Abstract
Active trailing edge flaps (TEFs) are one of the most promising devices for helicopter vibration reduction. Smart actuators such as the piezoelectric stack actuators (PEAs) are used for TEF actuation. PEAs possess high energy density and have large force in dynamic condition but are limited to small displacements. In this investigation, we study a linear to rotary motion amplification mechanism (AM-2) based on a pinned–pinned post-buckled beam to actuate trailing edge flaps. A linear motion amplification mechanism is developed and coupled with AM-2 to amplify angular flap deflections. Experiments are conducted on bench top-test setup, and maximum flap angle deflections of the order of 12° are achieved in the static case. An aeroelastic analysis is performed and 91 % reduction in helicopter vibration is obtained with multiharmonic control inputs.
Similar content being viewed by others
References
Lee T., Chopra I.: Design of piezostack-driven trailing-edge flap actuator for helicopter rotors. Smart Mater. Struct. 10, 15–24 (2001)
Kim J.-S., Wang K.W., Smith E.C.: Synthesis and control of piezoelectric resonant actuation systems with buckling-beam motion amplifier. AIAA J. 46, 787–791 (2007)
Jiang J., Mockensturm E.: A motion amplifier using an axially driven buckling beam I: design and experiments. Nonlinear Dyn. 43, 391–409 (2006)
Mallick, R., Ganguli, R., Bhat, M.S.: An innovative motion amplification mechanism using nonlinear buckling vibrations of a post-buckled beam for helicopter trailing edge flap actuation. In: 3rd Asian Conference on Mechanics of Functional Materials and Structures, New Delhi, India, 5th–8th December (2012)
Mallick, R., Ganguli, R., Bhat, M.S.: Nonlinear dynamics of a post-buckled beam for actuating helicopter trailing edge flap. In: 69th Annual Forum of the American Helicopter Society, Phoenix, Arizona, USA, May 21–23 (2013)
Bolotin, V.V.: The Dynamic Stability of Elastic Systems. Holden-Day Inc., San Francisco (1964)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mallick, R., Ganguli, R. & Bhat, M.S. A feasibility study of a post-buckled beam for actuating helicopter trailing edge flap. Acta Mech 225, 2783–2787 (2014). https://doi.org/10.1007/s00707-014-1215-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-014-1215-0