Abstract
In this paper, we prove that any mean curvature flow translator \(\Sigma ^2 \subset {\mathbb {R}}^3\) with finite total curvature and one end must be a plane. We also prove that if the translator \(\Sigma \) has multiple ends, they are asymptotic to a plane \(\Pi \) containing the direction of translation and can be written as graphs over \(\Pi \). Finally, we determine that the ends of \(\Sigma \) are strongly asymptotic to \(\Pi \) and obtain quantitative estimates for their asymptotic behavior.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
A proper, embedded hypersurface \(\Sigma ^2 \subset {\mathbb {R}}^3\) is a mean curvature flow translator if there is a unit vector V such that \(\Sigma \) satisfies the following equation:
where \(\vec {H}\) is the mean curvature of \(\Sigma \) at a point p, and \(V^\perp \) is the component of V perpendicular to the tangent plane to \(\Sigma \) at p. This is equivalent to saying that the family of surfaces \(\{\Sigma + tV \;:\; t \in (-\infty , \infty )\}\) satisfies the mean cuvature flow (MCF) equation,
where \({\textbf{x}}(p)\) is the vector in \({\mathbb {R}}^3\) corresponding to the position of the point \(p \in \Sigma \).
Translators appear in the singularity theory of the MCF as rescaling limits for Type-II, or slowly-forming, singularities. In general, the limit of such singularities along an essential blow-up sequence is an ancient solution, i.e. a solution that has existed for all past times. A translator is a special case of an ancient solution and one that arises in many important instances of the MCF [1, 2, 8].
Most notably, translators play an important role in singularity formation in mean-convex MCF. A number of results establish that convex and mean-convex translators arise as blow-up limits in the mean-convex MCF of hypersurfaces in \({\mathbb {R}}^{n+1}\) [8, 11]. Furthermore, the geometry of translators with some form of convexity tends to be very rigid. Examples of this rigidity are given by the results of Spruck and Xiao, which tell us that that mean-convex proper translators in \({\mathbb {R}}^3\) are necessarily convex [24] and those of Wang, which prove that an entire, graphical convex translator in \({\mathbb {R}}^3\) is rotationally symmetric [25]. In fact, Brendle and Choi proved in [3] that the only non-compact, strictly-convex and non-collapsed ancient solution in \({\mathbb {R}}^3\) is a rotationally symmetric translator (the so-called “bowl soliton"). This in particular implies that the bowl soliton is one of only three possible blow-up limits at the first singular time of a closed, mean-convex and embedded MCF.
Motivated by the strong results for Type-II blow-ups in the mean-convex and curve shortening flow settings, the following conjecture postulates that similar results hold in a more general setting.
Conjecture 1.1
[14, Open Problem 4.17] All the eternal mean curvature flows of complete, embedded hypersurfaces in \({\mathbb {R}}^{n+1}\) coming from Hamilton’s blow-up procedure are translators.
Once the assumption of any sort of convexity is dropped, the geometry of translators becomes far less rigid and in many ways resembles that of minimal surfaces. Indeed, the resemblance between the minimal surface equation and the translator equation has motivated the construction of many new translators by desingularizing intersections of translators and minimal surfaces. Some examples are the “bowl-like" translators of high genus constructed by Smith [23] and Dávila-del Pino-Nguyen [5], the translating tridents of Nguyen [17], and the “Scherk-like" translators constructed by Hoffman-Martín-White [10].
In this paper, we prove structure theorems for embedded translators with finite total curvature. This is a curvature condition which does not imply any form of convexity, but nonetheless implies quite rigid geometry for the translators which satisfy it. These results should be compared to the well-studied questions concerning the rigidity of minimal surfaces with finite total curvature in \({\mathbb {R}}^3\) [9, 18].
The main results of this paper are the following rigidity theorems.
Theorem 1.2
Let \(\Sigma ^2 \hookrightarrow {\mathbb {R}}^3\) be a complete embedded MCF translator with one end, and finite total curvature
Then, \(\Sigma \) is a plane parallel to V, the direction of motion.
We also prove
Theorem 1.3
Let \(\Sigma \) be a complete embedded translator with finite total curvature, as in Theorem 1.2. Outside of some ball \(B_R\), the ends of \(\Sigma \) may be written as the graphs of functions \(u_i\) over a fixed plane \(\Pi \). Furthermore, each \(u_i\) decays at a rate \(o\big (r^{-\frac{1}{4(1+\delta )}}\big )\) for any \(\delta >0\) as \(r \rightarrow \infty \). In particular, each \(u_i\) decays radially at an exponential rate in any sector in P that excludes the ray \(-tV\), \(t \in (r_0, \infty )\), where \(r_0\) is any non-negative number.
We briefly summarize the proof. The main tools used to prove Theorem 1.2 are a strong maximum principle for translators, a weak maximum principle for the gradient of a graphical translator, and a lemma due to Leon Simon in [22] which gives an approximate graphical decomposition of surfaces with small total curvature. We begin by cutting out a large “high curvature" region of \(\Sigma \), leaving only disjoint annular ends with small total curvature. We choose one of these ends, and paste in a disk with small total curvature bounded by the total curvature of the annular end. We then apply Simon’s lemma to this new disk of small total curvature \(\epsilon ^2\), which is a translator outside of a small fixed radius. The lemma tells us that, away from some “pimples" of small diameter, the surface is “mostly" a graph with gradient bounded by \(C\epsilon ^{1/6}\) over some plane. Away from a neighborhood of the center, we use the strong maximum principle and Schoen’s method of moving planes to show that the pimples must be graphs. Then, using the weak maximum principle for gradients, we show that these graphical pimples must also have small gradient bounded by \(C\epsilon ^{1/6}\). Thus, inside any annulus \(B_\eta {\setminus } B_{C\eta \epsilon ^{1/2}}\), any end can be written as a graph over a plane with gradient bounded by \(C\epsilon ^{1/6}\). If we fix an annulus \(B_R \setminus B_{R^{-1}}\) we can take a blow-down subsequence \(\lambda _i\Sigma \) that can be written in \(B_R {\setminus } B_{R^{-1}}\) as a sequence of graphs over a single plane \(\Pi \) with gradient bounded by \(C\epsilon _i^{1/6}\) where \(\epsilon _i \rightarrow 0\). Then, if we assume we have only one end, we can re-apply the moving planes method and the maximum principle to the blow-down sequence to extract Theorem 1.2 as a consequence.
Note that the application of Simon’s lemma requires that the density of \(\Sigma \), the quantity \(r^{-2}{\mathcal {H}}^2(B_r(x)\cap \Sigma )\), is uniformly bounded when taken over all centers x in \({\mathbb {R}}^3\) and radii \(r \in {\mathbb {R}}_{> 0}\). In Corollary 2.11, we prove the somewhat stronger result that this is true for all surfaces with finite total curvature.
In order to prove Theorem 1.3, we must prove that if we take two points in a convergent blow-down sequence, \(\lambda _i > \lambda _{i+1}\), then the “in between" annular region \(\Sigma \cap (B_{R^{-1}\lambda ^{-1}_{i+1}} {\setminus } B_{R\lambda ^{-1}_i})\) can be written as a graph over the blow-down limit plane \(\Pi \). This is shown by examining two cases: (1) that \(\Sigma \cap (B_{R\lambda ^{-1}_{i+1}} {\setminus } B_{R^{-1}\lambda _{i+1}^{-1}})\) has the same orientation as a graph over \(\Pi \) as \(\Sigma \cap (B_{R\lambda ^{-1}_{i}} {\setminus } B_{R^{-1}\lambda _{i}^{-1}})\), and (2) that these two annular regions have different orientations as graphs over \(\Pi \). In the first case, geometric considerations allow us to apply Schoen’s method of moving planes and the strong maximum principle to obtain graphicality over \(\Pi \). In the second case, we integrate the geodesic curvature over the boundary of \(\Sigma \cap (B_{R^{-1}\lambda ^{-1}_{i+1}} {\setminus } B_{R\lambda _i^{-1}})\) and use the Gauss-Bonnet theorem to show that the surface must have total curvature uniformly bounded below by a constant. This contradicts the fact that the end has arbitrarily small total curvature outside a large radius of our choice. Then, application of the maximum principle and moving along the blow-down sequence allows us to conclude that each end may be written as a graph with sublinear growth over a single plane.
In the final section, we prove the strong asymptotics of the ends \(\Sigma _i = \text {graph}(u_i)\), \(i=1, \ldots , M\). Our main tool is the maximum principle: first we use an exponential barrier to bound the growth of the functions \(u_i\) in the upper half-plane as \(x_1 \rightarrow \infty \). In particular, this decay implies the uniform boundedness of the \(u_i\) on the entire domain. This in turn allows us to obtain a radially decaying barrier based on the modified Bessel function of the second type. This gives the stated asymptotics in Theorem 1.3 and completes the proof.
2 Preliminaries
First, we prove a strong maximum principle for translators.
Lemma 2.1
Let \(V = (v_1, v_2,v_3)\) be a unit vector in the direction of motion of the translating graphs of \(u_1\) and \(u_2\), which are defined on an open set \(\Omega \subset {\mathbb {R}}^2\). Then, \(v = u_2-u_1\) satisfies an equation of the form
where \(a_{ij}\) has ellipticity constants \(\Lambda \) and \(\lambda \) depending only on the upper bounds for the gradients \(|D u_i|\).
Proof
The \(u_\alpha \), \(\alpha =1,2\), both satisfy the quasilinear elliptic equation
Set
We follow the proofs of Gilbarg and Trudinger in [7, Theorem 10.7] and Colding and Minicozzi in [4, Lemma 1.26]. Let \(v = u_2- u_1\), and \(u_t = tu_2 + (1-t)u_1\). Let
By the Fundamental Theorem of calculus and the chain rule, v satisfies
All that remains to show is the uniform ellipticity of \(a_{ij}\). We show this by demonstrating the positive definiteness of the matrix differential DA. If \(\nu \) is a unit vector and \(p \in {\mathbb {R}}^2\), then
Thus, \(a_{ij} = \int _0^1 DA(u_t)dt \) is a positive definite matrix whose ellipticity constants depend on the upper bounds of \(|Du_\alpha |\). \(\square \)
Corollary 2.2
Let \(\Omega \subset {\mathbb {R}}^2\) be an open connected neighborhood of the origin. If \(u_1, u_2:\Omega \rightarrow {\mathbb {R}}\) satisfy the translator Eq. (2.1) with respect to the direction \(V = (v_1, v_2, v_3)\) with \(u_1 \le u_2\) and \(u_1(0) = u_2(0)\), then \(u_1 \equiv u_2\).
Proof
Immediate from Lemma 2.1 and the strong maximum principle proved in [7, Lemma 3.5]. \(\square \)
In addition to this maximum principle, we also obtain a weak maximum principle for the gradients of translators that are graphs over planes containing V, the direction of motion.
Lemma 2.3
If \(V \in {\mathbb {R}}^2 \times \{0\} \subset {\mathbb {R}}^3\), \(\Omega \) is a bounded domain in \({\mathbb {R}}^2 \times \{0\}\), and \(u: \Omega \subset {\mathbb {R}}^2 \rightarrow {\mathbb {R}}\) satisfies (2.1), then the partial derivatives \(D_1 u\) and \(D_2 u\) achieve their maxima and minima on the boundary.
Proof
We set \(V = (1, 0, 0)\) without loss of generality. The Eq. (2.1) becomes
We differentiate this equation with respect to \(x_i\) to obtain
Let \(v = D_i u\). We calculate
This implies that v satisfies a differential equation of the form \(Lv = 0\), where the differential operator \(L = a_{jk}D_{jk} + b_j D_j\) has coefficients given by
We calculate
Similarly
Since u is assumed to be smooth and \(\Omega \) is bounded, the operator L is uniformly elliptic. In particular, L satisfies the hypotheses of [7, Theorem 3.1] and by applying this theorem, we obtain the weak maximum/minimum principle for v. \(\square \)
We now prove a result about the pointwise decay of the second fundamental form |A| and its derivatives. To obtain this result, we use Ecker’s \(\epsilon \)-Regularity theorem for the mean curvature flow of surfaces.
Theorem 2.4
[6, Ecker Regularity Theorem] There exist constants \(\epsilon _0 > 0\) and \(c_0 >0\) such that for any solution \((M_t)_{t \in [0,T)}\) of mean curvature flow, any \(x_0 \in {\mathbb {R}}^3\), and \(\rho \in (0, \sqrt{T})\) the inequality
implies the mean value estimate
Lemma 2.5
For a translator \(\Sigma \) with finite total curvature, if \(\varrho >1\) is distance from the origin, then
Furthermore, in the positive half-space defined by V,
Proof
This is a consequence of Ecker’s \(\epsilon \)-regularity theorem, Theorem 2.4. By the finite total curvature condition, there is a ball \(B_R\) centered at the origin such that \(\int _{\Sigma {\setminus } B_R} |A|^2 <\epsilon _0\). We pick any \(x_0 \in {\mathbb {R}}^3 {\setminus } B_{2R}\), and take \(2\rho ^2 = \text {dist}_{{\mathbb {R}}^3}(x_0, B_{2R})\). Suppose that \(x_0 \in \Sigma \) and take the ball \(B_\rho (x_0)\). Consider the mean curvature flow solution \(\Sigma _t = \Sigma + tV\) defined on the interval \(t \in [-3\rho ^2/4, \rho ^2/4]\). Notice that \(B_R \cap \Sigma + tV\) never intersects \(B_\rho (x_0)\) for any time \(t \in [-3\rho ^2/4, \rho ^2/4]\). Thus,
Theorem 2.4, Ecker’s regularity theorem, yields
Thus, \(|A|^2(x_0) \le C\varrho ^{-1}\), where \(\varrho > 0\) is distance to the origin (which is comparable to \(2\rho ^2 = \text {dist}_{{\mathbb {R}}^3}(x_0, B_{2R})\)). This proves the first statement of the Lemma.
Now we prove the improved curvature decay in the upper half-space \({\mathbb {H}} \subset {\mathbb {R}}^3\) of points in \({\mathbb {R}}^3\) with positive V component. Suppose that \(x_0 \in {\mathbb {H}} \cap \Sigma \) and that \(\rho = \text {dist}_{{\mathbb {R}}^3}(x_0, B_{R})\). Consider the ball \(B_\rho (x_0)\) and the MCF solution \(\Sigma _t = \Sigma + tV\) defined on the interval \(t \in [\rho ^2, 0]\). Since \(x_0\cdot V > 0\), \(\Sigma _t \cap B_R\) never intersects \(B_\rho (x_0)\). Thus, by Theorem 2.4,
Choosing \(t=0\), we see that \(|A|^2(x_0) \le C\rho ^{-2}\). Since \(\rho \approx \varrho \), where \(\varrho > 0 \) is \(|x_0|\), we conclude that \(|A| = O(\varrho ^{-1})\). \(\square \)
Corollary 2.6
If \({\textbf{n}}(p)\) is the normal vector to a translator \(\Sigma \) moving in the direction V at the point p, then
where \(\varrho \) is the distance between p and the origin.
Proof
Therefore,
\(\square \)
Before we can begin the proof of the main theorems, we must show that the embedding of \(\Sigma \) into \({\mathbb {R}}^3\) is proper and that the area ratios, centered at any point, are uniformly bounded. We state the following theorem of Hartman which bounds the intrinsic area growth.
Theorem 2.7
[13, Proposition 1.3] Let \(\Sigma \) be a complete surface with finite total curvature. Then there exists a constant \(C_1>0\) depending only on \(\int _\Sigma |K| dA\), such that
for all \(x \in \Sigma \) and for all \(r > 0\), where \(B^\Sigma _r(x)\) is the intrinsic ball of radius r.
We will extend this statement to the analogous statement for extrinsic balls by comparing intrinsic and extrinsic distances. The following theorem due to Huber gives important information about the topology and geometry of \(\Sigma \).
Theorem 2.8
(Huber) If \(\Sigma \) is a complete surface of finite total curvature immersed in \({\mathbb {R}}^n\), then \(\Sigma \) is conformally equivalent to a compact Riemann surface with finitely many points deleted.
In particular, we note that Huber’s theorem implies that \(\Sigma \) must have finitely many ends and bounded genus. By Huber’s theorem, we have a bijective conformal map, \(f: \Omega ^* \hookrightarrow \Sigma \), from the annulus \(\Omega ^*:= {\mathbb {C}}{\setminus } B_1(0)\) to a given end of \(\Sigma \). Following [16], we consider the family of rescalings
According to [16], there exists a sequence \(\epsilon _k \rightarrow 0\) with the following properties:
-
(i)
There exists a plane \(L \in \text {Gr}(2,3)\) such that the Gauss map converges to the constant L in \(W^{1,2}_{loc}\) on the punctured complex plane.
-
(ii)
The maps \(f_{\epsilon _k}\) converge uniformly on compact subsets of \({\mathbb {C}}\setminus \{0\}\) to a conformal mapping \(f_0: {\mathbb {C}}{\setminus } \{0\} \rightarrow L \subset {\mathbb {R}}^3\) which satisfies \(|\partial _{x_i}f_0(z)| = C|z|^\alpha \).
If we consider \(f_0\) as a holomorphic function \(f_0: {\mathbb {C}}{\setminus } \{0\} \rightarrow {\mathbb {C}}\), it can be seen that \(f_0\) is of the form
However, if \(\alpha > 0\), the graph of the map f must have an self-intersection, since the \(f_{\epsilon _k}\) are converging uniformly as maps into \({\mathbb {R}}^3\). This contradicts the assumption of embeddedness, and thus \(\alpha \) must be zero. Müller and Šverák define the multiplicity of an end by the integer \(m = \alpha + 1\). Therefore, in our situation each end of \(\Sigma \) has multiplicity one.
Now we state a result of Müller and Šverák that allows us to relate extrinsic distances to distances in the parameter space \(\Omega ^*\). Given that each end has unit multiplicity, we simplify the statement of the theorem.
Proposition 2.9
[16, Corollary 4.2.10] Given an end of \(\Sigma \), consider the conformal parametrization \(f: \Omega ^* \rightarrow \Sigma \hookrightarrow {\mathbb {R}}^3\) given by Huber’s theorem. For each \(\epsilon >0\) there exists \(R>0\) such that the following statement holds. If \(Q \subset \Omega ^*\) is a square such that \(Q \cap \{z \in {\mathbb {C}}:\; |z| \le R\} = \emptyset \) and if \(\xi _1, \xi _2 \in \Omega ^*\) are neighboring vertices of Q, then
where \(\lambda \) is a constant.
By [16, Theorem 4.2.1], for \(\xi _1, \xi _2 \in \Omega ^*\) as in Proposition 2.9, \(d_\Sigma (f(\xi _1), f(\xi _2))\) approaches \(e^\lambda |\xi _1 - \xi _2|\) uniformly as \(R \rightarrow \infty \). Taking piecewise-\(C^1\)-paths, we can now compare intrinsic and extrinsic distances on \(\Sigma \). Thus, if \(x_1, x_2 \in \Sigma \subset {\mathbb {R}}^3\), there exists a constant C such that
In particular, if \(x_0 \in \Sigma \), \(B^{\Sigma }_{Cr}(x_0)\) contains the connected component of \(B_r(x_0)\) containing \(x_0\).
We must control the number of connected components in order to use this comparison to bound area ratios. We begin by showing that area ratios are uniformly bounded with respect to centers in any compact set.
Proposition 2.10
If \(\Sigma \) is a complete, embedded surface with finite total curvature and K is a compact domain in \({\mathbb {R}}^3\), there exists a constant \(\beta >0\) that bounds the following area ratios:
Proof
Müller and Šverák prove in [16, Corollary 4.2.5] that for a fixed point \(x_0 \in \Sigma \), the intrinsic and extrinsic distance functions coincide in the limit. That is,
Thus, for very large radii R, the intrinsic balls are comparable to extrinsic balls in the following sense:
Let A(r) denote the area of the geodesic ball \(B_r^\Sigma (x_0)\). A result from [21] cited in the proof of [16, Corollary 4.2.5] tells us that
By the finite total curvature property and Huber’s theorem, the right hand side is bounded by a fixed constant. Since intrinsic and extrinsic balls are comparable, there exists some
such that
By comparison in the limit as \(R\rightarrow \infty \), we can see that this property holds for all \(x_0 \in K\), and not only for points contained in \(\Sigma \).
We have a family of lower semi-continuous functions defined on \(x\in K\)
Take the supremum of this family with respect to the index R. This is again a lower semi-continuous function with finite values, since the limiting area ratio for every center is a fixed finite number. We apply the extreme value theorem for lower semi-continuous functions to this new function on the compact set K. This proves the proposition. \(\square \)
A neighborhood of each end can be parametrized as in Proposition 2.9. By Huber’s theorem, the complement of these neighborhoods is contained inside some compact set \(K \subset {\mathbb {R}}^3\). By Proposition 2.10, we know that the area ratios are bounded for balls centered in this region. We now consider points \(x \in {\mathbb {R}}^3 {\setminus } K\). We know that if \(x \in \Sigma {\setminus } K\) and \(C_x(B_r(x) \cap \Sigma )\) is the connected component of \(B_r(x) \cap \Sigma \) containing x, then there exists a uniform constant \(C_2 > 0\) such that
and thus,
For a general point \(x \in {\mathbb {R}}^3 \setminus K\), we consider the set \(\{x_1, \ldots , x_d\}\), which is the nearest point projection to the d ends of the surface \(\Sigma \). Then,
The theorem of Hartman, Theorem 2.7, implies that there is a constant \(C_3 > 0\) depending on \(C_1\) and \(C_2\) such that
Combining the above bound with Proposition 2.10 proves a uniform bound on area ratios.
Corollary 2.11
There exists \(D >0\) such that
3 Blowing down
In this section, we prove that each blow-down sequence of \(\Sigma \) has a subsequential \(C^1_{loc}\)-limit.
Lemma 3.1
Let \(\Sigma \) be a translating end with finite total curvature. For every sequence \(\lambda _i \rightarrow 0\) there is a subsequence \({\lambda _i}_j \rightarrow 0\) such that the \(C^1_{loc}\)-limit of the rescalings \({\lambda _i}_{j}\Sigma \) in \({\mathbb {R}}^3 \setminus \{0\}\) is a plane \(\Pi \) that is parallel to V.
The central tool that we will use to prove this lemma is the following graphical decomposition lemma due to L. Simon, [22, Lemma 2.1]. We restate the version of the lemma given in [12] here for convenience.
Theorem 3.2
(Simon’s Lemma on \(|A|^2\)) For each \(\beta > 0\), there is a constant \(\epsilon _0 = \epsilon _0(\beta )\) such that if \(\Sigma \) is a smooth 2-manifold properly embedded in \(B_R \subset {\mathbb {R}}^3\) and
then there are pairwise disjoint closed disks \({\bar{P}}_1, \ldots , {{\bar{P}}}_N\) in \(\Sigma \cap B_R\) such that
and for any \(S \in [R/4, R/2]\) such that \(\Sigma \) intersects \(\partial B_S\) transversally and \(\partial B_S \cap \bigcup _m \bar{P}_m = \emptyset \), we have
where each \(D_i\) is an embedded disk. Furthermore, for each \(D_i\), there is a 2-plane \(L_i \subset {\mathbb {R}}^3\), a simply-connected domain \(\Omega _i \subset L_i\), disjoint closed balls \({{\bar{B}}}_{i,p} \subset \Omega _i\), \(p=1,\ldots , p_i\) and a function
such that
and
Roughly speaking, this lemma tells us that a surface of small total curvature contained inside a ball can be expressed as the union of disks that are graphical away from a small pathological set of discs \(\{P_i\}\), which we call “pimples." We recall that Simon states on p. 289 of [22] that each the boundary of each disk \(D_i\) is a graphical curve contained in \(\partial B_S \cap \Sigma \). In particular, this tells us a) that the \(D_i\) can be taken to be disjoint (they cannot be connected by a pimple \(P_m\), as these are all topological disks) and b) that if we assume \(0 \in \Sigma \subset {\mathbb {R}}^3\), then the connected component of \(\Sigma \cap B_S(0)\) containing 0 is contained in a neighborhood of the cone
Lemma 3.3
Let \(\epsilon ,R>0\) be given, and let \(\Sigma \) be a complete embedded translator, and select a point \(x \in \Sigma \) such that
Let \(\Sigma _x\) be the connected component of \(\Sigma \cap B_S(x)\) containing x (where S is as in Theorem 3.2) and consider the collection of pimples \({\bar{P}}_m \subset \Sigma \). Then there exists \(S' \in [R/8, R/16]\) such that \(\Sigma \cap B_{S'}\) is the graph of a function with gradient bounded by \(C\epsilon ^\frac{1}{6}\), defined on a plane \(\Pi \) parallel to the direction of motion, V.
Proof
Away from the pimples \(\{P_m\}\), the component \(\Sigma _x\) is the graph of a function with small gradient over a plane, which we denote \(L_x\). By Corollary 2.6, \({\textbf{n}}(x) \cdot V = O(|x|^{-1/2})\). Since
we can take \(L_x\) to be a plane \(\Pi \) that is parallel to V. Let \(\pi : {\mathbb {R}}^3 \rightarrow \Pi \) be the standard orthogonal projection map. Now, consider the following cone:
By the graphical decomposition lemma, \(\Sigma _x\) is contained in a neighborhood of \(X_\epsilon (\Pi ,x)\) with radius \(C\epsilon ^{1/2}R\):
Let \(D_s\) denote the disk centered at x of radius s in the plane \(\Pi \). This boundedness of \(\Sigma _x\) ensures that for sufficiently small \(\epsilon >0\), the intersections \(\pi ^{-1}(\partial D_s) \cap \Sigma _x\) are compact and do not intersect the boundary \(\partial \Sigma _x\) for all \(s \in [R/4,R/8]\). By the diameter bounds on the pimples and the transversality theorem, there is a number \(S' \in [R/4,R/8]\) such that \(\pi ^{-1}(\partial D_{S'}) \cap \{P_m\} = \emptyset \) and \(\pi ^{-1}(\partial D_{S'})\) intersects \(\Sigma _x\) transversely. By Theorem 3.2, this intersection is a single graphical curve \(\eta \) over \(\partial D_{S'}\) that bounds a disk, \(\pi ^{-1}(D_{S'}) \cap \Sigma \).
We now show that the surface given by \(\pi ^{-1}(D_{S'}) \cap \Sigma \) is a graph over \(\Pi \). In order to prove this, we adapt the Alexandrov moving plane method of Schoen for minimal surfaces ([4, Theorem 1.29] and [20, Theorem 1]). This has been previously done for translators in [15]. \(\square \)
Theorem 3.4
(Method of Moving Planes) Let \(\Omega \subset \Pi \) be an open set with \(C^1\) boundary and let \(\{\sigma _i\} \subset {\mathbb {R}}^3\) be simple closed curves each of which are graphs over distinct components of \(\partial \Omega \) with bounded slope. Further assume that for any point \(x \in \sigma _i \subset \Sigma \), the tangent plane to \(\Sigma \) is well defined and does not contain the vertical normal vector \(e_3\). Then any translator \(\Sigma \subset {\mathbb {R}}^3\) contained in \(\Omega \times {\mathbb {R}}\) with \(\partial \Sigma = \cup _i \sigma _i\) must be graphical over \(\Omega \).
Proof
Let \(\Pi \) be spanned by unit vectors \(e_1, e_2\) and let the normal direction be \(e_3\). Given the plane \(\{x_3 = t\}\), \(\Sigma \) is divided into the portions \(\Sigma ^+_t\) above and \(\Sigma ^-_t\) below the plane. We reflect \(\Sigma ^+_t\) below the plane to obtain a new translator \({{\tilde{\Sigma }}}^+_t\) below the plane. Note that because V is contained in \(\Pi \), reflection in \(\Pi \) preserves the translator equation. We decrease t until we encounter the first point p where (a)\(T_p\Sigma \) contains the vector \(e_3\) or (b) \({{\tilde{\Sigma }}}^+_t\) and \(\Sigma ^-_t\) have an interior point of contact. Let the critical height t be called \(t_0\). Suppose that (a) occurs–this means that the tangent planes \(T_p \tilde{\Sigma }^+_{t_0}\) and \(T_p \Sigma ^-_{t_0}\) coincide and we may apply the maximum principle, Corollary 2.2, to show that \(\Sigma \) must have a reflection symmetry through \(\{x_3 = t_0\}\). This contradicts the graphicality of the boundary unless \(\Sigma \) coincides with \(\{x_3 = t_0\}\).
If \(\Sigma \) is not one-to-one (i.e. \(t_0\) exists) and case (a) does not occur, then case (b) must occur. If there is a first interior point of contact, we may apply Corollary 2.2 directly to show that \(\Sigma \) has a reflection symmetry through \(\{x_3 = t_0\}\). This is a contradiction, and thus neither case (a) nor case (b) occurs. Because \(\partial \Sigma \) is a disjoint union of graphs with bounded slope over disjoint planar curves, there is no boundary point of contact. Thus, the projection of \(\Sigma \) to \(\Pi \) is one-to-one and \(\Sigma \) is a graph. \(\square \)
If we let \(\Omega = D_{S'} \subset \Pi \) and \(\sigma = \pi ^{-1}(\partial D_{S'}) \cap \Sigma \), then \(\pi ^{-1}(D_{S'}) \cap \Sigma \) clearly satisfies the conditions of Theorem 3.4 and is a graph over \(D_{S'}\). Furthermore, we know from the graphical decomposition lemma, Theorem 3.2, that \(|Du|_\eta | \le C\epsilon ^\frac{1}{6}\). By Lemma 2.3, the weak maximum principle for derivatives, \(\pi ^{-1}(D_{S'}) \cap \Sigma \) can be written as the graph of a function u defined on \(D_{S'} \subset \Pi \) with \(|Du|\le C\epsilon ^\frac{1}{6}\). This completes the proof of the lemma. \(\square \)
Given some \(\epsilon >0\), we can find \(R_\epsilon >0\) such that
and \(\Sigma \setminus B_{R_\epsilon }\) decomposes into disjoint annular ends. Given one of these ends, \(\Sigma _i\), we wish to glue a disk with small total curvature to the inner boundary. The resulting surface \(\Sigma _i'\) will be a topological disk without boundary to which we may apply Simon’s Lemma (Theorem 3.2). To this end, for each \(R_\epsilon \), we find a cylindrical curve with special properties that will allow us to carry out the gluing construction.
Lemma 3.5
Given \(\epsilon >0\) and \(R_\epsilon > 0\) as above, there exists a plane \(\Pi \) such that \(V \in \Pi \), a radius \(\rho >0\) such that \(\pi (\Sigma \cap B_{R_\epsilon }) \subset D_\rho \subset \Pi \), and a graphical curve \(\Gamma \subset \Sigma \) over \(\partial D_{\rho } \subset \Pi \) such that
Proof
By Corollary 2.6, we may choose \(R_\epsilon \) large enough that \({\textbf{n}}\cdot V < C\epsilon ^\frac{1}{6}\) in \(\Sigma {\setminus } B_{R_\epsilon }\). Let \(f(x) = |x|\). The norm of the tangential gradient \(|\nabla ^{\Sigma } f|\) is bounded by 1. The coarea formula says that
Note that by Hölder’s inequality and the assumed area bounds
There exists some \(R \in (2R_\epsilon , 3R_\epsilon )\) such that
By embeddedness, we may assume that \(\partial B_R\) intersects \(\Sigma \) transversely and \(\gamma = \partial B_{R} \cap \Sigma \) is a closed curve. From the inequality (3.3), the normal vector of \(\Sigma \) has very small oscillation on the curve \(\gamma \) for sufficiently small \(\epsilon \). Thus, the curve \(\gamma \) is contained in a small graphical annular region with gradient bounded by \(C\epsilon ^{1/6}\). The radius around the graphical neighborhood of each point in \(\gamma \) is extended to R/8 by applying Lemma 3.3. Approximately, this tells us that \(\gamma \) is very close (on the order of \(C\epsilon ^{1/6}R\)) to the cross section of some translate of \(\Pi \) with the ball \(B_\rho \).
Ultimately, what we obtain from this argument is that the union of these neighborhoods of \(\gamma \) contains the graph of a function u defined on a planar annulus \(\Omega = D_{R/16 + \alpha }{\setminus } D_{R/32 + \alpha }\) with width R/32 and \(\alpha >0\). Note that we may choose \(R>R_\epsilon \) large enough that \(\pi (\Sigma \cap B_{R_\epsilon }) \subset D_{R/32} \subset \Pi \), where \(\pi \) is orthogonal projection to \(\Pi \).
Assume that \(0 \in \Pi \) and let \(g(x) = |\pi (x)|\) for all \(x \in {\mathbb {R}}^3\). The coarea formula gives
Thus, there exists \(\rho \in (R/32 + \alpha , R/16 + \alpha )\) such that
where we have used the fact that \(|\nabla ^{\Sigma } g| \le 1\). Furthermore, by construction, \(\rho \le 17R/16\). Thus,
Note that \(C>0\) is an absolute constant that does not depend on \(R, R_\epsilon ,\) or \(\epsilon \). Letting the curve \(\{g = \rho \}\) equal \(\Gamma \) completes the proof of the lemma. \(\square \)
In the proof of Lemma 3.5, \(\Gamma \) is a graph over \(\partial D_\rho \subset \Pi \) and is contained in the graph of a function u, defined over an annulus \(\Omega \) such that \(\partial D_\rho \subset \Omega \). We now cut out the interior region in \(\Sigma \) bounded by \(\Gamma \), leaving only an annular end with total curvature bounded by \(\epsilon ^2\). We will appeal to the following lemma proved by L. Simon in [22] to find a candidate disk with small total curvature and boundary equal to \(\Gamma \) to replace the excised region.
Lemma 3.6
[22, Lemma 2.2] Let \(\Sigma ^2 \subset {\mathbb {R}}^3\) be smooth embedded, \(\xi \in {\mathbb {R}}^n\), L a plane containing \(\xi \), \(u \in C^\infty (U)\) for some open \((L-)\)neighborhood U of \(L \cap \partial B_\rho (\xi )\), and
Also, let \(w \in C^\infty (L \cap {\bar{B}}_\rho (\xi ))\) satisfy
Then
where \(\Gamma = \text {graph}(u|L\cap \partial B_\rho (\xi ))\), A is the second fundamental form of \(\Sigma \), and \({\mathcal {H}}^1\) is 1-dimensional Hausdorff measure (i.e. arc-length measure) on \(\Gamma \); C is a fixed constant independent of \(\Sigma \), \(\rho \).
Note that the solution w exists and is unique [22], and that there is the following maximum principle for the biharmonic equation from [19].
Theorem 3.7
(Maximum Principle for the Biharmonic Equation) If \(\Delta ^2u = 0\) in D, a bounded Lipschitz domain in \({\mathbb {R}}^n\), and |Du| is continuous in \({\bar{D}}\), then there is a constant C that depends only on the Lipschitz character of D and independent of the diameter of D such that
Since \(||Du||_{L^\infty (\partial B_\rho (\xi ))} \le C\epsilon ^{1/6}\), Theorem 3.7 implies that \(||Du||_{L^\infty (B_\rho (\xi ))} \le C\epsilon ^{1/6}\), and thus there exists a uniform constant \(C>0\) not depending on R or \(\epsilon \) such that
Combining this estimate with (3.7) and Lemma 3.5, we obtain the desired bound
where C is independent of R and \(\epsilon \).
We attach the graph of w to the end of \(\Sigma \) bounded by \(\Gamma \). Simply joining these surfaces along \(\Gamma \) results in a \(C^1\) surface S, which does not satisfy the hypotheses of Theorem 3.2: a \(C^2\) surface is needed. To improve the regularity, we approximate the piecewise surface in the \(H^2\)-Sobolev norm by smooth functions.
Lemma 3.8
Given \(R>0\) as in Lemma 3.5 and a connected component of \(\Sigma \setminus R_\epsilon \), we can find a smooth topological disk \(\Sigma '\) such that \(\Sigma ' = \Sigma \) outside the ball \(B_{2R}\).
Proof
Take a small tubular neighborhood \({\mathcal {T}}(\Gamma )\) of \(\Gamma \) in S. On the outside of \(\Gamma \), \({\mathcal {T}}(\Gamma )\) is equal to the graph of u over the plane \(\Pi \). On the inside of \(\Gamma \), \({\mathcal {T}}(\Gamma )\) is equal to the graph of w over \(\Pi \). Let v be the \(C^1\) function over an annular domain \(V \subset \Pi \) containing \(\partial D_\rho \) such that \(\text {graph }v = {\mathcal {T}}(\Gamma )\).
First, we confirm that v is in \(W^{2,2}(V)\). Since \(v \in C^1(V)\), we need only find weak second derivatives. Notice that v is smooth away from \(\partial D_\rho \subset V\). We define \(D_{ij}v\) away from the measure zero set \(\partial D_\rho \):
Now, consider a test function \(\varphi \in C_c^\infty (V)\).
Since \(v \in C^1\), this is enough to show that the weak second derivatives we defined are valid and \(v \in W^{2,2}\). Note that we used (3.6) to get rid of the last term in the second line.
We approximate v in \(W^{2,2}(V)\) by smooth functions. Let \(\psi \) be a cutoff function that is uniformly equal to 1 in a neighborhood of \(\partial D_\rho \) and compactly supported in V. Let \((\psi v)_h\) be the regularization of \(\psi v\), with \(h>0\) chosen so that \((\psi v)_h\) is also compactly supported in V and
Then the function
is equal to v in a uniform neighborhood of the boundary \(\partial V\) and has \(||D^2 {{\tilde{v}}}||_{L^2(V)} < C\epsilon ^2\). Since \(|D{\tilde{v}}|\) is uniformly bounded, we have
Since \(\text {graph }{\tilde{v}}\) matches \(\Sigma \) in an open neighborhood of \(\partial V\), the surface obtained by joining them, \(\Sigma '\), is smooth and equal to \(\Sigma \) outside \(B_{2R}\). \(\square \)
Choose \(\epsilon > 0\) and let \(Q > 0\) be a sufficiently large radius. We now prove the following lemma for \(\Sigma '\). We assume that \(0 \in \Sigma '\).
Lemma 3.9
Away from the ball \(B_{C\epsilon ^{1/2}Q}(0)\), the surface \(\Sigma ' \cap B_{Q/8}(0)\) is the graph of a function u with gradient bounded by \(C\epsilon ^{1/6}\) over a plane \(\Pi \) parallel to V.
Proof
We apply Simon’s Lemma, Theorem 3.2, to \(\Sigma '\). Lemma 3.3 ensures that \(\partial B_S \cap \Sigma \) (where \(S \in [Q/4, Q/2]\)) is an embedded, closed graphical curve bounding a connected topological disk. Away from pimples, Simon’s Lemma tells us that \(\Sigma ' \cap B_S\) is the graph of a function u defined on a domain in \(\Pi \) with gradient bounded by \(C\epsilon ^{1/6}\). Let \(\pi : {\mathbb {R}}^3 \rightarrow \Pi \) be orthogonal projection and let \(R>0\) be as in Lemma 3.8. Let \(D_r \subset \Pi \) be a disk such that \(\pi (\Sigma ' \cap B_{2R}) \subset D_r\). By the diameter bounds (3.1), there exists \(s_1 \in [Q/4 - C\epsilon ^{1/2}Q, Q/4]\) and \(s_2 \in [r, r + C \epsilon ^{1/2}Q]\) such that \(\pi ^{-1}(\partial B_{s_1})\) and \(\pi ^{-1}(\partial B_{s_2})\) do not intersect the pimples and intersect \(\Sigma '\cap B_S\) transversely. We apply the Schoen/Alexandrov reflection method, Theorem 3.4, and the maximum principle, Lemma 2.3, as we did in Lemma 3.3 to show that the pimples lying between these cylinders are indeed graphical over \(\Pi \) with gradient bounded by \(C\epsilon ^{1/6}\). This completes the proof. \(\square \)
We can now prove the main result of this section, Lemma 3.1.
Proof of Lemma 3.1
Let us choose a sequence of annuli \(B_{m} \setminus B_{1/m}\), where \(m \in {\mathbb {N}}\), a sequence decreasing to zero \(\epsilon _j \rightarrow 0\), and a family of rescalings \(\lambda _i \Sigma '\), with \(\lambda _i \rightarrow 0\). Let \(\Sigma _j'\) be obtained for \(\epsilon = \epsilon _j\) by cutting out a high curvature region and pasting in a disk as above. Note that in the inequality
the constant C depends only on \(\beta \), and is independent of \(\epsilon _j\). Observe also that outside of some ball \(\Sigma _j' = \Sigma _k'\), for any \(j,k \in {\mathbb {N}}\).
Fix m and j. By Lemma 3.9, for sufficiently large values of i, \(\lambda _i \Sigma '\) can be written as a graph of a function over a plane \(\Pi _i\) parallel to V with \(C^1\)-norm bounded by \(C\epsilon _j^{1/6}\) in \(B_m {\setminus } B_{1/m}\). Un-fixing j, we see that by the compactness of the collection of planes \(\{\Pi \in \text {Gr}_{2,3}: V \in \Pi \}\), there exists a subsequence \(\lambda _{i_k}\rightarrow 0\) such that \(\lambda _{i_k} \Sigma '\) converges to a fixed plane \(\Pi \) inside \(B_{m} {\setminus } B_{1/m}\) in the \(C^1\)-norm.
Now, unfixing m, we take a further diagonal subsequence such that the rescalings of our designated end, \(\lambda _{i_k} \Sigma \), converge to \(\Pi \setminus \{0\}\) in the \(C^1_{loc}\) topology. This concludes the proof of Lemma 3.1. \(\square \)
Note that this blow-down limit is subsequential, and thus not necessarily unique. The problem arises from the fact that in Lemma 3.9, graphicality cannot be extended to a neighborhood of the origin with diameter proportional to the graphical radius. That is, the surface may be twisting and turning inside the ball \(B_{C\epsilon ^{1/6}Q}\) (in the notation of Lemma 3.9.) Thus, we must argue further in §4 to show that this asymptotic tangent plane is indeed unique. However, in the case that the translator \(\Sigma \) has only one end, this possibility does not present a serious difficulty: Theorem 1.2 is a quick corollary of Lemma 3.1.
Proof of Theorem 1.2
Let \(\{\lambda _i\Sigma \}\) be a blow-down sequence converging to \(\Pi \). Fix \(m \in {\mathbb {N}}\). Consider the sequence of annuli \(\Sigma \cap B_{\lambda _{i}^{-1}m} {\setminus } B_{\lambda _{i}^{-1}m^{-1}}\). Each of these can be written as the graph of a function \(u_i\) over P with gradient \(|Du_i| < C\epsilon _i^{1/6}\), where \(\epsilon _i \rightarrow 0\). Consider the curve \(\Sigma \cap \partial B_{\lambda _{i}^{-1}m}\) and its projection to an embedded Jordan curve in \(\Pi \), which we denote \(\sigma _i\). We take \(\Omega \) to be the open set in \(\Pi \) bounded by \(\sigma _i\) and apply the method of moving planes, Theorem 3.4 to determine that \(\Sigma \cap B_{\lambda _{i}^{-1},}\) is a graph over P. Then we apply the weak maximum principle, Theorem 2.3, to determine that this graph has gradient \(|Du| < C\epsilon _i^{1/6}\). As \(m,i \rightarrow \infty \), the sequence \(\Sigma \cap B_{\lambda _{i}^{-1}m}\) must be a sequence of graphical disks over \(\Pi \) with increasingly small gradient. Thus, \(\Sigma \) must be a plane. \(\square \)
4 Uniqueness of the tangent plane
In this section, we establish the uniqueness of the asymptotic tangent plane and the graphicality of the ends of \(\Sigma \). To prove this, we show that given two annuli in a convergent blow-down sequence, the “interstitial space" between them must in fact be graphical with small gradient over the limit plane.
Proposition 4.1
Given an end of the translator \(\Sigma \), the \(C^1_{loc}\)-limit in \({\mathbb {R}}^3 \setminus \{0\}\) of any blow-down sequence \(\{\lambda _i \Sigma \}\), \(\lambda _i \rightarrow 0\) is a unique plane \(\Pi \) parallel to V. Consequently, the ends of \(\Sigma \) can be written as graphs over \(\Pi \) outside of some ball \(B_{R_0} \subset {\mathbb {R}}^3\).
Proof
Let \(\epsilon >0\) and \(\Sigma '\) be the modified surface from the previous section: a complete embedded topological disk, equal to the translator \(\Sigma \) outside a ball \(B_{R}\) and with total curvature less than \(\epsilon ^2\). Consider a blow-down sequence \(\{\lambda _i \Sigma '\}\), with \(\lambda _i \rightarrow 0\) that converges to a plane \(\Pi \), and take \(\lambda _j > \lambda _{j+1}\). Let \(R>0\) be a large fixed radius, and let j be large enough that \(\Sigma ' \cap B_{\lambda _j^{-1}R} {\setminus } B_{\lambda _j^{-1}R^{-1}}\) and \(\Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}}\) can be written as graphs of functions \(u_j\) and \(u_{j+1}\) over annuli in \(\Pi \) with gradient bounded by \(C\epsilon ^{1/6}\). Let us also define the curves \(\gamma _j\) and \(\gamma _{j+1}\) which will denote the inner boundary \(\Sigma ' \cap \partial B_{\lambda _j^{-1}R^{-1}}\) and the outer boundary \(\Sigma ' \cap \partial B_{\lambda ^{-1}_{j+1}R}\) respectively.
If we project the space curves \(\gamma _j\) and \(\gamma _{j+1}\) to \(\Pi \) via the orthogonal projection map \(\pi : {\mathbb {R}}^3 \rightarrow \Pi \), we obtain simple closed planar curves \(\sigma _j = \pi (\gamma _j)\) and \(\sigma _{j+1} = \pi (\gamma _{j+1})\). Equivalently, \(u_j(\sigma _j) = \gamma _j\) and \(u_{j+1}(\sigma _{j+1})= \gamma _{j+1}\). Thus, \(\sigma _j\) and \(\sigma _{j+1}\) bound a large topological annulus \(\Omega \) in \(\Pi \). Let \({\textbf{n}}\) be the normal vector to \(\Pi \). Consider the solid cylinder \(\Omega \times {\textbf{n}}{\mathbb {R}}\). Suppose that \((\Sigma ' \cap B_{\lambda _{j+1}^{-1}R}{\setminus } B_{\lambda _j^{-1}R^{-1}}) \cap (\sigma _j \times {\textbf{n}}{\mathbb {R}}) = \gamma _{j}\). Then, \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\) is contained inside \(\Omega \times {\textbf{n}}{\mathbb {R}}\), and since the boundary curves \(\gamma _{j}\) and \(\gamma _{j+1}\) are graphs, we can apply the moving planes method, Theorem 3.4, to find that \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\) is a graph over \(\Omega \).
Suppose that \((\Sigma ' \cap B_{\lambda _{j+1}^{-1}R}) \cap (\sigma _j \times {\textbf{n}}{\mathbb {R}}) \supsetneq \gamma _{j}\), i.e. the surface turns back and intersects the cylinder of small radius. Consider the domain \({\mathcal {D}} = \textrm{int}(\sigma _j)\) in the plane \(\Pi \) such that \(\pi (\Sigma ' \cap B_R) \subset {\mathcal {D}}\) and \(D{\mathcal {D}}\) is bounded by the Jordan curve \(\sigma _j\). We separate this situation into two cases. These cases are illustrated in Figs. 1 and 2 in Appendix A.
Case 1: \(\Lambda := (\Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}) \cap ({\mathcal {D}} \times {\textbf{n}}{\mathbb {R}})\) is non-graphical or a multigraph over \(D_R\) in either of the connected components of \(({\mathcal {D}} \times {\textbf{n}}{\mathbb {R}}) {\setminus } B_{\lambda _{j}^{-1}R^{-1}}\). Without loss of generality, let us assume this occurs in the upper half space \(\Pi \times {\mathbb {R}}_{\ge 0}\). In this case, we may use a modified method of moving planes. Consider the surface \(\Sigma ' \cap B_{\lambda _{j+1}^{-1} R}\) (a topological disk) contained in the cylinder \(\text {int}(\sigma _{j+1}) \times {\textbf{n}}{\mathbb {R}}\) with boundary equal to \(\gamma _{j+1}\). If \((x_1,x_2)\) are coordinates in \(\Pi \) and \(x_3\) indicates height in \({\textbf{n}}{\mathbb {R}}\), we take the plane \(\{x_3= t\}\) parallel to \(\Pi \) and the associated surfaces \(\tilde{\Sigma '}_t^+\) and \({\Sigma '}_t^-\) as in the proof of Theorem 3.4.
Let h be the minimum height of \(\Lambda \) in the upper half space \(x_3 >0\). Note that
where we may assume without loss of generality that \(\lambda _j^{-1}\) is sufficiently large that the second inequality holds. The first inequality follows from repeated applications of Lemma 3.9, which tells us that once \(\Sigma '\) leaves the ball \(B_{\lambda _j^{-1}R^{-1}}\), it will never re-enter.
If a first point of interior tangency occurs, it must occur for \(t > h\). This means that it occurs outside of \(B_{R}\) and around this point of contact \(\tilde{\Sigma '}_t^+\) and \({\Sigma '}_t^-\) must satisfy the translator equation. Thus, the strong maximum principle applies. This is a contradiction, so the first point of contact must occur on the boundary curve \(\gamma _{j+1}\). However, \(\gamma _{j+1}\) is a graph over \(\Pi \), so there is no point of contact outside \(\{x_3 = t\}\) on the boundary. Thus, the orthogonal projection \(\pi (\Lambda )\) to \(\Pi \) must be one-to-one, so Case 1 cannot occur.
Case 2: \(\Lambda := (\Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}) \cap ({\mathcal {D}} \times {\textbf{n}}{\mathbb {R}})\) is a single-valued graph over U. Note that the plane \(\Pi \) is spanned by two orthogonal vectors \(\partial _{x_1} = V\) and \(\partial _{x_2}\) and is normal to the coordinate vector \(\partial _{x_3}\). Let us take the cross section of \(\Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}\) with respect to the plane spanned by \(\partial _{x_2}\) and \(\partial _{x_3}\) passing through the origin. Since the normal part of V has norm \(|V^\perp | = O(\varrho ^{-1/2})\) by Corollary 2.6, the intersection with this plane is transverse for sufficiently large values of \(\lambda _j^{-1}\). This intersection can be seen to have two connected components which can be distinguished by whether they intersect the inner boundary curve on the left or the right of the line \((x_2, x_3) \in \{0\} \times {\mathbb {R}}\). Without loss of generality, take the component that intersects \(\gamma _j\) on the left. This curve is an embedded curve with boundary in \(\gamma _j\) and \(\gamma _{j+1}\), which we henceforth denote by \(\eta \).
We now describe some properties of the curve \(\eta \). Let \(p_j\) and \(p_{j+1}\) be the unique intersection points of \(\eta \) with \(\gamma _j\) and \(\gamma _{j+1}\): these are the endpoints of \(\eta \). Let \(\ell \) be the length of \(\eta \). We parametrize \(\eta \) by arclength such that
By assumption, \(\eta \) crosses the line \(\{0\} \times {\mathbb {R}}\) exactly once. We wish to use this condition to determine whether \(\langle \eta '(\ell ), \partial _{x_2} \rangle \) is close to 1 or -1. First note that
is much longer than
We then consider the two cases (1) \(p_{j+1}\) is on the left of vertical axis \(\{0\} \times {\mathbb {R}}\) and (2) \(p_{j+1}\) is on the right of this axis. In case (1), \(\eta \) must cross \(\{0\} \times {\mathbb {R}}\) an even number of times, which cannot happen. Thus, (2) must hold. If \(\langle \eta '(s), \partial _{x_2} \rangle \approx -1\) on \(\eta \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}}\), integration tells us that \(p_{j+1}\) must be on the left of \(\{0\} \times {\mathbb {R}}\), which is impossible. Thus, \(\langle \eta '(\ell ), \partial _{x_2} \rangle \approx 1\) in all situations. In particular, \(\langle \eta '(\ell ), \eta '(0) \rangle \approx -1\).
Let \(\Sigma ' \cap B_{\lambda _{j}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}\) and \(\Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}}\) be parametrized by
and
respectively. The two surfaces are oriented by the respective 2-vectors
Since these two surfaces are graphical annuli with very small gradient, their orientation 2-vectors are close to
respectively. Note that at all points \(\eta (s)\), V is “almost" a tangent vector to \(\Sigma \) perpendicular to \(\eta '(s)\), by Corollary 2.6. Since \(\langle \eta '(\ell ), \eta '(0) \rangle \approx -1\), we can deduce that
for any \(p \in \Sigma ' \cap B_{\lambda _{j}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}\) and \(q \in \Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}}\). Equivalently, the normal vectors to the two annuli determine opposite orientations with respect to a fixed frame on \({\mathbb {R}}^3\). The crucial consequence of this fact is that the geodesic curvatures along curves “nearby" \(\gamma _j\) and \(\gamma _{j+1}\) will have the same sign and be approximately equal to \(2\pi \). We demonstrate this precisely in the remainder of the proof.
Next, we show that this change in orientation causes the total curvature to be large. By the same reasoning as in (3.4), we can find curves \(\Gamma _j\) and \(\Gamma _{j+1}\) in \(\Sigma ' \cap (B_{\lambda _{j}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\) and \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}})\) respectively such that
and such that
We consider the annular subset of \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\) bounded by the curves \(\Gamma _j\) and \(\Gamma _{j+1}\), which we call \(S(\Gamma _j, \Gamma _{j+1})\). We apply the Gauss-Bonnet theorem:
where \(\kappa _g\) is the geodesic curvature, \(M_1\) is equal to the number of connected components, g is the genus, and \(M_0\) is equal to the number of boundary components. Substituting \(M_1 = 1, M_0 = 2\) and \(g = 0\), we obtain
\(\square \) \(\square \)
Claim 4.2
Proof
We apply similar reasoning to a proof on p.294-5 of [22]. We parametrize \(\Gamma _j\) and \(\Gamma _{j+1}\) as follows.
and
where \(\theta \in [0,2\pi )\) and \(\Pi \) is identified with \({\mathbb {C}}\). We calculate the integral
Differentiating (4.1) and (4.2), and combining with the above calculation, we obtain that the total curvature vector \(\vec {\kappa }\) can be writted in the following form:
where E is a vector field on \(\Gamma \) such that \(\int _{\Gamma } |E| < C \epsilon ^{1/6}\) and \(\nu \) is the inward pointing unit normal to \(\Gamma \) with respect to the surface \(S(\Gamma _j, \Gamma _{j+1})\). Since
for any \(p \in \Sigma ' \cap B_{\lambda _{j}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}}\) and \(q \in \Sigma ' \cap B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j+1}^{-1}R^{-1}}\), the geodesic curvatures \((\kappa _j)_g\) and \((\kappa _{j+1})_g\) have the same sign. We calculate
This concludes the proof of the claim. \(\square \)
Claim 4.2 and the Gauss-Bonnet Theorem imply that
for some small \(\delta >0\). Given the assumption of small total curvature, this is contradiction. Thus, Case 2 does not occur and \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\) must be the graph of a function \(w_j\) over \(\Omega \subset \Pi \). Since \(|Dw_j| < C\epsilon ^{1/6}\) on \(\gamma _j\) and \(\gamma _{j+1}\), the weak maximum principle implies that \(|Dw_j|< C\epsilon ^{1/6}\) on \(\Omega \).
Now, consider two blow down sequences \(\{\mu _i \Sigma \}\) and \(\{\lambda _j \Sigma \}\), with \(\lambda _j, \mu _i \rightarrow 0\) and \(\{\lambda _j \Sigma \}\) has blow-down limit equal to the plane \(\Pi \). For any sufficiently large \(\mu _i\), up to a subsequence of \(\{ \lambda _j \}\), we can find \(\lambda _j> \mu _i > \lambda _{j+1}\). The annular set \(\Sigma ' \cap (B_{\mu _i^{-1} R} {\setminus } B_{\mu _i^{-1} R^{-1}})\) is contained in the larger annulus \(\Sigma ' \cap (B_{\lambda _{j+1}^{-1}R} {\setminus } B_{\lambda _{j}^{-1}R^{-1}})\), which must be a graph over \(\Pi \) with gradient bounded by \(C\epsilon _j^{1/6}\). Now that \(\Sigma ' \cap (B_{\mu _i^{-1} R} {\setminus } B_{\mu _i^{-1} R^{-1}})\) can be written as a graph with gradient bounded by \(C\epsilon _j^{1/6}\) over \(\Pi \), we see that in fact the blow-down limit of \(\{\mu _i \Sigma \}\) must be the plane \(\Pi \) as well.
In fact, this tells us that the entire end can be written as the graph of of a function u over \(\Pi \) with \(|u| = o(\varrho )\) and \(|Du| = o(1)\). That each end is a graph over the same plane \(\Pi \) is a consequence of embeddedness. \(\square \)
5 Strong asymptotics of the ends
In this section, we obtain upper bounds for the decay of an end of \(\Sigma \) to its asymptotic plane. We begin by using a barrier argument to obtain unidirectional exponential decay of the ends. This is stated precisely in the following proposition:
Proposition 5.1
Let \(\Sigma _0\) be an end of a translator \(\Sigma \subset {\mathbb {R}}^3\) that translates with unit speed in the \(x_1\)-direction and has finite total curvature. There exists a function \(u: {\mathbb {R}}^2 {\setminus } B_R \rightarrow {\mathbb {R}}\) whose graph represents \(\Sigma _0\) and whose magnitude decays uniformly at a rate \(O(e^{-\alpha x_1})\) for any positive \(\alpha < 1/2\) as \(x_1 \rightarrow \infty \).
Proof
To prove this statement, we apply a barrier argument to the \(x_1\)-derivative of u, \(D_{1}u\). We set \(v:= D_{1}u\). By the proof of Lemma 2.3, \(v = D_{1}u\) satisfies a differential equation of the form \(Lv = 0\), where the differential operator \(L = a_{jk}D_{jk} + b_j D_j\) has coefficients given by
We now calculate \(L(v^2)\).
Thus,
We now choose our barrier function, \(e^{-\frac{x_1}{2}}\). We calculate \(L\big (e^{-\frac{x_1}{2}}\big )\):
We calculate the coefficients \(a_{11}\) and \(b_1\) here:
We now rely on the fact that \(||Du||_{C^{k}} = o(1)\) as \(\rho \rightarrow \infty \) in order to estimate the lower order terms for large values of \(x_1\).
for \(x_1\) sufficiently large. Let \(M>0\) be such that the previous inequality holds for \(x_1 \ge M\). Let C be such that \(Ce^\frac{-M}{2} > D_1u\) on the line \(\{x_1 = M\}\). Note that such a C must exist, since \(|Du| = o(1)\) as the radius approaches infinity, and is in particular uniformly bounded. Now for some \(\epsilon > 0\), define the function \(\rho _\epsilon = Ce^{-\frac{x_1}{2}} + \epsilon \). Since there are no order zero terms, \(L\rho _\epsilon < 0\) for \(x_1 \ge M\). Thus,
Consider the semicircular domains \({\mathcal {D}}_S \subset {\mathbb {R}}^2\) parametrized by \(S>0\) defined by the intersection of the balls \(D_S(p)\), of radius S and centered around \(p = (x_1,x_2) = (M, 0)\), and the upper half-plane \(\{x_1 > M\}\). Since \(|Du| = o(1)\) as the radius approaches infinity, for each \(\epsilon >0\), there exists some \(S>0\) such that \(\rho _\epsilon > v^2\) on the boundary \(\partial {\mathcal {D}}_S\). The weak maximum principle [7, Theorem 3.1] tells us that \(\rho _\epsilon > v^2\) on \({\mathcal {D}}_S\). Sending \(S \rightarrow \infty \) and then \(\epsilon \rightarrow 0\), we see that \(v^2 < C\epsilon ^{-\frac{x_1}{2}}\) in the upper half-plane.
This in turn implies that \(|D_1u| \le Ce^{-\frac{x_1}{4}}\) on \(\{x_1 \ge M\}\). Integrating along rays in the direction of motion, we can conclude that u approaches a limit along each ray parallel to the direction of motion. Fix real numbers y and \({\hat{y}}\) and suppose that
Since \(|Du| = o(1)\), there exists a radius R such that on \({\mathbb {R}}^2 {\setminus } B_R\),
Thus, for sufficiently large values of \(x_1\), \(2|u(x_1,y) - u(x_1, {\hat{y}})| < |K-{\hat{K}}|\) only if \(|K-{\hat{K}}| > 0\). This is a contradiction, so \(K = {\hat{K}}\). Now, fix \(x_2 = y\), for any \(y \in {\mathbb {R}}\). The following formula holds:
By our bound \(|D_1u| \le Ce^{-\frac{x_1}{4}}\),
and
Since \(y \in {\mathbb {R}}\) is arbitrary, this shows that \(K \pm Ce^{-\frac{x_1}{4}}\) are upper and lower barriers for u, respectively. In particular, u decays uniformly along rays parallel to \(\nabla x_1\). \(\square \)
Proposition 5.1 allows us to use grim hyperplanes and tilted grim hyperplanes as barriers for the ends. We obtain a number of immediate corollaries from this observation.
Corollary 5.2
Along any ray in the coordinate plane P not pointing in the direction \(-V\), the magnitude of the graph u decays exponentially.
Proof
Immediate from comparison to tilted grim hyperplanes. \(\square \)
Corollary 5.3
Each end is represented by the graph of a function u that is uniformly bounded.
Proof
This follows from comparison to grim hyperplanes above and below the top and bottom asymptotic planes, respectively. \(\square \)
Corollary 5.4
Any asymptotic plane of the translator \(\Sigma \) must have distance less than \(\pi \) from another asymptotic plane of \(\Sigma \).
Proof
If not, we could place a grim hyperplane between these two asymptotic planes, and obtain an interior point of contact with \(\Sigma \). \(\square \)
In order to improve on Proposition 5.1 and its consequences, we introduce another barrier,
Here \(K_0(x)\) denotes the modified Bessel function of the second kind, with parameter 0, i.e. the solution to the modified Bessel’s equation,
The key point is that the decay and uniform boundedness of u established in Proposition 5.1 allow us to find domains in which \(\phi \) acts as a barrier for \(u^2\).
Proposition 5.5
Let \(\Sigma _0\) and \(u: {\mathbb {R}}^2 {\setminus } B_R \rightarrow {\mathbb {R}}\) be as in Proposition 5.1.
where \(\alpha > 4\). In particular, \(u(x) = O\big (r^{-\frac{1}{4(1+\delta )}}\big )\), for \(\delta > 0\) as \(r \rightarrow \infty \).
Proof
We first apply the linear operator \({\mathcal {L}} = \Delta + D_{1}\) to \(\phi \).
We evaluate each summand separately.
by the definition of the modified Bessel function \(K_0\). We now evaluate
Now we calculate the final term.
Combining these results, we obtain
The asymptotic expansion at infinity of \(K_0'(x)\) is as follows:
Thus, for sufficiently large r, \(K_0'(r/2)\) is negative. Thus,
We now consider the operator Q defined in (2.1), where we set \((v_1, v_2, v_3) = (1,0,0)\).
where \((x, u, Du) = (x, z, p)\) and
We know that \(\phi \) has the following asymptotic expansion
Consequently, we know that for sufficiently large r, the partial derivatives \(D_i\phi \) are bounded above by a multiple of \(r^{-5/4}\). Thus,
as \(r \rightarrow \infty \). We conclude that \(Q\phi < 0\). Consider the family of functions
where \(C_1, C_2>0\) are fixed constants which depends on the upper bound of the function u in the annulus \({\mathbb {R}}^2 \setminus B_{R_0}\). A quick calculation yields
This expression is clearly negative for \(x_1 \ge -N\).
Finally, we calculate \(Q(u^2)\), where u satisfies the translator Eq. (2.1), i.e. \(Qu =0\).
Now that we know that \(Q(\phi _{\epsilon , N} - u^2) \le 0\), we may apply the following quasilinear maximum principle: \(\square \)
Theorem 5.6
[7, Theorem 10.1] Let \(u, v \in C^0({\bar{\Omega }})\cap C^2(\Omega )\) satisfy \(Qu \ge Qv\) in \(\Omega \), \(u \le v\) on \(\partial \Omega \), where
-
(i)
Q is locally uniformly elliptic with respect to either u or v;
-
(ii)
the coefficients \(a_{ij}\) are independent of z;
-
(iii)
the coefficient \(b(x,p) = b_j(x,p)p_j\) is non-increasing in z for each \((x,p) \in \Omega \times {\mathbb {R}}^n\);
-
(iv)
the coefficients \(a_{ij}, b\) are continuously differentiable with respect to the p variables in \(\Omega \times {\mathbb {R}}\times {\mathbb {R}}^n\).
It then follows that \(u \le v\) in \(\Omega \).
It is clear that for sufficiently large \(R_0\), conditions (i)-(iv) are satisfied by \(u^2\) and \(\phi \) on the annulus \({\mathbb {R}}^2 {\setminus } B_{R_0}\). Consider the large square \(S_N\) with corners \((N,N), (N,-N), (-N,N), (-N,-N)\) and \(N \ge R_0 > 0\). Let \(\Omega _N = S_N {\setminus } B_{R_0}\). Set \(C_1 > 0\) so that \(C_1\phi |_{\partial B_{R_0}} \ge ||u^2||_{L^\infty ({\mathbb {R}}^2 {\setminus } B_{R_0})}\) and set \(C_2 > ||u^2||_{L^\infty ({\mathbb {R}}^2 \setminus B_{R_0})}\). By Proposition 5.1, Corollary 5.2, and Corollary 5.3, \(\phi _{\epsilon , N} > u^2\) on \(\partial \Omega _N\) for sufficiently large N and some arbitrary small \(\epsilon >0\). On the edge from \((N, -N)\) to \((-N,-N)\), \(x_1 \equiv -N\) and \(\phi _{\epsilon , N}> C_2 > u^2\). The other three edges lie in a sector not containing \(-V\), so by Corollary 5.2, for sufficiently large values of N, \(u^2 < \epsilon \) on these edges. Thus, given an \(\epsilon \), for sufficiently large N, \(\phi _{\epsilon , N} > u^2\) on \(\partial \Omega _N\).
Having chosen \(R_0 > 0\) sufficiently large, on the domains \(\Omega _N\), we have \(Q(\phi _{\epsilon , N}) < 0\), so we may apply [7, Theorem 10.1] and obtain that \(\phi _{\epsilon ,N} - u^2 \ge 0\) on \(\Omega _N\). Sending \(N \rightarrow \infty \), we see that \(C_1\phi + \epsilon \ge u^2\) on \({\mathbb {R}}^2 \setminus B_{R_0}\). Since \(\epsilon >0\) is arbitrary, we send \(\epsilon \) to zero and conclude that \(C_1\phi \ge u^2\).
We finish the proof of the proposition by observing that all of the above arguments apply when we select \(\phi = r^{2/\alpha } e^{-x_1/2} K_0(r/2)\) and \(\alpha \in (4,\infty )\) is an arbitrary constant. \(\square \)
Proof of Theorem 1.3
The theorem immediately follows from Proposition 4.1 and Proposition 5.5. \(\square \)
Data Availability Statement:
Data sharing not applicable to this article as no datasets were generated or analysed during the current study.
References
Angenent, S., Velázquez, J.J.L.: Asymptotic shape of cusp singularities in curve shortening. Duke Math. J. 77(1), 71–110 (1995)
Angenent, S., Velázquez, J.J.L.: Degenerate neckpinches in mean curvature flow. J. Reine Angew. Math. 482, 15–66 (1997)
Brendle, S., Choi, K.: Uniqueness of convex ancient solutions to mean curvature flow in \({{\mathbb{R}}}^3\). Invent. math. 217, 35–76 (2019)
Colding, T.H., Minicozzi II, W.P.: A Course in Minimal Surfaces, Graduate Studies in Mathematics 121, American Mathematical Society, (2011)
Dávila, J., del Pino, M., Nguyen, X.H.: Finite topology self-translating surfaces for the mean curvature flow in \({{\mathbb{R}}}^3\). Adv. Math. 320, 624–729 (2017)
Ecker, K.: On regularity for mean curvature flow of hypersurfaces. Calc. Var. Partial Differ. Equ. 3, 107–126 (1995)
Gilbarg, D., Trudinger, N.: Elliptic Partial Differential Equations of Second Order. Springer Verlag, Berlin (2001)
Hamilton, R.: Harnack estimate for the mean curvature flow. J. Differ. Geom. 41(1), 215–226 (1995)
Hoffman, D., Karcher, H.: Complete embedded minimal surfaces of finite total curvature. In: Geometry, V. (ed.) Encyclopaedia of Mathematical Sciences, pp. 5–93. Springer, New Jersey (1997)
Hoffman, D., Martín, F., White, B.: Scherk-like translators for mean curvature flow. (2018) arXiv:1903.04617,
Huisken, G., Sinestrari, C.: Convexity estimates for mean curvature flow and singularities of mean convex surfaces. Acta Math. 183(1), 45–70 (1999)
Ilmanen, T.: Singularities of mean curvature flow of surfaces, http://www.math.ethz.ch/~ilmanen/papers/sing.ps
Li, P., Tam, L.-F.: Complete surfaces with finite total curvature. J. Diff. Geom. 33(1), 139–168 (1991)
Mantegazza, C.: Lecture Notes on Mean Curvature Flow Progress in Mathematics. Springer: New York. pp 290 (2011)
Martin, F., Savas-Halilaj, A., Smoczyk, K.: On the topology of translating solitons of the mean curvature flow. Calc. Var. Partial Differ. Equ. 54(3), 2853–2882 (2015)
Müller, S., Šverák, V.: On surfaces of finite total curvature. J. Diff. Geom. 43(2), 229–258 (1995)
Nguyen, X.H.: Translating tridents. Commun. Partial. Differ. Equ. 34(1–3), 257–280 (2009)
Pérez, J., Ros, A.: Properly embedded minimal surfaces with finite total curvature. In: The Global Theory of Minimal Surfaces in Flat Spaces Lecture Notes in Mathematics, pp. 17–75. Springer, New York (2002)
Pipher, J., Verchota, G.: A maximum principle for biharmonic functions in Lipschitz and \(C^1\) domains. Comment. Math. Helv. 68(1), 385–414 (1993)
Schoen, R.: Uniqueness, symmetry, and embeddedness of minimal surfaces. J. Diff. Geom. 18(4), 791–809 (1983)
Shiohama, K.: Total curvatures and minimal areas of complete open surfaces. Proc. Am. Math. Soc. 94, 310–316 (1985)
Simon, L.: Existence of surfaces minimizing the Willmore functional. Commun. Anal. Geom. 1, 281–326 (1993)
Smith, G.: On complete embedded translating solutions of the mean curvature flow that are of finite genus. (2015) arXiv:1501.04149
Spruck, J., Xiao, L.: Complete translating solitons to the mean curvature flow in \({{\mathbb{R}}}^3\) with nonegative mean curvature. Am. J. Math. 142(3), 993–1015 (2020)
Wang, X.-J.: Convex solutions to the mean curvature flow. Ann. Math. 173, 1185–1239 (2011)
Acknowledgements
I would like to thank Bing Wang for suggesting this problem. I would also like to thank Bing Wang and Sigurd Angenent for many helpful conversations and their careful feedback on the drafts of this paper. I am also very grateful to Sigurd Angenent for his invaluable guidance in the writing of §5, especially for explaining the importance of the Bessel functions and sharing his overall wisdom around asymptotic formulae. Lastly, I’d like to thank Professor Yuxiang Li for pointing out that conditions on the area ratios could be dropped and suggesting the proof of Proposition 2.10.
Funding
The author was partially supported by a tuition scholarship from the Graduate School of the University of Wisconsin-Madison.
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Andrea Mondino.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Khan, I. The structure of translating surfaces with finite total curvature. Calc. Var. 62, 104 (2023). https://doi.org/10.1007/s00526-023-02441-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00526-023-02441-6