References
Cai M, Champaigne D (2012) Influence of bolt-grout bonding on MCB conebolt performance. Int J Rock Mech Min Sci 49:165–175
Cai M, Kaiser P (2018) Rockburst support reference book—volume I: rockburst phenomenon and support characteristics. Laurentian University, Sudbury, p 284
Gholinejad M, Arshadnejad S (2012) An experimental approach to determine the hole-pressure under expansion load. J South Afr Inst Min Metall 112:631–635
Goto K, Kojima K, Watabe K (1988) The mechanism of expansive pressure and blow-out of static demolition agent. Conf Demolit Reuse Concrete Masonry 1:116–125
Graham MWJ (1996) Developments and trends in miners/bolters. Int J Rock Mech Min Sci Geomech Abstr 1:31A–32A
Hoek E, Brown ET (1980) Underground excavations in rock. CRC, Boca Raton
Hoek E, Kaiser PK, Bawden WF (2000) Support of underground excavations in hard rock. CRC, Boca Raton
Kaiser PK, Cai M (2012) Design of rock support system under rockburst condition. J Rock Mech Geotech Eng 4:215–227
Kaiser P, KTannant DD, McCreath DR (1996) Canadian rockburst support handbook. Geomechanics Research Centre, Laurentian University, Sudbury
Li CC (2011) Rock support for underground excavations subjected to dynamic loads and failure. Adv Rock Dyn Appl Taylor and Francis Group, London, pp 483–506
Li CC, Doucet C (2012) Performance of D-bolts under dynamic loading. Rock Mech Rock Eng 45:193–204
Pells P, Bertuzzi R (1999) Permanent rockbolts-the problems are in the detail. In: Proceedings, tenth Australian tunneling conference, Melbourne, Australia, pp 21–24
Scott J (1974) Friction rock stabilizers and their application to ground control problems. Min Eng 26(8):51
Stacey T (2011) Support of excavations subjected to dynamic (rockburst) loading. In: Proceedings of the 12th international congress of the international society of rock mechanics, pp 137–145
Wijk G, Skogberg B (1982) The Swellex rock bolting system. In: 14th Canadian rock mechanics symposium, pp 106–115
Acknowledgements
This study was funded by the State Key Research Development Program of China (2018YFC0604400), the National Science Foundation of China (51874068), the Fundamental Research Funds for the Central Universities (N160107001), and the 111 Project (B17009). The authors wish to thank the staff of Fushun Hongtoushan Copper Mine for providing access to their mine for the field test of the SSAB. The authors also acknowledge laboratory assistant, Jun Tian, for his contributions to the laboratory test. The authors would like to thank the reviewers for their comments and suggestions that greatly improved the quality of the paper.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xu, S., Hou, P., Cai, M. et al. An Experiment Study on a Novel Self-Swelling Anchorage Bolt. Rock Mech Rock Eng 52, 4855–4862 (2019). https://doi.org/10.1007/s00603-019-01854-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-019-01854-0