Avoid common mistakes on your manuscript.
Electrochemistry plays a key role in many fields of science and technology that are closely related to a sustainable future of humankind. Photovoltaics, batteries, and fuel cells play important roles in the everyday life of many people. Rechargeable batteries are taken for granted in electronic devices such as laptops and mobile phones. Electrochemical sensors are less exposed to the general public, but are still essential for human health and well-being. There is no doubt that electrochemical glucose biosensors have dramatically improved the quality of life for hundreds of millions of diabetics on this planet. In hospitals, electrochemical sensors are part of automated clinical analyzers for determination of electrolytes and blood gases. Potentiometric pH sensors are common tools in chemistry laboratories. Miniaturized electronics and wireless signal transmission enable more distributed and decentralized electrochemical analysis. An exciting example is the on-going development of wearable electrochemical sensors for non-invasive monitoring of biomarkers in sweat or interstitial fluid.
Last year (2019), over 500 review articles were published on electrochemical sensors (Fig. 1). This confirms a high scientific research activity in this field. A plethora of electrochemical sensing concepts are based on nanomaterials and nanostructured sensor surfaces. This is not surprising when considering the unlimited variability offered by multi-component nanomaterials of various shapes, sizes, chemical compositions, and surface functional groups. However, when utilizing multi-component nanostructures of excessive complexity, there is a risk that subtle variations in sensor production will compromise the repeatability and reproducibility of the analytical information provided by the final sensor. Furthermore, specific requirements with regard to the intended application must be considered. Quite often there is a gap between a novel sensing concept and an intended real-world application. For example, a non-enzymatic glucose sensor showing excellent sensitivity to glucose in 0.1 M NaOH may not be ideal for wearable glucose monitoring under physiological conditions.
Despite continuous progress for several decades, current research in the field of electrochemical sensors is facing scientific challenges related to emerging applications, such as wearable sensors for personal health monitoring and autonomous sensors for in situ environmental analysis. Similarly, very few electrochemical sensors are durable enough to be applied for on-line or in-line process analysis. Therefore, future research should focus on a more robust design of electrochemical sensors and biosensors to minimize the need for calibration and to enable long-term continuous monitoring.
Disposable electrochemical sensors represent an alternative approach. Such sensors only have to last for a single measurement, but instead they have to be very cheap and fit for mass production. Paper-based microfluidic analytical devices (μPADs) are excellent examples of disposable chemical sensors where a liquid sample is transported by capillary forces to a detection zone for visual (optical) or electrochemical detection (ePADs). When considering the successful commercialization of disposable glucose sensor strips, the development of ePADs should be a prospective area of electrochemical research, when aiming for single-use sensors.
An important future task of electrochemical research will be to bridge the gap between new electrochemical sensing concepts and real-world analytical applications. Successful completion of this task will enable various analytical measurement scenarios in the future where electrochemical sensors can be used to their full potential.
Funding
Open access funding provided by Abo Akademi University (ABO).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Bobacka, J. Electrochemical sensors for real-world applications. J Solid State Electrochem 24, 2039–2040 (2020). https://doi.org/10.1007/s10008-020-04700-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-020-04700-4