Abstract
To study the shear behaviors of jointed rocks reinforced by basalt fiber-reinforced polymer (BFRP) bars and steel–FRP composite bars (SFCBs), we conduct laboratory tests and numerical simulations to analyze the shear strength, shear stiffness, energy dissipation, and bolt failure modes. Our results show that the shear stiffness of the BFRP bolted specimen is lower than that of the specimens bolted by steel bars and SFCBs, but the residual shear strength is higher. SFCB-reinforced jointed rock has the highest peak shear strength, and its residual strength is similar to that of the steel bar bolted specimen. The total energy absorbed by the BFRP bolted specimen is comparable to that absorbed by the steel bolted specimen. When the bolt inclination angle is 60°, the shear strength of the BFRP bar bolted specimens is higher than that of the steel reinforced one. The failure characteristics of BFRP bar bolted rocks can be categorized as resin matrix fracture, resin matrix and fiber shear, and fracture of resin matrix and rocks. The failure modes of the SFCB divided into surface FRP failure and steel bending. Based on numerical results, BFRP bars have larger axial force than conventional bolts, but lower shear stress. The axial stress of the BFRP bar increases as the bolt inclination angle decreases. Moreover, the BFRP bar is more likely to cause shear cracks at the interface between the rock and the bolt.
Highlights
-
Experimental and numerical tests were conducted on the jointed specimens reinforced by Basalt Fiber Reinforced Polymer bar and Steel-FRP composite bar.
-
In terms of shear stiffness and residual shear strength, the jointed specimen reinforced by Basalt Fiber Reinforced Polymer bar and Steel-FRP composite bar differ significantly from steel.
-
The specimens reinforced by Basalt Fiber Reinforced Polymer bar are sensitive to the effect of the bolt inclination angles and have higher shear strengths than conventional bolts at the bolt inclination angle is 60°.
-
The axial force and shear force variation laws of different types of bolts were discovered.
Similar content being viewed by others
References
Abaqus (2017) User documentation, Dessault Systems
ASTM (1997) Standard test method for flexural toughness and first-crack strength of fiber reinforced concrete. ASTM 1018, West Conshohocken: ASTM International, 544–551.
Barenblatt GI (1962) Mathematical theory of equilibrium cracks formed in brittle fracture. Adv Appl Mech 7:56–129
Benmokrane B, Robert M, Mohamed H M, et al (2017) Durability assessment of glass FRP solid and hollow bars (rock bolts) for application in ground control of Jurong Rock Caverns in Singapore. J Compos Const 21(3):06016002.1–06016002.4
Bjurstrom S (1974) Shear strength of hard rock joints reinforced by grouted untensioned bolts. 3rd ISRM congress, Denver, USA, 1194–1199.
Cameselle Molares A, Vassilopoulos AP, Renart J, Turon A, Keller T (2018) Numerical simulation of two-dimensional in-plane crack propagation in FRP laminates. Compos Struct 200:396–407
Chen Y (2014) Experimental study and stress analysis of rock bolt anchorage performance. J Rock Mech Geotechn Eng 6(5):428–437
Chen C, Nemcik J, Ren T, Aziz N (2013) A study of rock bolting failure modes. Int J Min Sci Technol 23(1):79–88
Cui GJ, Zhang CQ, Chen JL, Yang FJ, Zhou H, Lu JJ (2020) Effect of bolt inclination angle on shear behavior of bolted joints under CNL and CNS conditions. J Central South Univ 27(03):937–950
Dong Z, Gang W, Bo X, Wang X, Taerwe L (2016) Bond durability of BFRP bars embedded in concrete under seawater conditions and the long-term bond strength prediction. Mater Des 92:552–562
Dtt A, Tmp A, Hong HB, Wc A (2021) Numerical investigation of flexural behaviours of precast segmental concrete beams internally post-tensioned with unbonded FRP tendons under monotonic loading. Eng Struct 249(15):113341
Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8:100–104
Ferrero AM (1995) The shear strength of reinforced rock joints. Int J Rock Mech Mining Sci Geomech Abstr 32(6):595–605
Ge W, Zhang J, Cao D, Tu Y (2015) Flexural behaviors of hybrid concrete beams reinforced with BFRP bars and steel bars. Constr Build Mater 87:28–37
Goodman RE (1970) The deformability of joints. Determination of the in situ modulus of deformation of rock. ASTM STP 477:174–196
Hawileh RA, Naser MZ, Abdalla JA (2013) Finite element simulation of reinforced concrete beams externally strengthened with short-length CFRP plates. Compos B Eng 45(1):1722–1730
Jalalifar H, Aziz N, Hadi M (2006) The effect of surface profile, rock strength and pretension load on bending behaviour of fully grouted bolts. Geotech Geol Eng 24(5):1203–1227
JG/T 406-2013 (2013) Glass fiber reinforced polymer rebar for civil engineering. Chinese, Beijing.
Jiang HX, Meng DG (2018) 3D numerical modelling of rock fracture with a hybrid finite and cohesive element method. Eng Fract Mech 199:280–293
Li Y, Liu C (2019) Experimental study on the shear behavior of fully grouted bolts. Constr Build Mater 223:1123–1134
Li L, Hagan PC, Saydam S, Hebblewhite B, Li Y (2016) Parametric study of rockbolt shear behaviour by double shear test. Rock Mech Rock Eng 49(12):4787–4797
Li YZ, Dwayne D, Tannantc PJY, Su GS (2021) Experimental and analytical investigation of the shear resistance of a rock joint held by a fully-grouted bolt and subject to large deformations. Transportation Geotechnics 31:100671
Li JC, Yuan W, Li HB, Zou CJ (2022) Study on dynamic shear deformation behaviors and test methodology of sawtooth-shaped rock joints under impact load. Int J Rock Mech Min Sci 158:105210
Ludvig B (1983) Shear tests on rock bolts. Rock Bolting: Theory and Application in Mining and Underground Construction, Proceedings of the International Symposium on Rock Bolting, Abisko, 193–203.
Micelli F, Cascardi A, Aiello M A (2018) A Study on FRP confined concrete in presence of different preload levels. In: Proceedings of the 9th international conference on fibre-reinforced polymer (FRP) composites in civil engineering-CICE, Paris, France, 17–194.
Monaldo E, Nerilli F, Vairo G (2019) Basalt-based fiber-reinforced materials and structural applications in civil engineering. Compos Struct 214:246–263
Okelo R, Yuan RL (2005) Bond strength of fiber reinforced polymer rebars in normal strength concrete. J Compos Constr 9(3):203–213
Qiao P, Ying C (2008) Cohesive fracture simulation and failure modes of FRP–concrete bonded interfaces. Theoret Appl Fract Mech 49(2):213–225
Su C, Wang X, Ding LN, Chen ZY, Liu S, Wu ZS (2021) Experimental study on the seismic behavior of seawater sea sand concrete beams reinforced with steel–FRP composite bars. Eng Struct 248:113269
Tang Z, Zhou Y, Feng J, Liu Y, He H, Fan H (2020) Concrete protective arches reinforced with BFRP bars: construction and quasi-static structural performances. Tunn Undergr Space Technol 108(4):103731
Tao Y, Remennikov Alex M (2014) Novel hybrid FRP tubular columns for sustainable mining infrastructure: Recent research at University of Wollongong. Int J Min Sci Technol 24(3):311–316
Tomlinson DA (2015) Fam Performance of concrete beams reinforced with basalt FRP for flexure and shear. J Compos Constr 19(2):04014036
Wang X, Wang ZH, Wu ZS, Fang C (2014) Shear behavior of basalt fiber reinforced polymer (FRP) and hybrid FRP rods as shear resistance members. Construct Building Mater 73(30):781–789
Wang G, Zhang Y, Jiang Y et al (2018a) Shear behaviour and acoustic emission characteristics of bolted rock joints with different roughnesses. Rock Mech Rock Eng 51:1885–1906
Wang WJ, Song QQ, Xu CS, Gong HL (2018b) Mechanical behaviour of fully grouted GFRP rock bolts under the joint action of pre-tension load and blast dynamic load. Tunn Undergr Space Technol 73:92–91
Wang CS, Liu RC, Jiang YJ, Wang G, Luan HJ (2022a) Effect of shear-induced contact area and aperture variations on nonlinear flow behaviors in fractal rock fractures. J Rock Mech Geotech Eng. https://doi.org/10.1016/j.jrmge.2022.04.014
Wang CS, Jiang YJ, Wang G, Luan HJ, Zhang YC, Zhang SH (2022b) Experimental investigation on the shear behavior of the bolt-grout interface under CNL and CNS conditions considering realistic bolt profiles. Geomech Geophys Geo-Energy Geo-Resour 8(4):1–23
Wu G, Wu ZS, Luo YB, Sun ZY, Hu XQ (2010) Mechanical properties of steel–FRP composite bar under uniaxial and cyclic tensile loads. J Mater Civ Eng 22(10):1056–1066
Zhan Y, Liu C, Kong X, Li Y (2018) Measurement of fiber reinforced composite engineering constants with laser ultrasonic. Appl Acoust 139:182–188
Zhang SB, Wang G, Jiang YJ et al (2019) Study on shear mechanism of bolted jointed rocks: experiments and CZM-based FEM simulations. Appl Sci 10(1):62
Zhao DP, Wen SX, Wang LW, Zhang BH, Yang L (2021) Structural parameters and critical anchorage length of tunnel system bolts made of basalt fiber. Constr Build Mater 310:125081
Zhou XP, Bi J, Qian QH (2015) Numerical simulation of crack growth and coalescence in rocklike materials containing multiple pre-existing flaws. Rock Mech Rock Eng 48(3):1097–1114
Zhou W, Tang LW, Liu XH, Ma G, Chen MX (2016) Mesoscopic simulation of the dynamic tensile behaviour of concrete based on a rate-dependent cohesive model. Int J Impact Eng 95:165–175
Acknowledgements
The authors would like to acknowledge financial support from the National Natural Science Foundation of China (Grant No: 52079077, 52209141); Natural Science Foundation of Shandong Province, China (Grant No.ZR2021QE069).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, S., Wang, C., Wang, G. et al. Experimental and Numerical Study on Shear Behaviors of Rock Joints Reinforced by SFCBs and BFRP Bars. Rock Mech Rock Eng 56, 1717–1737 (2023). https://doi.org/10.1007/s00603-022-03144-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-022-03144-8