Skip to main content
SpringerLink
Log in

A sustainable utilization of waste foundry sand in soil stabilization: a review

  • Review Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Soil stabilization involves various techniques and processes to improve the properties of soil especially expansive soils as it is considered troublesome for civil engineering and other field works due to its diminished strength shrinkage and swelling properties. Therefore, it becomes imperative to inculcate certain traditional or non-traditional stabilizers to elevate the geotechnical properties of soil. Waste foundry sand is one such non-traditional stabilizer that has been utilized in the soil for the improvement of soil properties. This paper presents an overall review of the past studies carried out on soil stabilization using waste foundry sand. The results reveal Atterberg’s limits, i.e., liquid limit; plastic limit decreases with the increase in the percentage of waste foundry sand in the mix. Specifically, the liquid limit undergoes a reduction within the range of 25–30%, while the plastic limit experiences a decrease within the range of 16–18% when the optimum percentage of waste foundry sand (20–30%) is added to expansive soils. Further, there is an increase of around 25–42% in unconfined compressive strength and around 50–80% in California bearing ratio values on adding optimum percentage of WFS. Therefore, a WFS content of 20–30% is recommended as the optimum choice for soil stabilization in clayey soils.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  • Abichou T, Benson CH, Edil TB (2000) Foundry green sands as hydraulic barriers: laboratory study. J Geotechn Geoenviron Eng 126(12):1174–1183

    Article  CAS  Google Scholar 

  • Ahmad J, Aslam F, Zaid O, Alyousef R, Alabduljabbar H (2021) Mechanical and durability characteristics of sustainable concrete modified with partial substitution of waste foundry sand. Struct Concr 22:2775–2790

    Article  Google Scholar 

  • Ahmad J, Zhou Z, Martínez-García R, Vatin NI, de Prado-Gil J, El-Shorbagy MA (2022) Waste foundry sand in concrete production instead of natural river sand: a review. Materials 15(7):2365

    Article  CAS  Google Scholar 

  • Altaf S, Singh K, Sharma A (2023) Sustainable utilization of waste foundry sand and sodium chloride in soil stabilization. J Min Environ 14(3):897–908

    Google Scholar 

  • Amakye SY, Abbey SJ (2021) Understanding the performance of expansive subgrade materials treated with non-traditional stabilizers: a review. Clean Eng Technol 4:100159

    Article  Google Scholar 

  • Anand D, Sharma RK, Sharma A (2021) Improving swelling and strength behavior of black cotton soil using lime and quarry dust. In Sustainable development through engineering innovations (pp. 601–609). Springer, Singapore.

  • Aneke FI, Awuzie B (2018) Conversion of industrial wastes into marginal construction materials. Acta Structilia 25(2):119–137

    Article  Google Scholar 

  • Aneke FI, Shabangu C (2021) Green-efficient masonry bricks produced from scrap plastic waste and foundry sand. Case Stud Constr Mater 14:e00515

    Google Scholar 

  • Anupam AK, Kumar P, Ransinchung GD (2013) Use of various agricultural and industrial waste materials in road construction. Procedia Soc Behav Sci 104:264–273

    Article  Google Scholar 

  • Başar HM, Aksoy ND (2012) Recovery applications of waste foundry sand. J Eng Nat Sci 30:205–224

    Google Scholar 

  • Bhardwaj A, Sharma RK (2020) Effect of industrial wastes and lime on strength characteristics of clayey soil. J Eng Des Technol 18(6):1749–1772

    Google Scholar 

  • Bhardwaj A, Sharma RK, Sharma A (2021) Stabilization of clayey soil using waste foundry sand and molasses. In Sustainable development through engineering innovations (pp. 641–649). Springer, Singapore.

  • Bilal H, Yaqub M, Rehman SKU, Abid M, Alyousef R, Alabduljabbar H, Aslam F (2019) Performance of foundry sand concrete under ambient and elevated temperatures. Materials 12:2645

    Article  CAS  Google Scholar 

  • Bozbey I, Garaisayev S (2010) Effects of soil pulverization quality on lime stabilization of an expansive clay. Environ Earth Sci 60(6):1137–1151

    Article  CAS  Google Scholar 

  • Dayton EA, Whitacre SD, Dungan RS, Basta NT (2010) Characterization of physical and chemical properties of spent foundry sands pertinent to beneficial use in manufactured soils. Plant Soil 329(1):27–33

    Article  CAS  Google Scholar 

  • Deng A, Tikalsky PJ (2008) Geotechnical and leaching properties of flowable fill incorporating waste foundry sand. Waste Manage 28(11):2161–2170

    Article  CAS  Google Scholar 

  • Dogan-Saglamtimur N (2018) Waste foundry sand usage for building material production: a first geopolymer record in material reuse. Adv Civ Eng 2018:1927135

    Google Scholar 

  • Dungan RS, Kukier U, Lee B (2006) Blending foundry sands with soil: effect on dehydrogenase activity. Sci Total Environ 357(1–3):221–230

    Article  CAS  Google Scholar 

  • Eko RM, Riskowski G (2001) A procedure for processing mixtures of soil, cement, and sugar cane bagasse

  • Fox PJ, Mast DG (1998) Geotechnical performance of highway embankment constructed using waste foundry sand. FHWA/IN/JTRP-98/18. Joint Transportation Research Program. Indiana Department of Transportation and Purdue University. West Lafayette. Indiana, United States

  • Gazi A (2018) Utilization of waste foundry sand as highway material (Master's thesis, Fen BilimleriEnstitüsü)

  • Goodhue MJ, Edil TB, Benson CH (2001) Interaction of foundry sands with geosynthetic journal of geotechnical and geoenvironmental engineering. ASCE 127:353–362

    CAS  Google Scholar 

  • Guney Y, Aydilek AH, Demirkan MM (2006) Geoenvironmental behavior of foundry sand amended mixtures for highway sub bases. Waste Manage 26(9):932–945

    Article  Google Scholar 

  • Guney Y, Sari YD, Yalcin M, Tuncan A, Donmez S (2010) Re-usage of waste foundry sand in high-strength concrete. Waste Manag 30:1705–1713

    Article  Google Scholar 

  • Harichane K, Ghrici M, Kenai S, Grine K (2011) Use of natural pozzolana and lime for stabilization of cohesive soils. Geotech Geol Eng 29:759–769

    Article  Google Scholar 

  • Heidemann M, Nierwinski HP, Hastenpflug D, Barra BS, Perez YG (2021) Geotechnical behavior of compacted waste foundry sand. Constr Build Mater 277:122267

    Article  Google Scholar 

  • Ikeagwuani CC, Nwonu DC (2019) Emerging trends in expansive soil stabilization: a review. J Rock Mech Geotech Eng 11(2):423–440

    Article  Google Scholar 

  • Iqbal MF, Liu QF, Azim I (2019) Experimental study on the utilization of waste foundry sand as embankment and structural fill. In IOP conference series: materials science and engineering (Vol. 474, No. 1, p. 012042). IOP Publishing.

  • Javed S, Lovell CW (1994) (1994) Uses of waste foundry sands in civil engineering. Transp Res Rec 1486:109–113

    Google Scholar 

  • Johnson CK (1981) Phenols in foundry waste sand

  • Kaur G, Siddique R, Rajor A (2012) Properties of concrete containing fungal treated waste foundry sand. Constr Build Mater 29:82–87

    Article  Google Scholar 

  • Kleven JR, Edil TB, Benson CH (2000) Evaluation of excess foundry system sands for use as sub-base material. Transp Res Board 1714:40–48

    Article  Google Scholar 

  • Klinsky LMG, Fabbri GTP, Santos Bardini VSD (2016) Reuse of waste foundry sand mixed with lateritic clayey soils in pavement bases and sub-bases courses. 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials. Springer, Dordrecht, pp 569–582

    Chapter  Google Scholar 

  • Kolias S, Kasselouri-Rigopoulou V, Karahalios A (2005) Stabilization of clayey soils with high calcium fly ash and cement. Cement Concr Compos 27(2):301–313

    Article  CAS  Google Scholar 

  • Kumar S, Prajapati DR, Satsangi PS (2011) Design for Six Sigma to optimise the process parameters of a foundry. Int J Prod Qual Manag 8(3):333–355

    Google Scholar 

  • Kumar A, Kumari S, Sharma RK (2016) Influence of use of additives on engineering properties of clayey soil. Proceedings of National conference: Civil Engineering Conference-Innovation for Sustainability (CEC-2016).

  • Manoharan T, Laksmanan D, Mylsamy K, Sivakumar P, Sircar A (2018) Engineering properties of concrete with partial utilization of used foundry sand. Waste Manage 71:454–460

    Article  CAS  Google Scholar 

  • McIntyre SW, Rudman KB, Baillod CR, Sandell PR, Stillwell B (1992) Beneficiation and reuse of foundry sand residuals: a preliminary report transactions of the American Foundry men’s Society. 100:201-208

  • Miguel RE, Ippolito JA, Leytem AB, Porta AA, Noriega RBB, Dungan RS (2012) Analysis of total metals in waste molding and core sands from ferrous and non-ferrous foundries. J Environ Manage 110:77–81

    Article  CAS  Google Scholar 

  • Mishra B (2014) A Study on characteristics of subgrade soil by use of foundry sand and Iron turnings. Int J Sci Res (IJSR), ISSN (Online) 2319–7064

  • Moses G, Afolayan JO (2011) Compacted foundry sand treated with cement kiln dust as hydraulic barrier material. Electron J Geotech Eng 16:337–355

    CAS  Google Scholar 

  • Moses G, Oriola FOP, Afolayan JO (2013) The impact of compactive effort on the long-term hydraulic conductivity of compacted foundry sand treated with bagasse ash and permeated with municipal solid waste landfill leachate. Front Geotech Eng 2(1):7

    Google Scholar 

  • Naik TR, Patel VM, Parikh DM, Tharaniyil MP (1994) Utilization of used foundry sand, Department of Civil Engineering & Mechanics. University of Wisconsin – Milwaukee. United States.

  • Noronha Marques E, Bergmann CP, Masuero AB (2023) Analysis of the technical feasibility of sustainable concrete production using waste foundry sand as a fine aggregate. ACS Omega 8(49):46406–46413

    Article  CAS  Google Scholar 

  • Nuryati S, Nurrahman I, Yulius E, Paryati N, Gunarti ASS, Darma E (2023) The utilization of marble and cement powder as material for highway subgrade soil stabilization. In AIP Conference Proceedings (Vol. 2706, No. 1). AIP Publishing.

  • Osinubi KJ, Moses G, Liman AS (2015) The influence of compactive effort on compacted lateritic soil treated with cement kiln dust as hydraulic barrier material. Geotech Geol Eng 33:523–535

    Article  Google Scholar 

  • Partridge BK, Alleman JE (1998) Field demonstration of highway embankment constructed using waste foundry sand. FHWA/IN/JTRP-98/8.Joint Transportation Research Program. Indiana Department of Transportation and Purdue University. West Lafayette. Indiana. United States

  • Pasetto M, Baldo N (2015) Experimental analysis of hydraulically bound mixtures made with waste foundry sand and steel slag. Mater Struct 48(8):2489–2503

    Article  CAS  Google Scholar 

  • Pooni J, Robert D, Giustozzi F, Gunasekara C, Setunge S, Venkatesan S (2022) Hydraulic characteristics of stabilised expansive subgrade soils in road pavements. Int J Pavement Eng 23(9):3129–3146

    Article  CAS  Google Scholar 

  • Prabhu GG, Hyun JH, Kim YY (2014) Effects of foundry sand as a fine aggregate in concrete production. Constr Build Mater 70:514–521

    Article  Google Scholar 

  • Prasad VD, Prakash EL, Abishek M, Dev KU, Kiran CKS (2018) Study on concrete containing waste foundry sand, fly ash and polypropylene fibre using Taguchi method. Mater Today Proc 5:23964–23973

    Article  CAS  Google Scholar 

  • Reshma TV, Manjunatha M, Sankalpasri S, Tanu HM (2021) Effect of waste foundry sand and fly ash on mechanical and fresh properties of concrete. Mater Today: Proc 47:3625–3632

    CAS  Google Scholar 

  • Sharma RK, Hymavathi J (2016) Effect of fly ash, construction demolition waste and lime on geotechnical characteristics of a clayey soil: a comparative study. Environ Earth Sci 75(5):1–11

    Article  Google Scholar 

  • Sharma A, Sharma RK (2019) Effect of addition of construction–demolition waste on strength characteristics of high plastic clays. Innov Infrastruct Solutions 4(1):1–11

    Article  CAS  Google Scholar 

  • Sharma A, Sharma RK (2020) Strength and drainage characteristics of poor soils stabilized with construction demolition waste. Geotech Geol Eng 38(5):4753–4760

    Article  Google Scholar 

  • Sharma A, Sharma RK (2021a) An experimental study on uplift behaviour of granular anchor pile in stabilized expansive soil. Int J Geotech Eng 15(8):950–963

    Article  CAS  Google Scholar 

  • Sharma A, Sharma RK (2021b) Sub-grade characteristics of soil stabilized with agricultural waste, constructional waste, and lime. Bull Eng Geol Env 80(3):2473–2484

    Article  Google Scholar 

  • Siddique R, Singh G (2011) Utilization of waste foundry sand (WFS) in concrete manufacturing. Resour Conserv Recycl 55(11):885892

    Article  Google Scholar 

  • Siddique R, Kaur G, Rajor A (2010) Waste foundry sand and its leachate characteristics. Resour Conserv Recycl 54(12):1027–1036

    Article  Google Scholar 

  • Siddique R (2007) Waste materials and by-products in concrete. Springer Science & Business Media

  • Smarzewski P (2020) Mechanical properties of ultra-high-performance concrete with partial utilization of waste foundry sand. Buildings 10(1):11

    Article  Google Scholar 

  • Sujjavanidi S, Duangchan A (2004) Pozzolanic reactivity and water requirement of bagasse ash. In Proc. In the 2nd Concrete National Conference (pp. 27–28)

  • Taye B, Araya AA (2015) Stabilization of expansive clay soil with sugar cane molasses and cement. Proceedings of the 2nd International Conference on Transportation in Africa (ICTA2015) Majestic Five Hotel, Palapye, Botswana

  • Thiruvenkitam M, Pandian S, Santra M, Subramanian D (2020) Use of waste foundry sand as a partial replacement to produce green concrete: mechanical properties, durability attributes and its economical assessment. Environ Technol Innov 19:101022

    Article  Google Scholar 

  • Tittarelli F (2018) Waste foundry sand. In Waste and Supplementary Cementitious Materials in Concrete (pp. 121–147). Woodhead Publishing

  • Winkler ES, Bolshakov AA (2000) Characterization of foundry sand waste. Chelsea Center for Recycling and Economic Development University of Massachusetts at Lowell. United States

  • Yadav AP, Kumar EN (2019) A comparative study of waste foundry sand and marble dust for stabilization of subgrade soil. Int J Res Appl Sci Eng Technol

  • Yazoghli-Marzouk O, Vulcano-Greullet N, Cantegrit L, Friteyre L, Jullien A (2014) Recycling foundry sand in road construction–field assessment. Constr Build Mater 61:69–78

    Article  Google Scholar 

  • Zhang Y, Sappinen T, Korkiala-Tanttu L, Vilenius M, Juuti E (2021) Investigations into stabilized waste foundry sand for applications in pavement structures. Resour Conserv Recycl 170:105585

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Civil Engineering Department, Chandigarh University, Mohali, Punjab, India

    Sehla Altaf, Abhishek Sharma & Kanwarpreet Singh

Authors
  1. Sehla Altaf
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Abhishek Sharma
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Kanwarpreet Singh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Abhishek Sharma.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Altaf, S., Sharma, A. & Singh, K. A sustainable utilization of waste foundry sand in soil stabilization: a review. Bull Eng Geol Environ 83, 143 (2024). https://doi.org/10.1007/s10064-024-03638-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10064-024-03638-5

Keywords

Search

Navigation