Abstract
Natural and synthetic adsorbents are used to remove contaminants from polluted waters. In particular, polymer-based aerogels are promising but their adsorption capacity and dimensional stability should be improved. Here we propose a new design strategy to prepare a dual-network aerogel, consisting of physical cross-linked agar and Ca2+ cross-linked sodium alginate as the first and second networks, respectively. After introducing cross-linked sodium alginate into the agar matrix, the morphology of the agar aerogel transformed from a distinct layered structure to a co-continuous network. The swelling degree ratio of the agar aerogel is reduced, and the dimensional stability was improved by introducing ion cross-linked sodium alginate into the agar matrix. The aerogels were used as adsorbents to remove methylene blue from aqueous solutions. The adsorption capacity of the agar aerogel was remarkably improved by adding sodium alginate due to the increase in electrostatic attraction and adsorption site.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Belhouchat N, Zaghouane-Boudiaf H, Viseras C (2017) Removal of anionic and cationic dyes from aqueous solution with activated organobentonite/sodium alginate encapsulated beads. Appl Clay Sci 135:9–15. https://doi.org/10.1016/j.clay.2016.08.031
Chen L, Li Y, Du Q, Wang Z, Xia Y, Yedinak E, Lou J, Ci L (2017) High performance agar/graphene oxide composite aerogel for methylene blue removal. Carbohydr Polym 155:345–353. https://doi.org/10.1016/j.carbpol.2016.08.047
Dai L, Zhu W, He L, Tan F, Zhu N, Zhou Q, He M, Hu G (2018) Calcium-rich biochar from crab shell: an unexpected super adsorbent for dye removal. Bioresour Technol 267:510–516. https://doi.org/10.1016/j.biortech.2018.07.090
Hu Z, Omer A, Ouyang X, Yu D (2018) Fabrication of carboxylated cellulose nanocrystal/sodium alginate hydrogel beads for adsorption of Pb(II) from aqueous solution. Int J Biol Macromol 108:149–157. https://doi.org/10.1016/j.ijbiomac.2017.11.171
Karimifard S and Moghaddam MR (2018) Application of response surface methodology in physicochemical removal of dyes from wastewater: a critical review. Sci Total Environ 640–641:772–797. https://doi.org/10.1016/j.scitotenv.2018.05.355
Khan S, Masood S, Siddiqui K, Alam M, Zafar F, Haque Q, Nishat N (2018) Utilization of renewable waste material for the sustainable development of thermally stable and biologically active aliphatic amine modified Cardanol (phenolic lipid) - Formaldehyde free standing films. J Clean Prod 196:1644–1656. https://doi.org/10.1016/j.jclepro.2018.06.081
Kumar M, Vijayakumar G, Tamilarasan R (2019) Synthesis, characterization and experimental studies of nano Zn–Al–Fe3O4 blended alginate/Ca beads for the adsorption of Rhodamin B. J Polym Environ 27(1):106–117. https://doi.org/10.1007/s10924-018-1318-0
Lai KC, Hiew BYZ, Lee LY, Gan S, Thangalazhy-Gopakumar S, Chiu WS and Khiew PS (2019) Ice-templated graphene oxide/chitosan aerogel as an effective adsorbent for sequestration of metanil yellow dye. Bioresour Technol 274:134–144. https://doi.org/10.1016/j.biortech.2018.11.048
Li Y, Guo C, Shi R, Zhang H, Gong L, Dai L (2019) Chitosan/nanofibrillated cellulose aerogel with highly oriented microchannel structure for rapid removal of Pb (II) ions from aqueous solution. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2019.115048
Lu T, Xiang T, Huang X, Li C, Zhao W, Zhang Q, Zhao C (2015) Post-crosslinking towards stimuli-responsive sodium alginate beads for the removal of dye and heavy metals. Carbohydr Polym 133:587–595. https://doi.org/10.1016/j.carbpol.2015.07.048
Mahamadi C, Mawere E (2014) High adsorption of dyes by water hyacinth fixed on alginate. Environ Chem Lett 12:313–320. https://doi.org/10.1007/s10311-013-0445-z
Ren H, Gao Z, Wu D, Jiang J, Sun Y, Luo C (2016) Efficient Pb(II) removal using sodium alginate-carboxymethyl cellulose gel beads: preparation, characterization, and adsorption mechanism. Carbohydr Polym 137:402–409. https://doi.org/10.1016/j.carbpol.2015.11.002
Shankar S, Teng X, Rhim J (2014) Properties and characterization of agar/CuNP bionanocomposite films prepared with different copper salts and reducing agents. Carbohydr Polym 114:484–492. https://doi.org/10.1016/j.carbpol.2014.08.036
Shao Z, Huang X, Yang F, Zhao W, Zhou X, Zhao C (2018) Engineering sodium alginate-based cross-linked beads with high removal ability of toxic metal ions and cationic. Carbohydr Polym 187:85–93. https://doi.org/10.1016/j.carbpol.2018.01.092
Sultan M (2017) Polyurethane for removal of organic dyes from textile wastewater. Environ Chem Lett 15:347–366. https://doi.org/10.1007/s10311-016-0597-8
Tan L, Yu C, Wang M, Zhang S, Sun J, Dong S, Sun J (2019) Synergistic effect of adsorption and photocatalysis of 3D g-C3N4-agar hybrid aerogels. Appl Surf Sci 467–468:286–292. https://doi.org/10.1016/j.apsusc.2018.10.067
Acknowledgements
The authors would like to thank the funding of the Science and Technology Support Project of Natural Science Foundation of the Gansu Province (No. 1506RJZA068).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Huang, D., Quan, Q., Zheng, Y. et al. Dual-network design to enhance the properties of agar aerogel adsorbent by incorporating in situ ion cross-linked alginate. Environ Chem Lett 18, 251–255 (2020). https://doi.org/10.1007/s10311-019-00932-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10311-019-00932-7