Abstract
This paper presents Micro-Electro-Mechanical System (MEMS) diaphragm based piezoresistive pressure sensor for biomedical applications. A piezoresistive pressure sensor with a squared bossed diaphragm structure was developed for a low-pressure range. A trade-off between the deformation of the diaphragm and the stress induced in the piezo resistors on the diaphragm edge is analysis by using Carbon nanotubes (CNTs). CNTs are introduced in the sensor being a sensitivity material, responsible for wide range of pressure and sensitivity. The simulated results showed that the proposed structure was able to measure low pressure within range of 0–5 kPa with improved sensitivity and linearity. An 800-µm-wide 10-µm-thick square-diaphragm pressure sensor has also been designed and investigated for the different mender shape. It has been observed from the results that maximum sensitivity of 27.82 mV/kPa is achieved for 2-turn piezo resistor and the best non-linearity error − 0.27% FSS is achieved for 1-turn piezo resistor.
Similar content being viewed by others
References
Ali A, Khan A, Ali A, Ahmad M (2017) Pressure-sensitive properties of carbon nanotubes/bismuth sulfide composite materials. Nanomater Nanotechnol 7:1847980417707087
Aqel A, Abou El-Nour KM, Ammar RA, Al-Warthan A (2012) Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation. Arab J Chem 5(1):1–23
Bala S, Khosla M (2018) Comparative study and analysis of CNTFET and tunnel CNTFET. J Nanoelectron Optoelectron 13(3):324–330
Guan T, Yang F, Wang W, Huang X, Jiang B, Zhang D (2016) The design and analysis of piezoresistive Shuriken-structured diaphragm micro-pressure sensors. J Microelectromech Syst 26(1):206–214
Gupta N, Gupta SM, Sharma SK (2019) Carbon nanotubes: synthesis, properties and engineering applications. Carbon Lett 29:419–447
Hossain A, Mian A (2017) Four-terminal square piezoresistive sensors for MEMS pressure sensing. J Sens. https://doi.org/10.1155/2017/6954875
Huang X, Zhang D (2014a) Structured diaphragm with a centre boss and four peninsulas for high sensitivity and high linearity pressure sensors. Micro Nano Lett 9(7):460–463
Huang X, Zhang D (2014b) A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges. Sens Actuat A 216:176–189
Jakati RS, Balavalad KB, Sheeparamatti BG (2016) Comparative analysis of different micro-pressure sensors using comsol multiphysics. In: 2016 International Conference on Electrical, Electronics, Communication, Computer and Optimization Techniques (ICEECCOT) (pp 355–360). IEEE
Katageri AC, Sheeparamatti BG (2015) Carbon nanotube based piezoresistive pressure sensor for wide range pressure sensing applications—a review. Int J Eng Res 4(08):27
Kim JH, Park KT, Kim HC, Chun K (2009) Fabrication of a piezoresistive pressure sensor for enhancing sensitivity using silicon nanowire. In: TRANSDUCERS 2009–2009 International Solid-State Sensors, Actuators and Microsystems Conference (pp 1936–1939). IEEE
Kumar SS, Tanwar A (2020) Development of a MEMS-based barometric pressure sensor for micro air vehicle (MAV) altitude measurement. Microsyst Technol 26(3):901–912
Li C, Cordovilla F, Ocaña JL (2017) The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement. Microsyst Technol 23(12):5677–5687
Li C, Cordovilla F, Jagdheesh R, Ocaña JL (2018) Design optimization and fabrication of a novel structural SOI piezoresistive pressure sensor with high accuracy. Sensors 18(2):439
Li C, Zhao L, Ocaña JL, Cordovilla F, Yin Z (2020) Characterization and analysis of a novel structural SOI piezoresistive pressure sensor with high sensitivity and linearity. Microsyst Technol 26(9):2955–2960
Lu J, Lu M, Bermak A, Lee YK (2007) Study of piezoresistance effect of carbon nanotube-PDMS composite materials for nanosensors. In: 2007 7th IEEE Conference on Nanotechnology (IEEE NANO) (pp 1240–1243). IEEE
Meena KV, Mathew R, Sankar AR (2017) Design and optimization of a three-terminal piezoresistive pressure sensor for catheter based in vivo biomedical applications. Biomed Phys Eng Express 3(4):045003
Meti S, Balavald KB, Sheeparmatti BG (2016) MEMS piezoresistive pressure sensor: a survey. Int J Eng Res Appl 6(4 part 1):23–31
Mishra RB, Kumar SS (2019) Mathematical modelling and comparative study of elliptical and circular capacitive pressure microsensor. J Phys 1240(1):012068 ((IOP Publishing))
Niu Z, Zhao Y, Tian B (2014) Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity. Rev Sci Instrum 85(1):015001
Shaby SM, Premi MSG, Martin B (2015) Enhancing the performance of MEMS piezoresistive pressure sensor using germanium nanowire. Procedia Mat 10:254–262
Song P, Si C, Zhang M, Zhao Y, He Y, Liu W, Wang X (2020a) A novel piezoresistive MEMS pressure sensors based on temporary bonding technology. Sensors 20(2):337
Song P, Ma Z, Ma J, Yang L, Wei J, Zhao Y et al (2020b) recent progress of miniature MEMS pressure sensors. Micromachines 11(1):56
Sosa J, Montiel-Nelson JA, Pulido R (2015) Garcia-Montesdeoca JC (2015) Design and optimization of a low power pressure sensor for wireless biomedical applications. J Sens 9:1–13
Suja KJ, Kumar GS, Nisanth A, Komaragiri R (2015) Dimension and doping concentration based noise and performance optimization of a piezoresistive MEMS pressure sensor. Microsyst Technol 21(4):831–839
Tran AV, Zhang X, Zhu B (2017) The development of a new piezoresistive pressure sensor for low pressures. IEEE Trans Industr Electron 65(8):6487–6496
Tran AV, Zhang X, Zhu B (2018) Mechanical structural design of a piezoresistive pressure sensor for low-pressure measurement: a computational analysis by increases in the sensor sensitivity. Sensors 18(7):2023
Wang C, Hou X, Cui M, Yu J, Fan X, Qian J et al (2020) An ultra-sensitive and wide measuring range pressure sensor with paper-based CNT film/interdigitated structure. Sci China Mater 63(3):403–412
Xu T, Zhao L, Jiang Z, Guo X, Ding J, Xiang W, Zhao Y (2016) A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure. Sens Actuat A 244:66–76
Xu T, Wang H, Xia Y, Zhao Z, Huang M, Wang J et al (2017) Piezoresistive pressure sensor with high sensitivity for medical application using peninsula-island structure. Front Mech Eng 12(4):546–553
Yu H, Huang J (2015) Design and application of a high sensitivity piezoresistive pressure sensor for low pressure conditions. Sensors 15(9):22692–22704
Zhang S, Wang T, Lou L, Tsang WM, Sawada R, Kwong DL, Lee C (2014) Annularly grooved diaphragm pressure sensor with embedded silicon nanowires for low pressure application. J Microelectromech Syst 23(6):1396–1407
Zhao L, Xu T, Hebibul R, Jiang Z, Ding J, Peng N et al (2016) A bossed diaphragm piezoresistive pressure sensor with a peninsula–island structure for the ultra-low-pressure range with high sensitivity. Meas Sci Technol 27(12):124012
Zhu SE, Krishna Ghatkesar M, Zhang C, Janssen GCAM (2013) Graphene based piezoresistive pressure sensor. Appl Phys Lett 102(16):161904
Zou H, Wang J, Li X (2017) High-performance low-range differential pressure sensors formed with a thin-film under bulk micromachining technology. J Microelectromech Syst 26(4):879–885
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Devi, R., Gill, S.S. A squared bossed diaphragm piezoresistive pressure sensor based on CNTs for low pressure range with enhanced sensitivity. Microsyst Technol 27, 3225–3233 (2021). https://doi.org/10.1007/s00542-020-05208-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-020-05208-7