Abstract
In this paper design modifications are proposed in microgripper design using two in-plane chevron electrothermal actuators. The design modifications are, converting free–free gripping arm into a clamped-free gripping arm and inclusion of the heat sinks in the shuttle. The modified design provides reduced temperature at the gripping jaws and higher gripping force. The proposed microgripper is modelled analytically and numerically using MEMS CAD tool CoventorWare. The performance of the microgripper such as displacement, force and temperature for the voltage range of 0–1.2 V is evaluated through numerical and analytical simulation. The results demonstrate the feasibility of fabrication. Further the gripper is made of polysilicon which allows operating the gripper at lower voltage.
Similar content being viewed by others
References
Atashzaban E, Nasiri M (2013) A novel MEMS based linear actuator for mirror shape correction application. J Opt 42(3):247–256
Boudaoud M, Haddab Y, Gorrec YL (2013) Modeling and optimal force control of a nonlinear electrostatic microgripper. IEEE ASME Trans Mechatron 18(3):1130–1139
Chang H, Zhao H, Ye F, Yuan G, Xie J, Kraft M, Yuan W (2013) A rotary comb-actuated microgripper with a large displacement range. Microsyst Technol 20(1):119–126
Iamoni S, Soma A (2014) Design of an electro-thermally actuated cell microgripper. Microsyst Technol 20:869–877
Jericho SK, Jericho MH, Hubbard T, Kujath M (2004) Microtweezers for the manipulation of bacteria and small particles. Rev Sci Instrum 75:1280
Khan F, Bazaz SA, Sohail M (2010) Design, implementation and testing of electrostatic SOI MUMPs based microgripper. Microsyst Technol 16:1957–1965
Kwan AMH, Song S, Lu X, The YK, Teh YF, Chong EWC, Gao Y, Hau W, Zeng F, Wong M, Huang C, Taniyama A, Makino Y, Nishino S, Tsuchiya T, Tabata O (2012) Improved Design for an Electrothermal In-Plane Microactuator. J Microelectromech S 21(3):586–593
Lai Y, McDonald J, Kujath M, Hubbard T (2004) Force, deflection and power measurements of toggled microthermal actuators. J Micromech Microeng 14:49–56
Leondes CT (2006) MEMS/NEMS Handbook Techniques and Applications, Springer
Luo JK, Flewitt AJ, Spearing SH, Fleck NA, Milne WI (2005) Comparsion of microtweezers based on three lateral thermal actuator configurations. J Micromech Microeng 15:1294–1302
Nonaka K, Sakai K, Baillieul J (2004) Open loop oscillatory control for electromagnetic actuated microgrippers. Proc SICE Ann Conf 3:2285–2290
Que L, Park JS, Gianchandani YB (1999) Bent-beam electrothermal actuators for high force application. In: Proceedings of Twelfth IEEE International conference on Micro electro mechanical systems, pp 31–36
Que L, Park JS, Gianchandani YB (2001) Bent-beam electrothermal actuators-Part I: single beam and cascaded devices. J Microelectromech S 10(2):247–254
Shi X, Chen W, Zhang J, Chen W (2013) Design, modeling, and simulation of a 2-d of microgripper for grasping and rotating of optical fibers. In: Proceedings of IEEE/ASME International conference on advanced intelligent mechatronics (AIM) Wollongong Australia, pp 1597–1602
Sinclair MJ (2000) A high force low area MEMS Thermal Actuaor. Sev Intersoc Conf Therm Thermomech Phenom Electron Sys ITHERM 1:127–132
Steiner H, Stifter M, Hortschitz W, Keplinger F (2015) Planar magnetostrictive micromechanical actuator. IEEE T Magn 51(1):1–4
Sun X, Chen W, Fatikow S, Tian Y, Zhou R, Zhang J, Mikczinski M (2014) A novel piezo-driven microgripper with a large jaw displacement. Microsyst Technol, pp 1–12
Varona Jorge V, Tecpoyotl-Torres M, Hamoui AA (2009) Design of MEMS vertical–horizontal chevron thermal actuators. Sensor Actuat A Phys 153(1):127–130
Volland BE, Heerlein H, Rangelow IW (2002) Electrostatically driven microgripper. Microelectron Eng 61–62:1015–1023
Wang DH, Yang Q, Dong HM (2013) A Monolithic Compliant Piezoelectric-Driven Microgripper: design, Modeling, and Testing. IEEE ASME Trans Mechatron 18(1):138–147
Wang Z, Shen X, Chen X (2015) Design, modeling, and characterization of a MEMS electrothermal microgripper. Microsyst Technol, pp 1–8
Zhang R, Chu JK, Chen ZP (2011) A novel SU-8 electrothermal microgripper based on type synthesis of kinematic chain method. In: Proceedings of 16th international conference (Transducers) of Solid-state sensors, actuators and microsystems, pp 466–469
Zhang R, Chu J, Wang H, Chen Z (2013) A multipurpose electrothermal microgripper for biological micro-manipulation. Microsyst Technol 19:89–97
Zhu Y, Corigliano A, Espinosa HD (2006) A thermal actuator for nanoscale in situ microscopy testing: design and characterization. J Micromech Microeng 16(2):242–253
Zubir MNM, Shirinzadeh B, Tian Y (2009) A new design of piezoelectric driven compliant-based microgripper for micromanipulation. Mech Mach Theory 44:2248–2264
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shivhare, P., Uma, G. & Umapathy, M. Design enhancement of a chevron electrothermally actuated microgripper for improved gripping performance. Microsyst Technol 22, 2623–2631 (2016). https://doi.org/10.1007/s00542-015-2561-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-015-2561-0