Abstract
Hydrogen generation from municipal solid waste incineration fly ash was investigated to understand the influences of contacting method, kinds of contact solution, liquid to solid ratio, and particle size distribution of materials. Redox properties of materials and hydrogen generation were also studied. The largest quantity of gas generated in contact with water was 29.1 ml/g-ash, most of which was hydrogen. Fluidized bed fly ash generated more gas than stoker fly ash. In order to calculate the hydrogen generation potential (the maximum quantity of gas generated in contact with water), a novel system using a Y-shaped test tube and NaOH was utilized. This method gives values which are related to the quantity of generated gas in contact with water. A relationship between the aluminum content and hydrogen generation potential was observed, especially for fluidized bed fly ash. The reducing potential of fluidized bed fly ash was higher than that of stoker fly ash. Only fluidized bed fly ash showed a positive correlation between aluminum content and reducing potential, and between reducing potential and hydrogen generation potential. These results suggest that fluidized bed fly ash contains more Al0 than stoker fly ash.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: September 11, 1998 / Accepted: March 19, 1999
Rights and permissions
About this article
Cite this article
Mizutani, S., Sakai, Si. & Takatsuki, H. Investigation of hydrogen generation from municipal solid waste incineration fly ash. J Mater Cycles Waste Manag 2, 16–23 (2000). https://doi.org/10.1007/s10163-999-0016-3
Issue Date:
DOI: https://doi.org/10.1007/s10163-999-0016-3