References
Barton N (1973) Review of a new shear strength criterion for rock joints. Eng Geol 7:287–332
Barton N, Choubey V (1977) The shear strength of rock joints in theory and practice. Rock Mech 10:1–54
Jang HS, Kang SS, Jang BA (2014) Determination of joint roughness coefficients using roughness parameters. Rock Mech Rock Eng 47:2061–2073
Tatone BSA, Grasselli G (2010) A new 2D discontinuity roughness parameter and its correlation with JRC. Int J Rock Mech Min Sci 47:1391–1400
Tse R, Cruden DM (1979) Estimating joint roughness coefficients. Int J Rock Mech Min Sci 16:303–307
Yu XB, Vayssade B (1991) Joint profiles and their roughness parameters. Int J Rock Mech Min Sci 28:333–336
Acknowledgments
We thank Prof. B.-A. Jang of Kangwon National University (Republic of Korea) for sharing the digital data sets generated by Jang et al. (2014).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pickering, C., Aydin, A. Modeling Roughness of Rock Discontinuity Surfaces: A Signal Analysis Approach. Rock Mech Rock Eng 49, 2959–2965 (2016). https://doi.org/10.1007/s00603-015-0870-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-015-0870-3