Abstract
The elastic-plastic stress distribution and the elastic-plastic boundary configuration near a crack surface region are significant but hard to obtain by means of the conventional analysis. A crack line analysis method is developed in this paper by considering the crack surface as an extension of the crack line. The stresses in the plastic zone, the length, and the unit normal vector of the elastic-plastic boundary near a crack surface region are obtained for an antiplane crack in an elastic-perfectly plastic solid. The usual small scale yielding assumptions are not needed in the analysis.
Similar content being viewed by others
References
Achenbach, J. D. and Li, Z. L. Plane stress crack line fields for crack growth in an elastic-perfectly plastic material. Engineering Fracture Mechanics 20(3), 534–544 (1984)
Guo, Q. X. and Li, K. R. Plastic deformation ahead of a plane stress tensile crack growth in an elastic-perfectly plastic solid. Engineering Fracture Mechanics 28(2), 139–146 (1987)
Yi, Z. J. The new and analytical solution for model III crack in an elastic-perfectly plastic material. Engineering Fracture Mechanics 42(5), 833–840 (1992)
Yi, Z. J. The most recent solutions of near crack line fields for mode III cracks. Engineering Fracture Mechanics 47(1), 147–155 (1994)
Yi, Z. J., Wang, S. J., and Wu, H. L. Precise elastic-plastic analysis of crack line field for mode II plane stain crack. International Journal of Fracture 80(4), 353–363 (1996)
Yi, Z. J., Wang, S. J., and Wang, X. J. Precise solutions of elastic-plastic crack line fields for cracked plate loaded by antiplane point forces. Engineering Fracture Mechanics 57(1), 75–83 (1997)
Yi, Z. J., Zhao, C. H., Yang, Q. G., Peng, K., and Huang, Z. M. General forms of elastic-plastic matching equations for mode-III cracks near crack line. Applied Mathematics and Mechanics (English Edition) 30(5), 549–559 (2009) DOI 10.1007/s10483-009-0502-2
Wu, C. P. and Wang, C. Near crack line elastic-plastic analysis for a crack loaded by antiplane point forces. Applied Mathematics and Mechanics (English Edition) 17(12), 1121–1126 (1996) DOI 10.1007/BF02498698
Wang, C. and Zhang, L. K. Near crack line elastic-plastic analysis for a finite plate loaded by two pairs of antiplane point forces. Applied Mathematics and Mechanics (English Edition) 19(6), 547–553 (1998) DOI 10.1007/BF02453410
Wang, C. and Wu, C. P. Elastic plastic analytical solutions for an eccentric crack loaded by two pairs of antiplane point forces. Applied Mathematics and Mechanics (English Edition) 24(7), 782–790 (2003) DOI 10.1007/BF02437810
Wang, J. H. and Zhou, X. P. Near crack line elastic-plastic analysis for an infinite plate loaded by two pairs of point tensile forces. Mechanics Research Communication 31(4), 415–420 (2004)
Chitaley, A. D. and McClintock, F. A. Elastic-plastic mechanics of steady crack growth under antiplane shear. Journal of the Mechanics and Physics of Solids 19(3), 147–163 (1971)
Author information
Authors and Affiliations
Corresponding author
Additional information
Contributed by Zhi-jian YI
Project supported by the National Natural Science Foundation of China (No. 10672196)
Rights and permissions
About this article
Cite this article
Yi, Zj., Gu, Jy., He, Xb. et al. Elastic-plastic analysis of antiplane crack near crack surface region. Appl. Math. Mech.-Engl. Ed. 31, 895–902 (2010). https://doi.org/10.1007/s10483-010-1323-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10483-010-1323-x