares HR, Castro R, Tomás HA, Rodrigues AF, Gomes-Alves P, Bellier B, Klatzmann D, Carrondo MJT, Alves PM, Coroadinha AS (2016) Tetraspanins displayed in retrovirus-derived virus-like particles and their immunogenicity. Vaccine 34:1634–1641. https://doi.org/10.1016/j.vaccine.2015.12.015 CrossRefPubMedGoogle Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.