Abstract
A two-scale model is developed for fluid flow in a deforming, unsaturated and progressively fracturing porous medium. At the microscale, the flow in the cohesive crack is modelled using Darcy’s relation for fluid flow in a porous medium, taking into account changes in the permeability due to the progressive damage evolution inside the cohesive zone. From the micromechanics of the flow in the cavity, identities are derived that couple the local momentum and the mass balances to the governing equations for an unsaturated porous medium, which are assumed to hold on the macroscopic scale. The finite element equations are derived for this two-scale approach and integrated over time. By exploiting the partition-of-unity property of the finite element shape functions, the position and direction of the fractures are independent from the underlying discretization. The resulting discrete equations are nonlinear due to the cohesive crack model and the nonlinearity of the coupling terms. A consistent linearization is given for use within a Newton–Raphson iterative procedure. Finally, examples are given to show the versatility and the efficiency of the approach. The calculations indicate that the evolving cohesive cracks can have a significant influence on the fluid flow and vice versa.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abellan MA and Borst R (2006). Wave propagation and localisation in a softening two-phase medium. Comput Methods Appl Mech Eng 195(37–40): 5011–5019
Babuska I and Melenk JM (1997). The partition of unity method. Int J Numer Methods Eng 40: 727–758
Belytschko T, Moës N, Usui S and Parimi C (2001). Arbitrary discontinuities in finite elements. Int J Numer Methods Eng 50(4): 993–1013
Biot MA (1965). Mechanics of incremental deformations. Wiley, Chichester
Black T and Belytschko T (1999). Elastic crack growth in finite elements with minimal remeshing. Int J Numer Methods Eng 45: 601–620
Boone T and Ingraffea AR (1990). A numerical procedure for simulation of hydraulically-driven fracture propagation in poroelastic media. Int J Numer Anal Methods Geomech 14(2): 27–47
de Borst R, Remmers JJC and Needleman A (2006). Mesh-independent numerical representations of cohesive-zone models. Eng Fracture Mech 173(2): 160–177
de Borst R, Réthoré J and Abellan MA (2006). A numerical approach for arbitrary cracks in a fluid-saturated medium. Arch Appl Mech 75: 595–606
Camacho GT and Ortiz M (1996). Computational modeling of impact damage in brittle materials. Int J Solids Struct 33: 1267–1282
Huyghe HM and Janssen JD (1997). Quadriphasic mechanics of swelling incompressible media. Int J Eng Sci 35: 793–802
Jirasek M (1998) Computational modelling of concrete structures, Balkema, Rotterdam, chap Embedded crack models for concrete fracture, pp 291–300
Jouanna P, Abellan MA (1995) Modern issues in non-saturated soils, Springer, Heidelberg, chap Generalized approach to heterogeneous media
Lewis RW and Schrefler BA (1998). The finite element method in the static and dynamic deformation and consolidation of porous media, 2nd edn. Wiley, Chichester
van Loon R, Huyghe JM, Wijlaars MW and Baaijens FPT (2003). 3d fe implementation of an incompressible quadriphasic mixture model. Int J Numer Methods Eng 57: 1243–1258
Meschke G and Grasberger S (2003). Numerical modeling of coupled hygromechanical degradation of cementitious materials. J Eng Mech 129(4): 383–392
Moës N, Dolbow J and Belytschko T (1999). A finite element method for crack growth without remeshing. Int J Numer Methods Eng 46(1): 133–150
Remmers JJC, de Borst R and Needleman A (2003). A cohesive segments method for the simulation of crack growth. Comput Mech 31: 69–77
Réthoré J, Gravouil A and Combescure A (2005). A combined space time extended finite element method. Int J Numer Methods Eng 64: 260–284
Réthoré J, Gravouil A and Combescure A (2005). An energy conserving scheme for dynamic crack growth with the extended finite element method. Int J Numer Methods Eng 63: 631–659
Réthoré J, Abellan MA and Borst R (2007). A discrete model for the dynamic propagation of shear bands in a fluid-saturated medium. Int J Numer Anal Methods Geomech 31: 347–370
Réthoré J, de Borst R, Abellan MA (2007b) A two-scale approach for fluid flow in fractured porous media. Int J Numer Methods Eng. doi: 10.1002/nme.1962
Schrefler BA, Secchi S and Simoni L (2006). On adaptive refinement techniques in multi-field problems including cohesive fracture. Comput Methods Appl Mech Eng 195(4–6): 444–461
Snijders H, Huyghe JM and Janssen JD (1995). Triphasic finite element model for swelling porous media. Int J Numer Methods Fluids 20: 1039–1046
Terzaghi K (1943). Theoretical soil mechanics. Wiley, New York
Wells GN and Sluys LJ (2001). Discontinuous analysis of softening solids under impact loading. Int J Numer Anal Methods Geomech 25: 691–709
Wells GN and Sluys LJ (2001). A new method for modeling cohesive cracks using finite elements. Int J Numer Methods Eng 50: 2667–2682
Wells GN, de Borst R and Sluys LJ (2002). A consistent geometrically non-linear approach for delamination. Int J Numer Methods Eng 54: 1333–1355
Wells GN, Sluys LJ and de Borst R (2002). Simulating the propagation of displacement discontinuities in a regularized strain–softening medium. Int J Numer Methods Eng 53: 1235–1256
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License ( https://creativecommons.org/licenses/by-nc/2.0 ), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Réthoré, J., de Borst, R. & Abellan, MA. A two-scale model for fluid flow in an unsaturated porous medium with cohesive cracks. Comput Mech 42, 227–238 (2008). https://doi.org/10.1007/s00466-007-0178-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-007-0178-6