Abstract.
Strain effects on semiconductor layers were studied by means of optical spectroscopic techniques with a device developed especially for the study of layered structures and microstructures. Raman, modulated photoreflectance and reflectance anisotropy spectroscopy (RAS) were applied. Measurements were performed on elemental semiconductors (Si), semiconductor alloys (Si–Ge) and III–V semiconductor compounds (GaAs). By application of RAS, strains lower than 10−4 could be resolved, which is at least one order of magnitude lower than those observable with Raman and modulated reflectance techniques. The RAS spectra of layers strained along either the [010] or [011] direction showed a derivative-like structure at E1-gap energies, which increased linearly and very quickly with increasing strain. The dependence of this spectral feature on applied strain was used to evaluate strain-dependent effects. This behaviour strongly suggests that RAS can be applied for the optical characterisation of strain in semiconductor microstructures and devices, with a higher efficiency and accuracy than that achieved by previously established optical methods such as Raman and modulation spectroscopy. In addition, the compactness and ease of operation of the instrumentation of RAS provides considerable potential for in situ monitoring/control of semiconductor fabrication conditions.
Similar content being viewed by others
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Papadimitriou, D., Liarokapis, E. & Richter, W. Development and Application of Instrumental Methods for Strain Analysisof Semiconductor Layers and Devices. Mikrochim Acta 136, 165–169 (2001). https://doi.org/10.1007/s006040170048
Issue Date:
DOI: https://doi.org/10.1007/s006040170048