Abstract
This paper aims to develop an RF MEMS shunt switch with low actuation voltage and improved RF performance at high-frequency applications. Here we have developed two beam structures for the analysis of electromechanical and electromagnetic parameters using COMSOL and HFSS software. The pull-in voltage of each beam is calculated as 5.8 V for beam-1 and 3.6 V for beam-2, the simulated results are compared with the theoretical results with the analytical model equations. The capacitance analysis of the proposed switch is 11.09 fF, 4.61 pF and the switching time is 6.2 µs. Capacitance is a key parameter to obtain good RF performance, the return and insertion loss of the proposed beam structures are − 35.29 dB, − 42.95 dB, − 0.76 dB, − 0.87 dB, and the isolation is obtained as − 21.02 dB, − 22.34 dB at 20 GHz and 41.21 GHz. The switch can be utilized in high-frequency communication systems such as point-to-point microwave links, satellite communication systems, and 5G wireless networks to improve signal routing and frequency tuning.
Similar content being viewed by others
Data availability
The authors will be provided the data upon reasonable request.
References
Ahmadpour SS, Navimipour NJ, Mosleh M, Bahar AN, Yalcin S (2023a) A nano-scale n-bit ripple carry adder using an optimized XOR gate and quantum-dots technology with diminished cells and power dissipation. Nano Commun Netw 36:100442
Ahmadpour SS, Heidari A, Navimpour NJ, Asadi MA, Yalcin S (2023b) An efficient design of multiplier for using in nano-scale IoT Systems using atomic silicon. IEEE Internet Things J 10:14908
Ahmadpour SS, Navimipour NJ, Bahar AN, Mosleh M, Yalcin S (2023c) An energy-aware nano-scale design of reversible atomic silicon based on miller algorithm. IEEE Des Test 40:62–69
Ansari HR, Khosroabadi S (2019) Design and simulation of a novel RF MEMS shunt capacitive switch with a unique spring for Ka-band application. Microsyst Technol 25(2):531–540
Bansal D, Kumar A, Sharma A, Kumar P, Rangra KJ (2014) Design of novel compact anti-stiction and low insertion loss RF MEMS switch. Microsyst Technol 20(2):337–340
Bhatia V, Kaur S, Sharma K, Rattan P, Jagota V, Kemal MA (2021) Design and simulation of capacitive MEMS switch for Ka band application. Wireless Commun Mob Comput 2021:1–8
Demirel K, Yazgan E, Demir Ş, Akın T (2015) A new temperature-tolerant RF MEMS switch structure design and fabrication for Ka-Band applications. J Microelectromech Syst 25(1):60–68
Goldsmith CL, Zhimin Yao S, Eshelman D (1998) Performance of low-loss RF MEMS capacitive switches. IEEE Microw Guid Wave Lett 8(8):269–271
Gopi CC, Maity R, Maity NP (2021) Electromagnetic modelling and analysis of RF MEMS capacitive shunt switch for 5G applications. Microelectr J 117:105262
Gopi Chand C, Reshmi Maity K, Srinivasa Rao NP, Maity KG, Sravani. (2022) Capacitance modelling of perforated RF MEMS shunt switch. Microsyst Technol 28(11):2561–2570
Han Ke, Guo X, Smith S, Deng Z, Li W (2018) Novel high-capacitance-ratio mems switch: design, analysis and performance verification. Micromachines 9(8):390
Hsu H-H, Koslowski M, Peroulis D (2011) An experimental and theoretical investigation of creep in ultrafine crystalline nickel RF-MEMS devices. IEEE Trans Microw Theory Tech 59(10):2655–2664
Jiang L, Ma N, Wang L, Huang X (2023) High-reliability circular-contact RF MEMS switches in silicon hermetic package. J Micromech Microeng 33(6):065004
Koutsoureli M, Birmpiliotis D, Michalas L, Papaioannou G (2016) An in depth analysis of pull-up capacitance-voltage characteristic for dielectric charging assessment of MEMS capacitive switches. Microelectr Reliab 64:688–692
Kurmendra KR (2019) Design and analysis of MEMS shunt capacitive switch with Si 3 N 4 dielectric and au beam material to improve actuation voltage and RF performance in consideration with and without circular perforations. Trans Electr Electron Mater 20:299–308
Liu Y, Bey Y, Liu X (2017) High-power high-isolation RF-MEMS switches with enhanced hot-switching reliability using a shunt protection technique. IEEE Trans Microw Theory Tech 65(9):3188–3199
Mafinejad Y, Kouzani A, Mafinezhad K, Hosseinnezhad R (2017) Low insertion loss and high isolation capacitive RF MEMS switch with low pull-in voltage. Int J Adv Manuf Technol 93(1–4):661–670
Mafinejad Y, Ansari HR, Khosroabadi S (2020) Development and optimization of RF MEMS switch. Microsyst Technol 26(4):1253–1263
Molaei S, Ganji BA (2017) Design and simulation of a novel RF MEMS shunt capacitive switch with low actuation voltage and high isolation. Microsyst Technol 23(6):1907–1912
Papaioannou G, Plana R, Mukherjee M (2010) Physics of charging in dielectrics and reliability of capacitive RF-MEMS switches. In: Mukherjee M (ed) Advanced microwave and millimeter wave technologies semiconductor devices circuits and systems. InTech, pp 275–302
Patel CD, Rebeiz GM (2012) A high-reliability high-linearity high-power RF MEMS metal-contact switch for DC–40-GHz applications. IEEE Trans Microw Theory Tech 60(10):3096–3112
Pramanik AK, Mahalat MH, Pal J, Ahmadpour SS, Sen B (2023) Cost-effective synthesis of QCA logic circuit using genetic algorithm. J Supercomput 79(4):3850–3877
Rebeiz GM, Muldavin JB (2001) RF MEMS switches and switch circuits. IEEE Microw Mag 2(4):59–71
Sharma K, Karmakar A, Prakash K, Chauhan A, Bansal S, Hooda M, Kumar S, Gupta N, Singh AK (2020) Design and characterization of RF MEMS capacitive shunt switch for X, Ku, K and Ka band applications. Microelectron Eng 227:111310
Sravani K, Girija D, Prathyusha KS, Rao PA, Kumar GS, Gopi LC, Chand PN, Thalluri LN, Guha K (2019) Design and performance analysis of low pull-in voltage of dimple type capacitive RF MEMS shunt switch for Ka-band. IEEE Access 7:44471–44488
Swarnkar A, DasGupta A, Nair DR (2019) Design, fabrication and characterization of RF MEMS shunt switch for wideband operation of 3 GHz to 30 GHz. J Micromech Microeng 29(11):115009
Van Caekenberghe K, Sarabandi K (2008) A self-aligned fabrication process for capacitive fixed-fixed beam RF MEMS components. J Microelectromech Syst 17(3):747–754
Zheng W-B, Huang Q-A, Liao X-P, Li F-X (2005) RF MEMS membrane switches on GaAs substrates for X-band applications. J Microelectromech Syst 14(3):464–471
Zhu H, Pan J, Tan S, Huang G, Song M (2022) Design and simulation of RF MEMS switches with the supporting columns. Energy Rep 8:390–396
Zhu H, Cui W, Li Y, Song M (2023) Design and analysis of a fluid-filled RF MEMS switch. Sensors 23(5):2692
Zolfaghari P, Arzhang V, Zolfaghari M (2018) A low loss and power efficient micro-electro-thermally actuated RF MEMS switch for low power and low loss applications. Microsyst Technol 24:3019–3032
Acknowledgements
The Authors are thankful to Mizoram University (A Central University, Govt. of India), Mizoram, for providing essential Finite Element Modelling tools.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chand, C.G., Gautam, A.S., Kumar, M. et al. Analytical model and analysis of RF MEMS switch for Ka-band applications. Microsyst Technol 30, 117–125 (2024). https://doi.org/10.1007/s00542-023-05581-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-023-05581-z