Abstract
We propose a grating interferometer for step-profile altitude difference measurement. There are two main characteristics in this interferometer. The first is that the intensity distribution of the interference pattern is independent of the wavelength of the laser-diode used. No change of the intensity distribution occurs when the wavelength fluctuates. The second is that the measuring range is much larger than the wavelength of the light source because the spatial period of the grating is much larger than the wavelength. Sinusoidal phase modulating interferometry is easily applied to detect the phase variation of the interference pattern by vibrating the grating sinusoidally. The thickness of a 3.5-inch disk is measured with an accuracy of less than 0.5 μm.
Similar content being viewed by others
References
C. Polhemus: Appl. Opt. 12 (1973) 2071.
K. Creath: Appl. Opt. 26 (1987) 2810.
P. de Groot and S. Kishner: Appl. Opt. 30 (1991) 4026.
A. J. den Boef: Appl. Opt. 27 (1988) 306.
V. Gusmeroli and M. Martinelli: Opt. Commun. 94 (1992) 309.
R. Onodera and Y. Ishii: Appl. Opt. 34 (1995) 4740.
O. Sasaki, K. Takahashi and T. Suzuki: Opt. Eng. 29 (1991) 1511.
O. Sasaki, H. Sasazaki and T. Suzuki: Appl. Opt. 30 (1991) 4040.
O. Sasaki and H. Okazaki: Appl. Opt. 24 (1985) 2124.
O. Sasaki and H. Okazaki: Appl. Opt. 25 (1986) 3137.
O. Sasaki and H. Okazaki: Appl. Opt. 25 (1986) 3152.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Xu, Y., Sasaki, O. & Suzuki, T. Grating Interferometer Using ± 1st Order Beams for Step-Profile Altitude Difference Measurement. OPT REV 10, 514–517 (2003). https://doi.org/10.1007/s10043-003-0514-9
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10043-003-0514-9