Abstract
In this paper, a dynamic analysis of a tunable novel triple-electrode variable capacitor is presented. It is subjected to a base excitation that can act as an accelerometer with a wide measurement range. A clamped–clamped porous microbeam connected to a frame and a proof mass in the middle of it form the structure. The sensing section of the accelerometer is in the form of capacitive sensing combs in which the fixed fingers connected to the frame are subjected to a biasing DC voltage (\({V}_{\mathrm{S}}\)). In the tuning section of the accelerometer, two fixed fingers (electrodes) connected to the frame are subjected to a DC tuning voltage (\({V}_{\mathrm{T}}\)), and two moving free electrical charge fingers connected to the beam act as a sliding connector. A DC tuning voltage applied to the fixed electrodes generates an electrostatic force that works as a tunable voltage-sliding nonlinear spring in the structure. Coupled nonlinear differential equations of the transversal and longitudinal vibration of the structure in the presence of the base excitation are extracted. The steady-state solution of the accelerometer is obtained based on a physically based learning method that makes it possible to obtain its frequency response for the first harmony as well as for the higher harmonies and to predict primary and secondary resonances in different harmonies of the response. The transient response of the accelerometer in exposure to various types of external acceleration fields such as step, single pulse, and repetitive pulse is investigated. The frequency response of the accelerometer for different values of tuning voltage is studied. It is shown that the tuning stiffness of this voltage-sliding spring provides a highly effective solution to realize instrumentation with wide-range measurement. The presented tunability can enable the structure to act as an effective accelerometer, microresonator, energy harvester, and so on.
Similar content being viewed by others
References
Ghanbari, M., Rezazadeh, G.: A MEMS-based methodology for measurement of effective density and viscosity of nanofluids. Eur. J. Mech. B 86, 67–77 (2021)
Ghanbari, M., Rezazadeh, G.: An electrostatically actuated microsensor for determination of micropolar fluid physical properties. Meccanica 55, 2091–2106 (2021)
Mustafazadeh, A., Pandit, M., Zhao, C., Sobreviela, G., et al.: A vibrating beam MEMS accelerometer for gravity and seismic measurements. Sci. Rep. 10, 10415 (2020)
Zhao, M., Jiang, K., Bai, H., Wang, H., Wei, X.: A MEMS-based Fabry–Pérot accelerometer with high resolution. Microsyst. Technol. 26, 1961–1969 (2020)
Liu, B., Wang, J., Chen, D., Chen, J., Xu, C., et al.: A MEMS-based electrochemical angular accelerometer with integrated plane electrodes for seismic motion monitoring. IEEE Sens. J. 20(18), 10469–10475 (2020)
Liang, T., Junbo, W., Chen, D., Liu, B., She, X., et al.: A MEMS-based electrochemical angular accelerometer with a force-balanced negative feedback. IEEE Sens. J. 21(14), 15972–15978 (2021)
Tahmasebipour, M., Vafaie, A.: A novel single axis capacitive MEMS accelerometer with double-sided suspension beams fabricated using WEDM. Sens. Actuators A: Phys. 309, 112003 (2020)
Xiao, D., Li, Q., Hou, Z., Xia, D., Xu, X., Wu, X.: A double differential torsional micro-accelerometer based on V-shape beam. Sens. Actuators, A 258, 182–192 (2017)
Chen, M., Zhu, R., Lin, Y., Zhao, Z., Che, L.: Analysis and compensation for the nonlinearity of sandwich MEMS capacitive accelerometer induced by fabrication process error. Microelectron. Eng. 252, 111672 (2022)
Fang, Z., Yin, Y., Chen, C., Zhang, S., Liu, Y., Han, F.: A sensitive micromachined resonant accelerometer for moving-base gravimetry. Sens. Actuators, A 325, 112694 (2021)
Shi, S., Geng, W., Bi, K., Shi, Y., Li, F., He, J., Chou, X.: High sensitivity MEMS accelerometer using PZT-based four L-shaped beam structure. IEEE Sens. J. 22(8), 7627–7636 (2022)
Wang, C., Hao, Y., Sun, Z., Zu, L., Yuan, W., Chang, H.: Design of a capacitive MEMS accelerometer with softened beams. Micromachines 13(3), 459 (2022)
Ghanbari, M., Rezazadeh, G.: A liquid-state high sensitive accelerometer based on a micro-scale liquid marble. Microsyst. Technol. 26, 617–623 (2019)
Ahmadian, M., Jafari, K.: A graphene-based wide-band MEMS accelerometer sensor dependent on wavelength modulation. IEEE J. Mag. Sens. J. 19(15), 6226–6232 (2019)
Guo, Y., Ma, Z., Zhang, T., Zheng, X., Jin, Z.: A stiffness-tunable MEMS accelerometer. J. Micromach. Microeng. 31(2), 025005 (2021)
Daeichin, M., Ozdogan, M., Towfighian, S., Miles, R.: Dynamic response of a tunable MEMS accelerometer based on repulsive force. Sens. Actuators A 289, 34–43 (2019)
Zu, L., Hao, Y., Wang, M., Chang, H.: A novel mode-localized accelerometer employing a tunable annular coupler. IEEE Sens. J. 22(7), 6426–6434 (2022)
Wang, C., Wang, Y., Fang, W., Song, X., Quan, A. et al.: A Mems Accelerometer with an auto-tuning system based on an electrostatic anti-spring. In: IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS). pp. 184–187 (2021)
Aliev, G.N., Goller, B., Snow, P.A.: Elastic properties of porous silicon studied by acoustic transmission spectroscopy. J. Appl. Phys. 110, 043534 (2011)
Mescheder, U.M., Kovacs, A., Kronast, W., Barsony, I., Adam, M., Ducso, C.: Porous Silicon as multifunctional material in MEMS. In: Proceeding of 1st IEEE Conference in Nanotechnology, Maui, USA (2001)
Rice, R.W.: Use of normalized porosity in models for the porosity dependence of mechanical properties. J. Mater. Sci. 40, 983–989 (2005)
Bert, C.W.: Prediction of elastic moduli of solids with oriented porosity. J. Mater. Sci. 20, 2220–2224 (1985)
Barla, K., Herino, R., Bomchil, G., Pfister, C.J., Freund, A.: Determination of lattice parameter and elastic properties of porous silicon by X-ray diffraction. J. Cryst. Growth 68, 727–732 (1984)
Da Fonseca, R.J.M., Saurel, J.M., Despaux, G.: Elastic characterization of porous silicon by acoustic microscopy. Superlattices Microstruct. 16, 21–23 (1994)
Martini, R., Depauw, V., Gonzalez, M., Vanstreels, K., Nieuwenhuysen, K.V., Gordon, I., Poortmans, J.: Mechanical properties of sintered meso-porous silicon: a numerical model. Nanoscale Res. Lett. 7, 597 (2012)
Ghanbari, M., Hossainpour, S., Rezazadeh, G.: Studying thin film damping in a micro-beam resonator based on non-classical theories. Acta Mech. Sin. 32(3), 369–379 (2015)
Ghanbari, M., Rezazadeh, G.: Estimating the effective quality factor of a rotary comb-drive microresonator based on a non-classical theory. Microsyst. Technol. 27, 3533–3543 (2021)
Veijola, T., Kuisma, H., Lahdenperä, J., Ryhänen, T.: Equivalent-circuit model of the squeezed gas film in a silicon accelerometer. Sens. Actuators A 45, 239–248 (1995)
Ghanbari, M., Hossainpour, S., Rezazadeh, G.: Study of squeeze film damping in a micro-beam resonator based on micropolar theory. Latin Am. J. Solids Struct. 12(1), 77–91 (2015)
Wu, Z., Huang, X., Xiang, X., Zheng, Q.: Electro-superlubric springs for continuously tunable resonators and oscillators. Commun. Mater. 2, 104 (2021)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflict of interest to declare.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ghanbari, M., Rezazadeh, G. & Moloudpour-Tolkani, V. Nonlinear dynamics of a tunable novel accelerometer, tunable with a microtriple electrode variable capacitor. Acta Mech 234, 3197–3218 (2023). https://doi.org/10.1007/s00707-023-03552-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-023-03552-z