Skip to main content
Log in

Reflection and structural analyses of mirror-bright metal coatings

  • Original Paper
  • Published:
Journal of Solid State Electrochemistry Aims and scope Submit manuscript

Abstract

Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified polyglycol ether, PEG 6000 and 3-mercaptopropanesulfonate. The zinc coating was electrodeposited from a sulfate solution in the presence of a dextrin/salicylaldehyde mixture. They were examined by STM and X-ray diffraction analysis, and measurements of the reflection of light from their surfaces were taken. The mean sizes of atomically flat parts of these surfaces were estimated by the STM software measurements, using options for the determination of the autocovariance function and the power spectral density function. It was shown that the mean sizes of atomically flat parts of the copper coatings were several times greater than the mean size of atomically flat parts of the zinc coating. This difference probably leads to the difference in the maximum degrees of mirror reflection between copper and zinc coatings.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Nikolić ND, Rakočević Z, Popov KI (2001) J Electroanal Chem 514:56

    Article  Google Scholar 

  2. Nikolić ND, Rakočević Z, Popov KI (2001) J Serb Chem Soc 66:723

    Google Scholar 

  3. Nikolić ND, Rakočević Z, Đurović DR, Popov KI (2002) J Serb Chem Soc 67:437

    Google Scholar 

  4. Kiely JD, Bonneli DA (1997) J Vac Sci Technol B 15:1483

    Article  CAS  Google Scholar 

  5. Niwa M, Iwasaki H, Watanabe Y, Sumita I, Akutsu N, Akutsu Y (1992) Appl Surf Sci 60/61:39

  6. Eklund EA, Snyder EJ, Williams RS (1993) Surf Sci 285:157

    Article  CAS  Google Scholar 

  7. Mitchell MW, Bonnell DA (1990) J Mater Res 5:2244

    CAS  Google Scholar 

  8. Williams JM, Beebe TP (1993) J Phys Chem 97:6255

    CAS  Google Scholar 

  9. Dumas Ph, Bouffakhreddine B, Arma C, Vatel O, Andre E, Galindo R, Salvan F (1993) Europhys Lett 22:717

    CAS  Google Scholar 

  10. Talibuddin S, Runt JP (1994) J Appl Phys 76:5070

    Article  CAS  Google Scholar 

  11. Rakić AD, Đuričić AB, Elazar JM, Majewski ML (1998) Appl Optics 37:5271

    Google Scholar 

  12. Grdenić D (1987) Molekule i kristali. Školska knjiga, Zagreb (in Croatian)

  13. Sato R (1959) J Electrochem Soc 106:206

    CAS  Google Scholar 

  14. Finch GI, Quarrei AG, Wilman H (1935) Trans Faraday Soc 31:1051

    CAS  Google Scholar 

  15. Finch GI (1950) Elektrochem Z 54:457

    CAS  Google Scholar 

  16. Nielsen CB, Leisner P, Horsewell A (1998) J Appl Electrochem 28:141

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Ministry of Sciences, Technology and Development of Republic Serbia under research projects “Electrodeposition of metal powders at a constant at a periodically changing rate” (1806/2002) and “The surface science and thin films” (2018/2002).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to K. I. Popov.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Nikolić, N.D., Rakočević, Z. & Popov, K.I. Reflection and structural analyses of mirror-bright metal coatings. J Solid State Electrochem 8, 526–531 (2004). https://doi.org/10.1007/s10008-003-0467-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10008-003-0467-8

Keywords

Navigation