Abstract
Internal auditing is an important part of the ISO/IEC 17025:2017 standard. Clause 8.8 of the ISO/IEC 17025:2017 standard describes the requirements that the testing and calibration laboratories need to follow in the area of internal auditing. However, the standard does not describe which technique to use when conducting internal audits and the ISO 19011:2018 standard (Guidelines for Auditing Management Systems) only mentions the audit methods that can be used by an auditor, lacking practical aspects. Based on the internal auditing technique used, non-conformities that are present may or may not be detected. For example, technical competency of an analyst cannot be completely ascertained by just thoroughly reviewing the related documents such as training records. Therefore, it is important that internal auditors utilize appropriate techniques during an internal audit for it to be an effective one. Different internal auditors use different techniques during the audit. The commonest way internal auditors use is to develop a checklist (usually the one used by the accreditation body to which the laboratory is affiliated) for auditing the compliance to the ISO/IEC 17025:2017 management system and witnessing the technical competence of the technical staff. The aim of this article is to share the techniques utilized by the author during the internal auditing of ISO/IEC 17025:2017 accredited testing laboratories.
References
Krismastuti FSH, Habibie MH (2022) Complying with the resource requirements of ISO/IEC 17025:2017 in Indonesian calibration and testing laboratories: current challenges and future directions. Accredit Qual Assur 27:359–367. https://doi.org/10.1007/s00769-022-01523-w
International Standard Organization/ International Electro Technical Corporation (2017) ISO/IEC 17025 : 2017 - General requirements for the competence of testing and calibration laboratories
International Standard Organization (2018) ISO 19011 : 2018-Guidelines for auditing management systems.
European Federation of National Association of Measurement, Testing and Analytical Laboratories (2017) EUROLAB ‘Cook Book’—Doc No. 9.0. https://drive.google.com/file/d/1PdF8 bUGUF_CFhaPbCkGFMPeqSj0SNtZU/view
Standards Store (2017) ISO/IEC 17025 : 2017 Internal Auditor Training Student Manual
de Jesus LN, Penteado RB, Malheiros FC, Castillo LAM, de Almeida LFM (2023) The conception and initial years of a quality management system based on ISO/IEC 17025: an action research. Accred Qual Assur 28:147–157. https://doi.org/10.1007/s00769-023-01539-w
UNICHIM. 179/1 (2001) Guidelines for the Validation of Analytical Methods in Chemical Laboratories - Evaluation of the Precision (Strict Repeatability) of an Analytical Method Performed in a Single Laboratory by a Single Operator on a Single Instrument in a Short Interval of Time
Kallner A, Theodorsson E (2020) Repeatability imprecision from analysis of duplicates of patient samples and control materials. Scand J Clin Lab. https://doi.org/10.1080/00365513.2019.1710243
Synek V, Kříženecká S (2023) Estimation of uncertainty from duplicate measurements: new quantification procedure in the case of concentration-dependent precision. Accredit Qual Assu. 28:279–298. https://doi.org/10.1007/s00769-023-01556-9
Author information
Authors and Affiliations
Contributions
The author wrote and reviewed the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The author declares that there is no conflict of interest. The author does not receive any financial support from any organization.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ohn, HM. Internal audit techniques for testing laboratories: ISO/IEC 17025:2017 perspective. Accred Qual Assur (2024). https://doi.org/10.1007/s00769-024-01592-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00769-024-01592-z