Abstract
The contact problem for thermoelectric materials with functionally graded properties is considered. The material properties, such as the electric conductivity, the thermal conductivity, the shear modulus, and the thermal expansion coefficient, vary in an exponential function. Using the Fourier transform technique, the electro-thermoelastic problems are transformed into three sets of singular integral equations which are solved numerically in terms of the unknown normal electric current density, the normal energy flux, and the contact pressure. Meanwhile, the complex homogeneous solutions of the displacement fields caused by the gradient parameters are simplified with the help of Euler’s formula. After addressing the non-linearity excited by thermoelectric effects, the particular solutions of the displacement fields can be assessed. The effects of various combinations of material gradient parameters and thermoelectric loads on the contact behaviors of thermoelectric materials are presented. The results give a deep insight into the contact damage mechanism of functionally graded thermoelectric materials (FGTEMs).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
BELL, L. E. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science, 321(5895), 1457–1461 (2008)
POUDEL, B., HAO, Q., MA, Y., LAN, Y., MINNICH, A., YU, B., YAN, X., WANG, D., MUTO, A., VASHAEE, D., CHEN, X., LIU, J., DRESSELHAUS, M. S., CHEN, G., and REN, Z. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science, 320(5876), 634–638 (2008)
LEONOV, V., TORFS, T., FIORINI, P., and VAN HOOF, C. Thermoelectric converters of human warmth for self-powered wireless sensor nodes. IEEE Sensors Journal, 7(5), 650–656 (2007)
LALONDE, A. D., PEI, Y., WANG, H., and SNYDER, J. Lead telluride alloy thermoelectrics. Materials Today, 14(11), 526–532 (2011)
MEJRI, M., THIMONT, Y., MALARD, B., and ESTOURNÈS, C. Characterization of the thermo-mechanical properties of p-type (MnSi1.77) and n-type (Mg2Si0.6Sn0.4) thermoelectric materials. Scripta Materialia, 172, 28–32 (2019)
IOFFE, A. F. Byulleten’ Izobretenii (Invention Review), USSR 126158, USSR (1960)
KOIZUMI, M. FGM activities in Japan. Composites Part B: Engineering, 28, 1–4 (1997)
KUZNETSOV, V. L., KUZNETSOVA, L. A., KALIAZIN, A. E., and ROWE, D. M. High performance functionally graded and segmented Bi2Te3-based materials for thermoelectric power generation. Journal of Materials Science, 37(14), 2893–2897 (2002)
MAHAN, G. D. Inhomogeneous thermoelectrics. Journal of Applied Physics, 70(8), 4551–4554 (1991)
MÜLLER, E., DRAŠAR, Č., SCHILZ, J., and KAYSSER, W. A. Functionally graded materials for sensor and energy applications. Materials Science and Engineering: A, 362, 17–39 (2003)
DASHEVSKY, Z., SHUSTERMAN, S., DARIEL, M. P., and DRABKIN, I. Thermoelectric efficiency in graded indium-doped PbTe crystals. Journal of Applied Physics, 92(3), 1425–1430 (2002)
ANATYCHUK, L. I., VIKHOR, L. N., STRUTYNSKA, L. T., and TERMENA, I. S. Segmented generator modules using Bi2Te3-based materials. Journal of Electronic Materials, 40(5), 957–961 (2011)
JU, C., DUI, G., UHL, C. G., CHU, L., WANG, X., and LIU, Y. Performance analysis of a functionally graded thermoelectric element with temperature-dependent material properties. Journal of Electronic Materials, 48(9), 5542–5554 (2019)
HE, R., SCHIERNING, G., and NIELSCH, K. Thermoelectric devices: a review of devices, architectures, and contact optimization. Advanced Materials Technologies, 3(4), 1700256 (2018)
HATZIKRANIOTIS, E., ZORBAS, K. T., SAMARAS, I., KYRATSI, T., and PARASKEVOPOULOS, K. M. Efficiency study of a commercial thermoelectric power generator (TEG) under thermal cycling. Journal of Electronic Materials, 39(9), 2112–2116 (2010)
BARAKO, M. T., PARK, W., MARCONNET, A. M., ASHEGHI, M., and GOODSON, K. E. Thermal cycling, mechanical degradation, and the effective figure of merit of a thermoelectric module. Journal of Electronic Materials, 42(3), 372–381 (2013)
HU, X. K., ZHANG, S. M., ZHAO, F., LIU, Y., and LIU, W. S. Thermoelectric device: contact interface and interface materials (in Chinese). Journal of Inorganic Materials, 34(3), 269–278 (2019)
ZHANG, Q. H., BAI, S. Q., and CHEN, L. D. Technologies and applications of thermoelectric devices: current status, challenges and prospects (in Chinese). Journal of Inorganic Materials, 34(3), 279–293 (2019)
SU, J., KE, L. L., and WANG, Y. S. Two-dimensional fretting contact analysis of piezoelectric materials. International Journal of Solids and Structures, 73–74, 41–54 (2015)
SU, J., KE, L. L., and WANG, Y. S. Fretting contact of a functionally graded piezoelectric layered half-plane under a conducting punch. Smart Materials and Structures, 25(2), 25014 (2016)
SU, J., KE, L. L., WANG, Y. S., and XIANG, Y. Axisymmetric torsional fretting contact between a spherical punch and an FGPM coating. Applied Mathematical Modelling, 52, 576–589 (2017)
VOLKOV, S. S., VASILIEV, A. S., AIZIKOVICH, S. M., and MITRIN, B. I. Axisymmetric indentation of an electroelastic piezoelectric half-space with functionally graded piezoelectric coating by a circular punch. Acta Mechanica, 230(4), 1289–1302 (2019)
VASILIEV, A. S. Penetration of a spherical conductive punch into a piezoelectric half-space with a functionally graded coating. International Journal of Engineering Science, 142, 230–241 (2019)
ZHANG, X., LIU, J., SHEN, H., and WANG, Y. Elastic response of coating materials in thermoelasticity: indented by a hot punch. Journal of Thermal Stresses, 42(4), 475–489 (2019)
LIU, J., KE, L. L., WANG, Y. S., YANG, J., and ALAM, F. Thermoelastic frictional contact of functionally graded materials with arbitrarily varying properties. International Journal of Mechanical Sciences, 63(1), 86–98 (2012)
ZHOU, Y. T. and LEE, K. Y. Thermo-electro-mechanical contact behavior of a finite piezoelectric layer under a sliding punch with frictional heat generation. Journal of the Mechanics and Physics of Solids, 59(5), 1037–1061 (2011)
ZHOU, Y. T., ZHANG, C., ZHONG, Z., and WANG, L. Transient thermo-electro-elastic contact analysis of a sliding punch acting on a functionally graded piezoelectric strip under non-Fourier heat conduction. European Journal of Mechanics A/Solids, 73, 90–100 (2019)
ZHOU, Y. T., TIAN, X. J., and LI, F. J. On coupling contact analysis of thermoelectric materials. Applied Mathematical Modelling, 89, 1459–1474 (2021)
TIAN, X. J., ZHOU, Y. T., GUAN, X. F., WANG, L. H., and DING, S. H. The frictional contact problem of a rigid punch sliding over thermoelectric materials. International Journal of Solids and Structures, 200–201(C), 145–157 (2020)
ZHOU, Y. T. and LEE, K. Y. Thermal response of a partially insulated interface crack in a graded coating-substrate structure under thermo-mechanical disturbance: energy release and density. Theoretical and Applied Fracture Mechanics, 56(1), 22–33 (2011)
ZHOU, Y. T. and LEE, K. Y. Thermo-electro-mechanical contact behavior of a finite piezoelectric layer under a sliding punch with frictional heat generation. Journal of the Mechanics and Physics of Solids, 59(5), 1037–1061 (2011)
ZHOU, Y. T., LEE, K. Y., JANG, Y. H., and LI, J. The multiple fields created by two perfectly-conducting punches on piezoelectric/piezomagnetic materials with anisotropy. Journal of Applied Mathematics and Mechanics, 97(8), 946–960 (2017)
WANG, B. L. and CUI, Y. J. Transient interlaminar thermal stress in multi-layered thermoelectric materials. Applied Thermal Engineering, 119, 207–214 (2017)
GAO, J. L., DU, Q. G., ZHANG, X. D., and JIANG, X. Q. Thermal stress analysis and structure parameter selection for a Bi2Te3-based thermoelectric module. Journal of Electronic Materials, 40(5), 884–888 (2011)
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (Nos. 11972257, 11832014, 11762016, and 11472193) and the Fundamental Research Funds for the Central Universities (No. 22120180223)
Rights and permissions
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Tian, X., Zhou, Y., Wang, L. et al. Surface contact behavior of functionally graded thermoelectric materials indented by a conducting punch. Appl. Math. Mech.-Engl. Ed. 42, 649–664 (2021). https://doi.org/10.1007/s10483-021-2732-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10483-021-2732-8
Key words
- thermoelectric material
- functionally graded property
- conducting punch
- conjugate complex root
- energy flux
- contact pressure