Abstract
The improved near crack line analysis method was used to investigate an eccentric cracked plate loaded by two pairs of anti-plane point forces at the crack surface in an elastic-perfectly plastic solid. The analytical solutions of the elastic-plastic stress fields and displacements near the crack line have been found without the assumptions of the small scale yielding. The law that the length of the plastic zone along the crack line is varied with an external loads and the bearing capacity of an eccentric cracked plate are obtained.
Similar content being viewed by others
References
Achenbach J D, Li Z L. Plane stress crack line fields for crack growth in an elastic-perfectly plastic material[J].Engineering Fracture Mechanics, 1980,20(3):534–544.
GUO Quan-xin, LI Ke-rong. Plastic deformation ahead of a plane stress tensile crack growth in an elastic-perfectly plastic solid[J].Engineering Fracture Mechanics, 1987,28(2):139–146.
YI Zhi-jian. The precise and new analysis for a mode III growing crack in an elastic-perfectly plastic solid[J].Applied Mathematics and Mechanics (English Edition), 1993,14(4):345–352.
YI Zhi-jian. The most recent solutions of near crack line field for mode III cracks[J].Engineering Fracture Mechanics, 1994,47(1):147–155.
WU Cheng-ping, WANG Cheng. Near crack line elastic-plastic analysis for a crack loaded by antiplane point forces[J].Applied Mathematics and Mechanics (English Edition), 1996,17(12):1121–1126.
WANG Cheng, ZHANG Lu-kun. Near crack line elastic-plastic analysis for a finite plate loaded by two pairs of anti-plane point forces[J].Applied Mathematics and Mechanics (English Edition), 1998,19(6):547–554.
WANG Cheng. Elastic-plastic analysis of a finite plate with central crack loaded by a pair of eccentric forces [J].Engineering Mechanics, 2000,17(4):86–93. (in Chinese)
Author information
Authors and Affiliations
Additional information
Contributed by WU Cheng-ping
Biography: WANG Cheng (1962≈), Professor, Doctor (E-mail: wch62@cquc.edu.cn)
Rights and permissions
About this article
Cite this article
Cheng, W., Cheng-ping, W. Elastic-plastic analytical solutions for an eccentric crack loaded by two pairs of anti-plane point forces. Appl Math Mech 24, 782–790 (2003). https://doi.org/10.1007/BF02437810
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02437810
Key words
- eccentric cracked plate
- near crack line analysis
- two pairs of anti-plane point forces
- elastic-plastic analytical solutions